Check out the output of
Locate the disk with 252:2 major/minor number.
Check if that disk is local disk and blacklist that disk so multipath is not active.
Post output of :
Rescan the fabric. You have some cards inside from manufacturer X.
Check out the documentation regarding scanning from Linux host, i cannot say for sure.
Most makers provide some sort of utilities to rescan (scripts etc.).. you will have to figure that one out
---------- Post updated at 17:41 ---------- Previous update was at 17:37 ----------
Sorry i cannot edit posts (issue with browser ), it will just double post.
Read the documentation on provided links.
You will need to configure the multipath.conf, instructions are there (Configuring storage devices).
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)
Hi everyone , i m working on Sun solaris and i have a file "smsapp.cur" which has information like this paragraph given below , there are millions of such paragraphs
From:923212802736
To:923222326807
logMessage: 07-04-08 17:34:29 Getting message topup from code page default in language English... (2 Replies)
hi friends how we can create luns in A1OOO storage ..plzhelp its very urgent
when ever i am connect to A1000 raid controller through laptop with console cable with the help of hyperterminal..i isued serial port parameters which i mentioned below..
Set serial port parameters to:
�... (1 Reply)
I need to read the last line of a log file and save it, sleep for X minutes and read the last line again. If the line is the same, exit 1, otherwise sleep for X minutes until the last line contains 'Status: Process completed'. Can anyone offer advice here? Thanks. (2 Replies)
In Solaris the administrator has to update /kernel/drv/sd.conf file to tell the sd driver to scan for a broader range of scsi devices.
Can someone please tell me what file needs to be update in Redhat Linux 5 for the same.
Second part of the question is WWN for HBA's can be found (atleast in my... (1 Reply)
Hi,
Need help ...I want to create multiple directories in different /file systems using for loop..eg.../ORCL_data01/oradata/orcl/ctl.
../ORCL_data01/oradata/orcl/data.
../ORCL_data01/oradata/orcl/redo.
Script :-
=========
for dir in `ls -d... (8 Replies)
Hi
Please I dont have a lot of redhat skills, but I need some help on creating a file system.
I need to rescan for this new LUN, so I try to check existing LUNs:
fdisk -l
Disk /dev/sda: 299.4 GB, 299439751168 bytes
255 heads, 63 sectors/track, 36404 cylinders
Units = cylinders of... (8 Replies)
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Gents,
Please can you help.
I want to create a list which contends the complete patch of the location of some directories with the size of each file.
need to select only .txt file
In this case I am try to find the subdirectories tp1 and tp2 and create the output list.
jd175-1
tp1... (3 Replies)
I am trying to use bash to automate the scan of a specific directory using clamav. Having this in place is a network requirement. The below is an attempt to:
1. count the extensions (.txt, .jpeg) in a directory and write them to a virus-scan.log (section in bold)
2. scan each folder in the... (6 Replies)
Discussion started by: cmccabe
6 Replies
LEARN ABOUT DEBIAN
byobu-select-backend
byobu-select-backend(1) byobu byobu-select-backend(1)NAME
byobu-select-backend - select your default Byobu backend window manager
SYNOPSIS
byobu-select-backend [screen|tmux]
DESCRIPTION
byobu-select-backend is an application that lists the available Byobu backends and allows you to select your default.
You can select one of either screen(1) or tmux(1) on the command line, or giving no command line parameters, the utility will run interac-
tively.
This utility will only affect which backend is used by default when simply running, byobu(1). Note that at any time, you can force the
backend of a particular session by running the helpers, byobu-screen(1) or byobu-tmux(1).
FILES
~/.byobu/backend
SEE ALSO byobu(1), byobu-screen(1), byobu-tmux(1), screen(1), tmux(1)
http://launchpad.net/byobu
AUTHOR
This manpage and the utility were written by Dustin Kirkland <kirkland@ubuntu.com> for Ubuntu systems (but may be used by others). Permis-
sion is granted to copy, distribute and/or modify this document and the utility under the terms of the GNU General Public License, Version
3 published by the Free Software Foundation.
The complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL on Debian/Ubuntu systems, or in
/usr/share/doc/fedora-release-*/GPL on Fedora systems, or on the web at http://www.gnu.org/licenses/gpl.txt.
byobu 30 Oct 2011 byobu-select-backend(1)