At the ok prompt type:
and check the values of autoboot?, boot-command, boot-file and boot-device. The first and second should be true and boot respectively. You may need to change the fourth one to disk0 with the command:
You may need to issue the following command to make it permanent:
Andrew
Hey !
I am running EWS-UX/V (Rel 4.2) on NEC EWS/4800/330 station and I am having problems rebooting my station : I am getting the following message on display : BOOT : PANIC : File size out of range.
According to user guide, this error is occuring when a file exceeding the limit and/or... (2 Replies)
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Dear all,
A p505 Server with AIX 5.3 is running our backofice System.
It contains several Data Bases that its DB is on individual VG
I have a big utilization at the OS Disks,
Please see bellow topas results.
Any ideas?
Thanks in advance
George Govotsis
... (5 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Dear i have two internal disks in one production system some LVs are created in hdisk0 and the remaining are created in hdisk1 i want to move all this LVs to hdisk0 and make the hdisk1 free to install my application .
lspv -l hdisk0
hdisk0:
LV NAME LPs PPs DISTRIBUTION MOUNT POINT
hd4 16... (1 Reply)
Hello,
I have a problem with my machine that won't boot properly.
The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to... (18 Replies)