09-08-2011
hi,
512mb is a little bit on the small side but it should work... have you checked the HCL against your hardware? also you can try to strip down your hardware to a minimum configuration (take out all PCI cards and so on...) and try again.
9 More Discussions You Might Find Interesting
1. Solaris
Deard all, I installed Solaris 8 in a SUN machine, and after Solaris and Language modules installed, the result is that CDE is not working, also single user mode is only available.
I tried with all init stages and the same result.
Can someone advice me what to check (Some log file) or what to... (1 Reply)
Discussion started by: mmviejo
1 Replies
2. UNIX for Dummies Questions & Answers
I have Pentium 4 CPU with 3 GHZ
500MB of RAM w/ 120 GB of HDD space. I am trying to install Sun Solaris 9 (x86).
I saw somewhere to on-line to get Device Configuration Assistant, but I am not sure where or if you guys have any documentations on this issue.
This is the error I am getting:
... (1 Reply)
Discussion started by: vtsao
1 Replies
3. Solaris
Hi there, new to unix/linux, please excuse me!
I am trying to install Solaris 10 on a machine, and after some teething problems (on another thread) I have got so far with the installation and am now getting an different error:
Warning
Error : The Solaris CD/DVD you inserted is not compatible... (3 Replies)
Discussion started by: gavin watson
3 Replies
4. Solaris
I am trying to install Solaris 10 on a target machine which is t1000. ( sun4v). I have configured my jumpstart server to install solaris over WAN. when i boot my machine, the wanboot image gets downloaded properly, miniroot gets downloaded properly, but after that the process fails with the... (3 Replies)
Discussion started by: hemalsid
3 Replies
5. Solaris
Hi ,
I am installing gcc 3.4.6 on SunOS labcvs001sm 5.9 Generic_117171-07 sun4u sparc
SUNW,Ultra-5_10 . The isa info is 'sparcv'.
I have the following with me
a)gcc-3.4.6.tar
b)gcc-3.4.6-sol9-sparc-local
c)libiconv-1.11-sol9-sparc-local
d) binutils-2.18.tar.gz
e)... (8 Replies)
Discussion started by: sonu2die4
8 Replies
6. Solaris
Hi Admins,
I came across an error while installing patch cluster on solaris.
# ./installcluster --s10cluster
ERROR: Another instance of an install script is already running for target
boot
environment '/'.
I did killed the related processes. Now there is no any process running from ps... (1 Reply)
Discussion started by: snchaudhari2
1 Replies
7. Solaris
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
Discussion started by: admin_xor
1 Replies
8. Solaris
Hello,
My Solaris 10 on VMWare Workstation crashed and was giving me so many errors i decided to re install it but after selecting the type of Solaris installation this error comes up:
Warning: /pci@0,0/pci15ad,79011/pci15ad,770@3 (echi0): No SOF interrupts have been recieved, this USB EHCI... (0 Replies)
Discussion started by: runell
0 Replies
9. Solaris
Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error.
Any ideas? (1 Reply)
Discussion started by: psychocandy
1 Replies
VX(4) BSD/i386 Kernel Interfaces Manual VX(4)
NAME
vx -- 3Com EtherLink III / Fast EtherLink III (3c59x) Ethernet driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device vx
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_vx_load="YES"
DESCRIPTION
The vx driver provides support for the 3Com ``Vortex'' chipset.
The medium selection can be influenced by the following link flags to the ifconfig(8) command:
link0 Use the AUI port.
link1 Use the BNC port.
link2 Use the UTP port.
HARDWARE
The vx driver supports the following cards:
o 3Com 3c590 EtherLink III PCI
o 3Com 3c592 EtherLink III EISA
o 3Com 3c595 Fast EtherLink III PCI in 10 Mbps mode
o 3Com 3c597 Fast EtherLink III EISA in 10 Mbps mode
DIAGNOSTICS
vx%d: not configured; kernel is built for only %d devices. There are not enough devices in the kernel configuration file for the number of
adapters present in the system. Add devices to the configuration file, rebuild the kernel, and reboot.
All other diagnostics indicate either a hardware problem or a bug in the driver.
CAVEATS
Some early-revision 3c590 cards are defective and suffer from many receive overruns, which cause lost packets. The author has attempted to
implement a test for it based on the information supplied by 3Com, but the test resulted mostly in spurious warnings.
The performance of this driver is somewhat limited by the fact that it uses only polled-mode I/O and does not make use of the bus-mastering
capability of the cards.
SEE ALSO
arp(4), netintro(4), ng_ether(4), ifconfig(8)
HISTORY
The vx device driver first appeared in FreeBSD 2.1. It was derived from the ep driver, from which it inherits most of its limitations.
AUTHORS
The vx device driver and this manual page were written by Fred Gray <fgray@rice.edu>, based on the work of Herb Peyerl and with the assis-
tance of numerous others.
BUGS
The vx driver is known not to reset the adapter correctly following a warm boot on some systems.
The vx driver has not been exhaustively tested with all the models of cards that it claims to support.
BSD
July 16, 2005 BSD