Thanks for the response, here is an example, i'll focus on just the second column
input
The purpose is to reduce the data for an x,y scatterplot, because the file is millions of lines long. Instead of plotting every point, I want to take an average of every "n" number of points, and plot that one number. Bin might not be the correct word, perhaps a "rolling-average"? For example a bin of 3 would break the data down like so:
Output would then be:
For the case where bin is 2
Finally, doing this for both the x and y axis (the original file), for bin of 3:
Input:
Many thanks, I hope this is more clear
Torch
A few questions: I'm trying to use Bash (although I'm not against using AWK) to try to accomplish a few things, but I'm stumped on a few points.
I'm learning most of the basics quickly: but there are a few things I can't figure out.
1. I'm trying to count the number of .txt files in a... (3 Replies)
I am writing a awk script that gathers certain data from certain fields. I needed a awk solution for this, because it will later become a function in the script.
I have the following data that I need output on a single line, but record spans across multilple lines and records are not... (7 Replies)
Hello! Well, I searched and wasn't able to find a specific example of my dilemma, so hopefully someone could assist? Or maybe there was an example but I missed it?
I have two files:
file1 = order data file
file2 = list of 65,000+ order numbers
I would like to extract from 'file1' any... (5 Replies)
Hi, I am working with files containing 2 columns in which i need to come up with the frequency/count of values in col. 2 falling within specifics binned values of col. 1. the contents of a sample file is shown below:
15 12.5
15 11.2
16 0.2
16 1.4
17 1.6
18 4.5
17 5.6
12 8.6
11 7.2
9 ... (13 Replies)
cat doc | nawk -v da="${date}" '$23>199 {print $0 > "doc"+da+".txt"}'
Every time(need to run every day) i run this, i want to a create a new file "doc_01 Aug.txt".
Basically, i want to create a new file with date appended in it.
The above command is creating a file with name "0".... (4 Replies)
Hi all,
I think so I’m getting the result is wrong, while using following awk commend,
colval=$(awk 'FNR>1 && NR==FNR{a=$4;next;} FNR>1 {a+=$4; print $2"\t"a/3}'
filename_f.tsv filename_f2.tsv filename_f3.tsv)
echo $colval >> Result.tsv
it’s doing the condition 2 times, first result... (5 Replies)
Hi, i want to print 2nd column value with the below script. I need to take input of the string i need to search in that file and file name. How can i take these two as inputs? using read command? Getting error for below script.
echo "enter SID"
read SID
echo "enter filename"
read filename... (8 Replies)
# more minusf.awk
#!/bin/awk -f
BEGIN {
FS=":";
}
{
if ( $2 == "" ) {
print $1 ": no password!";
}
}
# ./minusf.awk aa aa aa aa
awk: can't open aa (6 Replies)
I wish to use AWK to do something akin: Select all 2D data with 1<$1<2 and -7.5<$2<-6.5
But it's not working
awk 'END {print ($1<=2&&$1>=1&&$2<=-6.5&&$2>=-7.5)}' bla
Data:
-1.06897 -8.04482 -61.469
-1.13613 -8.04482 -61.2271
-1.00182 -8.04482 -61.2081
-1.06897 -8.13518 -60.8544... (2 Replies)
I would like to create bins to get histogram with totals and percentage, e.g. starting from 0.
If possible to set the minimum and maximum value in the bins ( in my case value min=0 and max=20 )
Input file
8 5
10 1
11 4
12 4
12 4
13 5
16 7
18 9
16 9
17 7
18 5
19 5
20 1
21 7 (10 Replies)
Discussion started by: jiam912
10 Replies
LEARN ABOUT MOJAVE
locale::codes::langfam
Locale::Codes::LangFam(3pm) Perl Programmers Reference Guide Locale::Codes::LangFam(3pm)NAME
Locale::Codes::LangFam - standard codes for language extension identification
SYNOPSIS
use Locale::Codes::LangFam;
$lext = code2langfam('apa'); # $lext gets 'Apache languages'
$code = langfam2code('Apache languages'); # $code gets 'apa'
@codes = all_langfam_codes();
@names = all_langfam_names();
DESCRIPTION
The "Locale::Codes::LangFam" module provides access to standard codes used for identifying language families, such as those as defined in
ISO 639-5.
Most of the routines take an optional additional argument which specifies the code set to use. If not specified, the default ISO 639-5
language family codes will be used.
SUPPORTED CODE SETS
There are several different code sets you can use for identifying language families. A code set may be specified using either a name, or a
constant that is automatically exported by this module.
For example, the two are equivalent:
$lext = code2langfam('apa','alpha');
$lext = code2langfam('apa',LOCALE_LANGFAM_ALPHA);
The codesets currently supported are:
alpha
This is the set of three-letter (lowercase) codes from ISO 639-5 such as 'apa' for Apache languages.
This is the default code set.
ROUTINES
code2langfam ( CODE [,CODESET] )
langfam2code ( NAME [,CODESET] )
langfam_code2code ( CODE ,CODESET ,CODESET2 )
all_langfam_codes ( [CODESET] )
all_langfam_names ( [CODESET] )
Locale::Codes::LangFam::rename_langfam ( CODE ,NEW_NAME [,CODESET] )
Locale::Codes::LangFam::add_langfam ( CODE ,NAME [,CODESET] )
Locale::Codes::LangFam::delete_langfam ( CODE [,CODESET] )
Locale::Codes::LangFam::add_langfam_alias ( NAME ,NEW_NAME )
Locale::Codes::LangFam::delete_langfam_alias ( NAME )
Locale::Codes::LangFam::rename_langfam_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangFam::add_langfam_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangFam::delete_langfam_code_alias ( CODE [,CODESET] )
These routines are all documented in the Locale::Codes::API man page.
SEE ALSO
Locale::Codes
The Locale-Codes distribution.
Locale::Codes::API
The list of functions supported by this module.
http://www.loc.gov/standards/iso639-5/id.php
ISO 639-5 .
AUTHOR
See Locale::Codes for full author history.
Currently maintained by Sullivan Beck (sbeck@cpan.org).
COPYRIGHT
Copyright (c) 2011-2013 Sullivan Beck
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.18.2 2013-11-04 Locale::Codes::LangFam(3pm)