Your root pool is almost full, has only 4% left:
You are strongly advised to leave more free space in active ZFS pools as otherwise, the performance will suffer a lot due to the system trying to find free space and the data fragmentation resulting from the lack of contiguous areas. Not exceeding 80% is a safe bet.
Back to the topic, the "long" name reported for the oradata disk (c4t500A09828DE3E799d0) suggests a storage array is used to build this pool.
Exanding the oradata1 pool might then be achieved simply by enlarging the underlying LUN. Depending on your ZFS settings, nothing more might be required.
You might want to post these commands output for us to get a better idea about your configuration:
Hi,
I try add a new file system:
#zfs create dsk1/mqm
it came back with:
#cannot create 'dsk1/mqm': no such pool 'dsk1'
what do I have to do?
Kind regards
Mehrdad (2 Replies)
Hello all,
I'm trying to grow a file system by 500MB using SMIT on AIX 5.2 but I receive this error:
"0516-404 allocp: This system cannot fulfill the allocation request.
There are not enough free partitions or not enough physical volumes
to keep strictness and satisfy allocation requests.... (3 Replies)
Dear Gurus of Unix.
When I Put this command:
# iostat -E
cmdk0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: SAMSUNG SV4012H Revision: Serial No: 0540J1BTC53208 Size: 40.06GB <40060403712 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal... (6 Replies)
I am working on a server where the 'root' user ZFS filesystem.
Now when I do Top commands it says only 750M free .But when I count the actual memory utilized it comes only to 12 GB and the total size of the server is 32G.
I think rest of the space is held up by ZFS file system.
Is there a... (5 Replies)
Hi All,
I am using this commands to dynamically increase ZFS swap space on Solaris
my question is:
1- after i make these commands it will permanent or it will remove after restart
2- how to make it permanent
# swap -l
swapfile dev swaplo bloques libre
/dev/zvol/dsk/rpool/swap... (4 Replies)
Hi,
I have Solaris-10 (Update-7). This is having ZFS file-system and 10 sparse-root zones are there. I want to install Solaris-10 recommended patch cluster on it, but not sure, how to go ahead with procedure. I want to patch one side of the mirror and keep intact another side safe in case of... (6 Replies)
Hi, I need to expand a ZFS volume from 500GB to 800GB. I'd like to ask your help to confirm the following procedure:
Can I do it on the fly without bothering the users working on this volume?
Thank you in advance! (6 Replies)
Hi All,
I have Solaris-10 configured with two non-global zones. All file-systems are mounted on global zone and data file-systems are mounted on non-global zone as lofs.
I have added 4 luns of 100 GB each and still not able to extend a file-system. This is production server, so I can not... (5 Replies)
Hello I hope everyone is having a good day!
Situation:
2540 with 3.6TB of usable space
volume A is 2.6TB
volume B was 1TB
Volume A is mounted via a single lun on a solaris server and is running out of space.
Volume B was used on another server but is no longer, I deleted the volume in... (7 Replies)
Discussion started by: Metasin
7 Replies
LEARN ABOUT CENTOS
amzfs-sendrecv
AMZFS-SENDRECV(8) System Administration Commands AMZFS-SENDRECV(8)NAME
amzfs-sendrecv - Amanda script to create zfs sendrecv
DESCRIPTION
amzfs-sendrecv is an Amanda application implementing the Application API. It should not be run by users directly. It create a zfs snapshot
of the filesystem and backup the snapshot with 'zfs send'. Snapshot are kept after the backup is done, this increase the disk space use on
the client but it is neccesary to be able do to incremental backup. If you want only full backup, you can disable this feature by setting
the KEEP-SNAPSHOT property to 'NO'. Only the restoration of the complete backup is allowed, it is impossible to restore a single file.
The application is run as the amanda user, it must have many zfs priviledge:
zfs allow -ldu AMANDA_USER mount,create,rename,snapshot,destroy,send,receive FILESYSTEM
Some system doesn't have "zfs allow", but you can give the Amanda backup user the rights to manipulate ZFS filesystems by using the
following command:
usermod -P "ZFS File System Management,ZFS Storage Management" AMANDA_USER
This will require that your run zfs under pfexec, set the PFEXEC property to YES.
The format of the diskdevice in the disklist (DLE) must be one of:
Desciption Example
-----------------
Mountpoint /data
ZFS pool name datapool
ZFS filesystem datapool/database
ZFS logical volume datapool/dbvol
The filesystem doesn't need to be mounted.
PROPERTIES
This section lists the properties that control amzfs-sendrecv's functionality. See amanda-applications(7) for information on the
Application API, application configuration.
DF-PATH
Path to the 'df' binary, search in $PATH by default.
KEEP-SNAPSHOT
If "YES" (the default), snapshot are kept after the backup, if set to "NO" then snapshot are no kept and incremental backup will fail.
ZFS-PATH
Path to the 'zfs' binary, search in $PATH by default.
PFEXEC-PATH
Path to the 'pfexec' binary, search in $PATH by default.
PFEXEC
If "NO" (the default), pfexec is not used, if set to "YES" then pfexec is used.
EXAMPLE
In this example, a dumptype is defined to use amzfs-sendrecv application to backup a zfs filesystem.
define application-tool amzfs_sendrecv {
comment "amzfs-sendrecv"
plugin "amzfs-sendrecv"
#property "DF-PATH" "/usr/sbin/df"
#property "KEEP-SNAPSHOT" "YES"
#property "ZFS-PATH" "/usr/sbin/zfs"
#property "PFEXEC-PATH" "/usr/sbin/pfexec"
#property "PFEXEC" "NO"
}
define dumptype user-zfs-sendrecv {
program "APPLICATION"
application "amzfs_sendrecv"
}
SEE ALSO amanda(8), amanda.conf(5), amanda-client.conf(5), amanda-applications(7)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHOR
Jean-Louis Martineau <martineau@zmanda.com>
Zmanda, Inc. (http://www.zmanda.com)
Amanda 3.3.3 01/10/2013 AMZFS-SENDRECV(8)