04-27-2012
So I understand that the installation is trying to figure out where the CD-ROM and HDD is, but I am not able to get to the point after choosing the location of the CD in the installation process. Right after I choose it,
it scans the CD, then as you have said it looks for the HDD. But when it begins that process, it gets Error 22 while getting fs type.
The motherboard only supports SATA, but has options such as compatibility mode and enhanced mode. Only in compatibility mode is it able to detect the CD-ROM when I enter installation, it does not detect the CD-ROM in the installation process for any other mode. So the bios is setup to have both CD-ROM and HDD in compatibility mode.
I have also noticed that the %disk output on the device output(before pressing "Enter" to begin installation) shows the following:
%disk 0x01F0-0x01F7 14 - type=W0 unit=0 cyls=9964 hds-255 secs=63
I've compared that output with the 5.0.7 pre-installation output, and the cyls seem to be completely different as well, it being cyls=16709.
Not sure if that matters though.
9 More Discussions You Might Find Interesting
1. SCO
Hello Valued Members,
I was wondering if there are any Linux, BSD, versions that can run SCO 5.0.6 applications without much modification? I was looking into purchasing a copy of Caldera Openlinux, the last version, but wanted to ask if there are any other options of a newer variant. I am also... (8 Replies)
Discussion started by: stay0ut
8 Replies
2. SCO
Dear all,
I'm newbie in SCO. I already purchase SCO 5.0.7 and SATA Tape Drive (not SCSI) for IBM server. not a cheap investment :(
my problem is:
I can't use my sata tape on sco 5.0.7 for backup my data because sco can't detect any sata tape has been plug into o/s. i already running "mkdev... (7 Replies)
Discussion started by: asumatezuka
7 Replies
3. SCO
Is SATA hard disk is suooprted by SCO OpenServer 5.05? If No, how to couter this problem. If yes, please provide the installation steps. (2 Replies)
Discussion started by: rakeshkumar9919
2 Replies
4. SCO
Hi
I am looking for sco xenix binary compatibility utility "cvtomf",(convert omf object to COFF object)
Would you please help me ?
tnx (3 Replies)
Discussion started by: javad1_maroofi
3 Replies
5. SCO
Hi
How to increase maximum number of open file in "sco xenix binary" running in "sco unix openserver 5.0.7" ?
I have changed "NOFILES" kernel parameter to 512, but xenix binray can't open more than 60.
tnx (4 Replies)
Discussion started by: javad1_maroofi
4 Replies
6. AIX
Hi,
IBM documentation says the CPU Compatibility Mopde can be changed from th HMC in LPAR properties, but i have no option to change it there, it is only displayed. Anyone?
Regards, firefox111 (6 Replies)
Discussion started by: firefox111
6 Replies
7. AIX
Hello,
One of my colleagues is working on a p730 without HMC, only one LPAR has all resources.
The server is showing some issues with Informix (10.00 & 11.50), the same config (OS & IFX) works perfectly on Power6 so I would like to ask him to change the processor compatibility mode to power6 on... (3 Replies)
Discussion started by: fapl
3 Replies
8. Web Development
hi
i have code in iplanet webserver in obj.conf file
<If $uri !~'^/app/literature/item/(.*)'>
AuthTrans fn="set-variable" insert-srvhdrs="X-UA-Compatible:IE=EmulateIE8"
</If>
i want to migrate it to apache webserver need your help to replace the above code for apache webserver.
i... (0 Replies)
Discussion started by: raghur77
0 Replies
9. UNIX for Beginners Questions & Answers
Good evening,
I should make a full image copy of the 1 terabyte hard drive on an HP WX4600 workstation and is present as the only Sco OpenServer 6 operating system, which I need to run a very old corporate accounting program. Logically, Sco OpenServer 6 on this workstation has been regularly... (7 Replies)
Discussion started by: NIGHTPRINCE79
7 Replies
LEARN ABOUT DEBIAN
readdvd
readdvd(1) readdvd 1.0 readdvd(1)
NAME
readdvd - is creating an image of your source dvd media or medias even if it has / they have corrupted blocks
SYNOPSIS
readdvd [-l] [-h]
readdvd -d DEVICE1 [-d DEVICE2] [-d ...] -o file.iso [-s #] [-v] [-vv]
DESCRIPTION
readdvd reads even a corrupted dvd and writes the the result into a new image file on your harddisk.
DEVICE
can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.
Linux:
/dev/hdX: IDE device
/dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
/dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device
OpenBSD/NetBSD:
/dev/rcdX
FreeBSD:
/dev/cd: SCSI device
/dev/acd: ATA device
MacOS X:
/dev/disk:
win32:
C:,D:,E:, ... X:,Y:,Z:
OPTIONS
-l scan busses for all available CD and DVD devices
-h help shows available options.
-o file.iso
write data to imagefile named file.iso
-s # read source media with selected speed
-v use verbose mode
-vv use extended verbose mode
INTERACTIVE MODUS
q stop reading media and exit
w save sector map which is currently read and continue with the next one
EXAMPLES
readdvd -d /dev/sr0 -o filename.iso -s 8 -v
create an image filename.bin of inserted media in device /dev/sr0 with read speed 8 in verbose mode.
please report man page improvements to T.Maguin@web.de
Gennady ShultZ Kozlov 10. April, 2009 readdvd(1)