I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
Is there a limit to the number of LUNS that can be concatenated using Solaris Volume manager with Soft partitions?
I have worked with some AIX admins in the past and there was such a limitation therefore limiting the size the filesystem could grow to.
Is there such a limitation in Solaris 9... (6 Replies)
hi,
what are the steps to detect and configure a new attached lun in Solaris 10.
Is there any difference between cfgadm and luxadm command ?
rgds,
snjksh (5 Replies)
How to get LUN WWN (i.e LUN mapped from a storage box say Symmetrix or clariion) in Solaris. fcinfo command does give the Target port wwn but what i'm looking for is the LUN WWN. Any help is appreciated. (2 Replies)
Hello to all,
Actually, currently on my Solaris box, I've a LUN (5TB space) from a EMC storage which is working fine, and a partition with ZFS filesystem is created for that LUN. as further you'll see in the logs, the "c4t6006016053802E00E6A9196B6506E211d0s2" is the current configured LUN in the... (4 Replies)
Hi,
I've noticed that mpathadm states that one of our luns has no active paths:
/dev/rdsk/c6t60000970000298700009533031324333d0s2
Total Path Count: 4
Operational Path Count: 4
/dev/rdsk/c6t60000970000298700009533031333037d0s2
... (3 Replies)
Hi all, I have the following LUN which is showing OK with its two paths:
DEVICE PROPERTIES for disk: /dev/rdsk/c23t500507630A3BC579d123s2
Vendor: IBM
Product ID: 2107900
Revision: 3010
Serial Num: 75WB0114900
Unformatted capacity:... (13 Replies)
Discussion started by: ludiegu
13 Replies
8. Post Here to Contact Site Administrators and Moderators