Hi All,
I have to remove the disk from SVM.
Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion.
Thanks in anticipation! (10 Replies)
gurus,
i have configured the LUN's in solaris 10.after labeled the disk,i have added the disk into one of the soft partition using metattach d0 c5t1000d10s6.actully before that i should confiure the powermt and than i should have add metattch d0 emcpowerc2.i forget to do that and increased... (0 Replies)
Really sorry for the long posting. But i would really want to clear all the doubts.
I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main).
Creating state database replica:
metadb -a -c3 -f c0t0d0s7
... (3 Replies)
I am trying to set up a new server. It has 8 HD's in it. I am using 2 for the system disk. IE set one up mirror to the other. I am using the other 6 as data disks. For those I want to concat 3 together, mirror to the other 3 (also concated together of course) and then make various soft... (7 Replies)
i have taken two separate disk
A and B
created 4 slices in each
A b
s4 s4
s5 s5
s6 s6
s7 s7
took slices s4 of A and slice s6 0f B ---created a meta device d0
took slices s4 of B and slice s6 0f A---created a meta device d1
created main mirror d2 using d0... (1 Reply)
HI,
I added by error to a submirror some disks :
metattach d53 c2t90d0s0 c2t90d1s0 ... instead of doing a stripe by disk (like that) :
metattach d53 c2t90d0s0
metattach d53 c2t90d1s0
..
then, I did a growfs -M to expand FS and the size isn't correct.
I tried to launch a... (1 Reply)
How to list out multiple Disk sets in SVM
# metaset -s <disksetname> --- This will list out only one diskset
but I need a list of disk sets configured for the node.
Is there any command,please let me know ...
Thanks in advance. (1 Reply)
Hello
I want to ask that how to mount and run fsck in SVM disk.In my scenario if i have to disks c0t0d0 and c0t1d0 these two disks are in Mirroring (raid1) if i want to run fsck on the disks than below are the right steps?
ok boot cdrom -s
mount /dev/dsk/c0t0d0s0 /a
cd /a
fsck... (3 Replies)
Dear All,
I face some errors in SVM.Need help.
Actually couple of days ago i got a call from one of the customer mentioning that one of the sub-mirror was in Need maintance state. So we replaced that disk. After Replacing the disk it comes back to "Okay" State.
But the Error are... (3 Replies)
Discussion started by: sudhansu
3 Replies
LEARN ABOUT DEBIAN
metaonline
metaoffline(1M) System Administration Commands metaoffline(1M)NAME
metaoffline, metaonline - place submirrors offline and online
SYNOPSIS
/usr/sbin/metaoffline -h
/usr/sbin/metaoffline [-s setname] [-f] mirror submirror
/usr/sbin/metaonline -h
/usr/sbin/metaonline [-s setname] mirror submirror
DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the
submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back
online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror
remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command
differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely
remove a submirror from a mirror, use the metadetach command.
A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted.
When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the
regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif-
ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only
effective on a submirror of a mirror that has been taken offline.
The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode.
A submirror that has been taken offline with the metaoffline command can only be mounted as read-only.
OPTIONS
Root privileges are required for all of the following options except -h.
-f Forces offlining of submirrors that have slices requiring maintenance.
-h Displays usage message.
-s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com-
mand to perform its administrative function within the specified diskset. Without this option, the command will perform
its function on local metadevices.
mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online.
submirror Specifies the metadevice name of the submirror to be either taken offline or put online.
EXAMPLES
Example 1: Taking a Submirror Offline
This example takes one submirror, d9, offline from mirror d10.
# metaoffline d10 d9
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWmdu |
+-----------------------------+-----------------------------+
SEE ALSO mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M),
metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4),
md.tab(4), attributes(5), md(7D)
Solaris Volume Manager Administration Guide
NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode.
SunOS 5.10 12 Apr 2004 metaoffline(1M)