I think there is no other way then pulling the drive... also you can pull all disks and run the probe-scsi-all command again for every single disk to see if one of your disks is bad. also note, it is probe-scsi-all!
Ah, thanks... That was the problem, I forgot it was
As for the results of it... I am very pleased, as it revealed:
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Hey !
I am running EWS-UX/V (Rel 4.2) on NEC EWS/4800/330 station and I am having problems rebooting my station : I am getting the following message on display : BOOT : PANIC : File size out of range.
According to user guide, this error is occuring when a file exceeding the limit and/or... (2 Replies)
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Hi Solaris 10 Experts,
I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)
Hello,
I have a problem with my machine that won't boot properly.
The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to... (18 Replies)
Discussion started by: Zorken
18 Replies
LEARN ABOUT LINUX
grub-probe
GRUB-PROBE(8) System Administration Utilities GRUB-PROBE(8)NAME
grub-probe - probe device information for GRUB
SYNOPSIS
grub-probe [OPTION]... [PATH|DEVICE]
DESCRIPTION
Probe device information for a given path (or device, if the -d option is given).
-d, --device
given argument is a system device, not a path
-m, --device-map=FILE
use FILE as the device map [default=/boot/grub/device.map]
-t, --target=(fs|fs_uuid|fs_label|drive|device|partmap|abstraction)
print filesystem module, GRUB drive, system device, partition map module or abstraction module [default=fs]
-h, --help
display this message and exit
-V, --version
print version information and exit
-v, --verbose
print verbose messages
REPORTING BUGS
Report bugs to <bug-grub@gnu.org>.
SEE ALSO grub-fstest(1)
The full documentation for grub-probe is maintained as a Texinfo manual. If the info and grub-probe programs are properly installed at
your site, the command
info grub-probe
should give you access to the complete manual.
grub-probe (GRUB) 1.99-12ubuntu5 October 2011 GRUB-PROBE(8)