Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: One DMZ server reverse proxy for 2 websites
Special Forums UNIX and Linux Applications One DMZ server reverse proxy for 2 websites Post 303014320 by dakelly on Friday 9th of March 2018 08:31:47 AM
Old 03-09-2018
Quote:
Originally Posted by hicksd8
On a client on which WP2 loads "super-slow" what happens if you put WP2's IP address in the URL instead of its hostname? Let's prove that the slowness is not a problem in resolving the name.

Also, if you ping WP2 from that client using first the hostname and second the IP address is the response the same speed-wise?
I attached an image of what i am trying to do in my original post.


Anyway, using the IP from the DMZ server to the WP1 & WP2 have no difference in speed. WP1 loads fine, WP2 loads very slow

---------- Post updated at 01:31 PM ---------- Previous update was at 01:21 PM ----------

Quote:
Originally Posted by gull04
Hi,

I think I would start with some basics here assuming that the IP's are different, you could try;
  1. Ping the IP Addresses from your work station, check that they are around the same.
  2. Ping the URL for each and look for obvious differences to the IP Address pings.
  3. Run a traceroute from each and look for differences.
  4. Check and make sure that the reverse lookup is the same.

You could also look at things like the network config, between the switches if they are physically different.

It would also be worth looking at the /etc/network/interfaces file on the proxy.

There are just so many possibilities here, it will have to be a process of elimination.

Regards

Gull04
ping & traceroute blocked between networks here, sorry.

Network A these servers are all VMs and on the same subnet.
 

9 More Discussions You Might Find Interesting

1. Linux

Reverse Proxy

I have configured reverse proxy through apache...conf file is attached My reverse proxy has a public ip.it is redirecting the request to 172.16.1.43 which is http server.....Now i have a link in Http server's home page which will redirect the request to another Lan zone machine... (0 Replies)
Discussion started by: dipanrc
0 Replies

2. UNIX for Dummies Questions & Answers

Reverse Proxy difficulty

Hi I am trying to set up two hosts in a reverse proxy. The reverse proxy already has 8 servers running perfectly, but they are all simply mapping pure addresses, which I have registered internally and externally. The latest two I wish to add are a bit different, they are app servers, one... (1 Reply)
Discussion started by: rboekdrukker
1 Replies

3. IP Networking

Software/tool to route an IP packet to proxy server and capture the Proxy reply as an

Hi, I am involved in a project on Debian. One of my requirement is to route an IP packet in my application to a proxy server and receive the reply from the proxy server as an IP packet. My application handles data at the IP frame level. My application creates an IP packet(with all the necessary... (0 Replies)
Discussion started by: Rajesh_BK
0 Replies

4. UNIX for Advanced & Expert Users

How do you manage your DMZ server accounts?

I'd just like to know what you use for user account management on your DMZ servers? Do you use the same authentication realm as internally? Do you use a different authentication realm, perhaps only for the DMZ? Do you use local accounts? (2 Replies)
Discussion started by: humbletech99
2 Replies

5. UNIX for Advanced & Expert Users

Apache-Reverse proxy and load balancing

Hi All, I have a webpage loaded on server1 with authorization enabled by .htaccess, which can be accessed by http://ipofserver1/index.html. Now im planning a high availabilty load balancing in such a way that if the server1 is down due to some reason it should connect to another server. i have... (1 Reply)
Discussion started by: Tuxidow
1 Replies

6. UNIX for Advanced & Expert Users

Setup a Reverse Proxy on Squid

Hi all, The scenario is: http://img834.imageshack.us/img834/7990/1234z.jpg - With: + 192.168.100.0/24 : internet link (simulation) + Multiple Websites are hosting in local. + Complete DNS configuration. + OS: CentOS 5 - Requirements: Configure Squid Proxy as... (0 Replies)
Discussion started by: kidzer0
0 Replies

7. Web Development

Perhaps, different websites on same Apache server.

Reading Apache documentation I come to understand that it can host different websites, either by FQDN or IP address, virtually. Is it possible for an Apache server to run two sites, and no one be able to tell from outside, that they are hosted in the same server? If not possible. Essentially,... (2 Replies)
Discussion started by: Aia
2 Replies

8. Red Hat

Configuration Reverse Proxy - https issue

Hi All I need your valuable help on this. Im trying to setup reverse proxy using apache in rhel 5.5. I just started with Apache, and not much idea about going with advance level config, except that i have tried to set up this reverse proxy based on an online guide i found in internet. The... (0 Replies)
Discussion started by: niyas_gk
0 Replies

9. IP Networking

Reverse proxy tutorials for webserver?

Hi, one member of WJ forum adviced that i setup an reverse proxy for my webserver. So im curious if anyone know about good, easy noob tutorial on hwo to achieve this, please link to this tutorial how to setup reverse proxy for an webserver. Or better for whole node server with OpenVZ... (1 Reply)
Discussion started by: postcd
1 Replies

LEARN ABOUT SUNOS

gnome-network-preferences

gnome-network-preferences(1)					   User Commands				      gnome-network-preferences(1)

NAME

       gnome-network-preferences - configure network proxy

SYNOPSIS

       gnome-network-preferences [gnome-std-options]

DESCRIPTION

       The  Network  Proxy preference tool enables you to configure how your system connects to networks. You can configure the desktop to connect
       to a proxy server, and specify the details of the proxy server. A proxy server is a server that intercepts requests to another server,  and
       fulfills the request itself, if it can. You can enter the Domain Name Service (DNS) name or the Internet Protocol (IP) address of the proxy
       server.

OPTIONS

       The following options are supported:

       gnome-std-optionStandard options available for use with most GNOME applications. See gnome-std-options(5).

EXAMPLES

       Example 1: Launching the Network Proxy preference tool

       example% gnome-network-preferences

EXIT STATUS

       The following exit values are returned:

       0	Application exited successfully

       >0	Application exited with failure

FILES

       The following files are used by this application:

       /usr/bin/gnome-network-pExecutable for Network Proxy preferences tool

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+------------------------------+
       |      ATTRIBUTE TYPE	     |	     ATTRIBUTE VALUE	    |
       +-----------------------------+------------------------------+
       |Availability		     |SUNWgnome-desktop-preferences |
       +-----------------------------+------------------------------+
       |Interface stability	     |External			    |
       +-----------------------------+------------------------------+

SEE ALSO

       Preference Tools Manual

       Latest version of the GNOME Desktop User Guide for your platform.

       gnome-std-options(5)

NOTES

       Written by Glynn Foster, Sun Microsystems  Inc., 2003.

SunOS 5.10							    2 Oct 2003					      gnome-network-preferences(1)
All times are GMT -4. The time now is 03:30 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy