Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: One DMZ server reverse proxy for 2 websites
Special Forums UNIX and Linux Applications One DMZ server reverse proxy for 2 websites Post 303014319 by gull04 on Friday 9th of March 2018 08:17:41 AM
Old 03-09-2018
Hi,

I think I would start with some basics here assuming that the IP's are different, you could try;
  1. Ping the IP Addresses from your work station, check that they are around the same.
  2. Ping the URL for each and look for obvious differences to the IP Address pings.
  3. Run a traceroute from each and look for differences.
  4. Check and make sure that the reverse lookup is the same.

You could also look at things like the network config, between the switches if they are physically different.

It would also be worth looking at the /etc/network/interfaces file on the proxy.

There are just so many possibilities here, it will have to be a process of elimination.

Regards

Gull04
Last edited by gull04; 03-09-2018 at 09:19 AM.. Reason: Correction
This User Gave Thanks to gull04 For This Post:
dakelly
 

9 More Discussions You Might Find Interesting

1. Linux

Reverse Proxy

I have configured reverse proxy through apache...conf file is attached My reverse proxy has a public ip.it is redirecting the request to 172.16.1.43 which is http server.....Now i have a link in Http server's home page which will redirect the request to another Lan zone machine... (0 Replies)
Discussion started by: dipanrc
0 Replies

2. UNIX for Dummies Questions & Answers

Reverse Proxy difficulty

Hi I am trying to set up two hosts in a reverse proxy. The reverse proxy already has 8 servers running perfectly, but they are all simply mapping pure addresses, which I have registered internally and externally. The latest two I wish to add are a bit different, they are app servers, one... (1 Reply)
Discussion started by: rboekdrukker
1 Replies

3. IP Networking

Software/tool to route an IP packet to proxy server and capture the Proxy reply as an

Hi, I am involved in a project on Debian. One of my requirement is to route an IP packet in my application to a proxy server and receive the reply from the proxy server as an IP packet. My application handles data at the IP frame level. My application creates an IP packet(with all the necessary... (0 Replies)
Discussion started by: Rajesh_BK
0 Replies

4. UNIX for Advanced & Expert Users

How do you manage your DMZ server accounts?

I'd just like to know what you use for user account management on your DMZ servers? Do you use the same authentication realm as internally? Do you use a different authentication realm, perhaps only for the DMZ? Do you use local accounts? (2 Replies)
Discussion started by: humbletech99
2 Replies

5. UNIX for Advanced & Expert Users

Apache-Reverse proxy and load balancing

Hi All, I have a webpage loaded on server1 with authorization enabled by .htaccess, which can be accessed by http://ipofserver1/index.html. Now im planning a high availabilty load balancing in such a way that if the server1 is down due to some reason it should connect to another server. i have... (1 Reply)
Discussion started by: Tuxidow
1 Replies

6. UNIX for Advanced & Expert Users

Setup a Reverse Proxy on Squid

Hi all, The scenario is: http://img834.imageshack.us/img834/7990/1234z.jpg - With: + 192.168.100.0/24 : internet link (simulation) + Multiple Websites are hosting in local. + Complete DNS configuration. + OS: CentOS 5 - Requirements: Configure Squid Proxy as... (0 Replies)
Discussion started by: kidzer0
0 Replies

7. Web Development

Perhaps, different websites on same Apache server.

Reading Apache documentation I come to understand that it can host different websites, either by FQDN or IP address, virtually. Is it possible for an Apache server to run two sites, and no one be able to tell from outside, that they are hosted in the same server? If not possible. Essentially,... (2 Replies)
Discussion started by: Aia
2 Replies

8. Red Hat

Configuration Reverse Proxy - https issue

Hi All I need your valuable help on this. Im trying to setup reverse proxy using apache in rhel 5.5. I just started with Apache, and not much idea about going with advance level config, except that i have tried to set up this reverse proxy based on an online guide i found in internet. The... (0 Replies)
Discussion started by: niyas_gk
0 Replies

9. IP Networking

Reverse proxy tutorials for webserver?

Hi, one member of WJ forum adviced that i setup an reverse proxy for my webserver. So im curious if anyone know about good, easy noob tutorial on hwo to achieve this, please link to this tutorial how to setup reverse proxy for an webserver. Or better for whole node server with OpenVZ... (1 Reply)
Discussion started by: postcd
1 Replies

LEARN ABOUT MOJAVE

perlhaiku5.18

PERLHAIKU(1)						 Perl Programmers Reference Guide					      PERLHAIKU(1)

NAME

       perlhaiku - Perl version 5.10+ on Haiku

DESCRIPTION

       This file contains instructions how to build Perl for Haiku and lists known problems.

BUILD AND INSTALL

       The build procedure is completely standard:

	 ./Configure -de
	 make
	 make install

       Make perl executable and create a symlink for libperl:

	 chmod a+x /boot/common/bin/perl
	 cd /boot/common/lib; ln -s perl5/5.18.2/BePC-haiku/CORE/libperl.so .

       Replace 5.18.2 with your respective version of Perl.

KNOWN PROBLEMS

       The following problems are encountered with Haiku revision 28311:

       o   Perl cannot be compiled with threading support ATM.

       o   The ext/Socket/t/socketpair.t test fails. More precisely: the subtests using datagram sockets fail. Unix datagram sockets aren't
	   implemented in Haiku yet.

       o   A subtest of the ext/Sys/Syslog/t/syslog.t test fails. This is due to Haiku not implementing /dev/log support yet.

       o   The tests lib/Net/Ping/t/450_service.t and lib/Net/Ping/t/510_ping_udp.t fail. This is due to bugs in Haiku's network stack
	   implementation.

CONTACT

       For Haiku specific problems contact the HaikuPorts developers: <http://ports.haiku-files.org/>

       The initial Haiku port was done by Ingo Weinhold <ingo_weinhold@gmx.de>.

       Last update: 2008-10-29

perl v5.18.2							    2014-01-06							      PERLHAIKU(1)
All times are GMT -4. The time now is 08:40 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy