Thanks for the reply. Pl find the below outputs of the Server implemented Hardware raid. Kindly guide me , I have not done patching in these Hardware raid implemented Servers.
1. Uname -a :
2.
3. df -h
Thanks and regards ,
Rj
Last edited by DukeNuke2; 01-11-2015 at 02:25 PM..
I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Hi,
I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1"
The System did come preinstalled as it comes from sun. I did not do much on it.
I booted system using boot cdrom -s
gave format... (6 Replies)
Hi,
I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds.
I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this?
AVAILABLE DISK SELECTIONS:
0.... (12 Replies)
Hi,
I have a question. Do LiveUpgrade supports hardware raid?
How to choose the configuration of the system disk for Solaris 10 SPARC?
1st Hardware RAID-1 and UFS
2nd Hardware RAID-1 and ZFS
3rd SVM - UFS and RAID1
4th Software RAID-1 and ZFS
I care about this in the future to take... (1 Reply)
Hi all
I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS.
The documentation doesn't make it clear if:
1. The... (6 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Dear All ,
We need to do patching on one Solaris Server , where we have raid 0 configured.
What is the process to patch a Server if RAID 0 (Concat/Stripe) is there.
Below is the sample output.
# metadb
flags first blk block count
a m pc luo 16 ... (1 Reply)
Dear All ,
Pl find the below command ,
# raidctl -l
Controller: 1
Volume:c1t0d0
Disk: 0.0.0
Disk: 0.1.0
Disk: 0.3.0
#
raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size ... (10 Replies)
Discussion started by: jegaraman
10 Replies
LEARN ABOUT OPENSOLARIS
blk2scsa
blk2scsa(7D) Devices blk2scsa(7D)NAME
blk2scsa - SCSA block device emulation
DESCRIPTION
The blk2scsa module provides support services for generic block devices so that they appear to the system as devices on a virtual SCSI bus,
thus allowing them to be serviced by the sd(7D) SCSI disk driver. The blk2scsa device supports the SCSI-2 command set for Direct Access
Devices. The blk2scsa device supports multiple LUNs per physical device and creates a separate child device for each LUN. All child nodes
attach to sd(7D).
DEVICE SPECIAL FILES
Disk block special file names are located in /dev/dsk. Raw file names are located in /dev/rdsk. See sd(7D).
IOCTLS
See dkio(7I)ERRORS
See sd(7D).
FILES
Device special files for the storage device are created in the same way as those for a SCSI disk. See sd(7D) for more information.
/dev/dsk/cntndnsn
Block files for disks.
/dev/rdsk/ctndnsn
Raw files for disks.
/kernel/misc/blk2scsa
32-bit ELF kernel module (x86).
/kernel/misc/amd64/blk2scsa
64-bit ELF kernel module (x86).
/kernel/misc/sparcv9/blk2scsa
64-bit ELF kernel module (SPARC).
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC, x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWckr |
+-----------------------------+-----------------------------+
SEE ALSO eject(1), rmformat(1), rmmount(1), cfgadm_scsi(1M), fdisk(1M), mount(1M), umount(1M), scsi(4), vfstab(4), attributes(5), sd(7D), dkio(7I),
pcfs(7FS)
802.11b Standard for Wireless Local Area Networks (WLANs) - IEEE
SunOS 5.11 28 Feb 2008 blk2scsa(7D)