Check out the output of (output here is from one of my machines)..
Notice the MAJOR,MINOR numbers above
So rootvg-tmp coresponds with /dev/dm-4 device.
vgdisplay -v will provide output which physical volumes belong to which volume group.
These 2 Users Gave Thanks to Peasant For This Post:
I have some questions regarding disk perfomance, and what I can do to make it just a little (or much :)) more faster.
From what I've heard the first partitions will be faster than the later ones because tracks at the outer edges of a hard drive platter simply moves faster. But I've also read in... (4 Replies)
Hello,
I have a aix 570 system with san disk. I do write test of performance
in a lv with four disk. While the test I run filemon tools for trace
the disk activity. The outputs of filemon are at the en of this message. I
see my lV(logical volume) throughput at 100 meg by second. 2 of 4
disk... (0 Replies)
I'm search for a disk exerciser / load tool like iometer, iozone, diskx for IBM AIX 5.2 and 5.3
Because of a very bad disk performance on several AIX systems, I need to have a tool which is able to generate a disk load on my local and SAN disks.
Does somebody knows a kind of tool which is... (5 Replies)
I am getting absolutely dreadful iowait stats on my disks when I am trying to install some applications.
I have 2 physical disks on which I have created 2 separate logical volume groups and a logical volume in each. I have dumped some stats as below
My dual core CPU is not being over utilised... (3 Replies)
Running CentOS 5.5:
I've come across a relatively recent problem, where in the last 2 months or so, the root disk goes to 99% utilization for about 20 seconds when a user logs in. This occurs whether a user logs in locally or via ssh. I have tried using lsof to track down the process that is... (5 Replies)
Dear All,
I have a hard disk in solaris on which the write performanc is too slow.
The CPU , RAM memory are absolutely fine.
What might be reason.
Kindly explain.
Rj (9 Replies)
What tools/utilities do you use to generate metrics on disk i/o throughput on Solaris. For example, if I want to see the i/o rate of random or sequential r/w. (2 Replies)
Hello,
we have a machine with Solaris Express 11, 2 LSI 9211 8i SAS 2 controllers (multipath to disks), multiport backplane, 16 Seagate Cheetah 15K RPM disks.
Each disk has a sequential performance of 220/230 MB/s and in fact if I do a
dd if=/dev/zero of=/dev/rdsk/<diskID_1> bs=1024k... (1 Reply)
Hello guys,
I have two servers performing the same disk operations. I believe one server is having a disk's impending failure however I have no hard evidence to prove it. This is a pair of Netra 210's with 2 drives in a hardware raid mirror (LSI raid controller). While performing intensive... (4 Replies)