My first comments would be that even in single user, the device is active. You would need to go to single user from external media, e.g.
The process may work, but the geometry of the disk may not give you a workable boot disk.
Can I presume that you are trying to create a bootable disk? For Solaris (and I last did it back to 2.6!) it was a ufsdump to tape. You can then ufsrestore it to another filesystem. You would first have to prepare the disk by booting to single user from CD and using format to slice it up (we didn't have Veritas or anything) but then there's more about devices to be cleaned up & regenerated because the hardware was different on the recovery server etc.
It is no easy task to work through but simple to follow once we'd proved it. Alas that has all gone many years past and I cannot recall it all.
Hello folks,
I have a sun sparcstation 20, I would like to upgrade one of the hard disks to a larger one. The one I would like to upgrade only contains user data. Here are my thoughts:
1. Backup the specific file system
2. Replace the disk with the larger disk
3. Create a new file... (2 Replies)
Hi there!
I received the following error message
The hard disk at channel 2, target 1 had a soft error.
The output of a system check reveiled the following (see entry <2,1> ):
SWXCR xcr0 error counters:
RAID Array 200 Controller Family Information Utility V1.03... (1 Reply)
I have just been assigned the task of upgrading to a larger disk on a e250; however, I am use to working on Linux and x86 hardware. I would be very appreciative if someone could inform me on how this procedure can be done safely.
To begin with, the e250 has a 18 Gig primary scsi disk and a 18... (3 Replies)
Hi,
I am a newbie to Solaris. I want to know how to find out the controller target and disk number on a SunFire V890 box that has 6X72GB disks. The probe-scsi output is as shown below:
/pci@8,600000/SUNW,qlc@2
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 ... (1 Reply)
Hello,
Can anybody please tell me the command to find out the filesystem or a file which is consuming larger disk space sing i want to find out the file and want to compress it
please help me out
any help would be appreciated (6 Replies)
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Hi Solaris 10 Experts,
I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)