Please refer to the X4100 M2 manual.
The relevant page is a follows: (cut and pasted)
Changing POST Options
These instructions are optional, but you can use them to change the operations that
the server performs during POST testing.
1. Initialize the BIOS Setup utility by pressing the F2 key while the system is
performing the power-on self-test (POST).
The BIOS Main menu screen is displayed.
2. When the BIOS Main menu screen is displayed, select Boot.
The Boot Settings screen is displayed.
3. When the Boot Settings screen is displayed, select Boot Settings Configuration.
The Boot Settings Configuration screen is displayed.
4. On the Boot Settings Configuration screen, there are several options that you can
enable or disable:
■
Quick Boot: This option is disabled by default. If you enable this, the BIOS skips
certain tests while booting, such as the extensive memory test. This decreases the
time it takes for the system to boot.
■
System Configuration Display: This option is disabled by default. If you enable
this, the System Configuration screen is displayed before booting begins.
■
Quiet Boot: This option is disabled by default. If you enable this, the Sun
Microsystems logo is displayed instead of POST codes.
■
Language: This option is reserved for future use. Do not change.
■
Add On ROM Display Mode: This option is set to Force BIOS by default. This
option has effect only if you have also enabled the Quiet Boot option, but it
controls whether output from the Option ROM is displayed. The two settings for
this option are as follows:
■
Force BIOS: Remove the Sun logo and display Option ROM output.
■
Keep Current: Do not remove the Sun logo. The Option ROM output is not
displayed.
■
Boot Num-Lock: This option is On by default (keyboard Num-Lock is turned on
during boot). If you set this to off, the keyboard Num-Lock is not turned on
during boot.
■
Wait for F1 if Error: This option is disabled by default. If you enable this, the
system will pause if an error is found during POST and will only resume when
you press the F1 key.
■ Interrupt 19 Capture: This option is reserved for future use. Do not change.