I have to check for a directory content: every time it is filled with a file, I have to launch a bash script.
So: how to do an ls every 5 minutes (avoiding cron), telling the script to start if the file has appeared in the dir?
Have you got better ideas?
Thanks in advance! (5 Replies)
Dear all,
I am a newbie in solaris and I need your advice.
I have a Solaris version 5.9 installed on Sunfire V240.
I am able to ssh the machine from putty remotely.
My problem is that I cannot see the display from KVM switch I have connected to it. I need also to be able to see the GUI... (2 Replies)
Hi all
I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface?
If you have any ideas, please tell me then. Thank you (2 Replies)
This is my situation
DOS pc serial cable (sl0) Linux Pc eth1
192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router)
I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface.
... (3 Replies)
I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without... (1 Reply)
Hi, please help with below time conversion to minutes.
one column values:
2 minutes 16 seconds 420 msec
43 seconds 750 msec
0 days 3 hours 29 minutes 58 seconds 480 msec
11 seconds 150 msec
I need output in minutes(total elapsed time in minutes) (2 Replies)
Hi all,
System Ubuntu 16.04.3 LTS
i have the following log
INFO 2019-02-07 15:13:31,099 module.py:700] default: "POST /join/8550614e-3e94-4fa5-9ab2-135eefa69c1b HTTP/1.0" 500 2042
INFO 2019-02-07 15:13:31,569 module.py:700] default: "POST /join/6cb9c452-dcb1-45f3-bcca-e33f5d450105... (15 Replies)
Hello all,
Info:
System RedHat 7.5
I need to create a script that based on the creation time,
if the file is older then 5 minutes then execute some stuff, if not exit.
I thought to get the creation time and minutes like this.
CreationTime=$(stat -c %y /tmp/test.log | awk -F" " '{ print... (3 Replies)
Discussion started by: charli1
3 Replies
LEARN ABOUT DEBIAN
pcapinfo
PCAPINFO(1p) User Contributed Perl Documentation PCAPINFO(1p)NAME
pcapinfo - Prints detailed information about the network devices
SYNOPSIS
pcapinfo
OPTIONS
None.
DESCRIPTION
pcapinfo prints detailed information about the network devices and Pcap library available on the current host. Here is an example:
Host information
----------------
Hostname : fangorn.maddingue.net
Aliases : fangorn.local fangorn
Pcap version : libpcap version 0.8.3
Devices information
-------------------
Device eth0 (default)
Description : No description available
Link type : Ethernet, no autonegotiation, 10baseT-HD, link ok
Hardware address : 00:0c:6e:0a:c3:ca
Network address : 10.0.1.51
Network mask : 255.255.255.0
Flags : up running broadcast multicast
Device eth1
Description : No description available
Link type : Ethernet, no autonegotiation, 10baseT-HD, link ok
Hardware address : 00:26:54:0a:d8:4d
Network address : 192.168.1.51
Network mask : 255.255.255.0
Flags : up running broadcast multicast
The device marked as "(default)" is the one returned when calling "Net::Pcap::lookupdev()"
Some information like the link type can only be gathered with administrative privileges.
AUTHOR
Sebastien Aperghis-Tramoni, <sebastien@aperghis.net>
COPYRIGHT
Copyright (C) 2005, 2006, 2007, 2008 Sebastien Aperghis-Tramoni. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.14.2 2008-01-01 PCAPINFO(1p)