i'm writing some code to simulate the boot progress after power on
but when i try to read the 2nd sector from a floppy disk, this operation always fail with ah=0x80h which means timeout, how can i get over this problem?
my code would be like this:
looking forward to replies.
really appreciate any suggestion.
any idea on how to timeout the read statement for ksh?
for bash u can use read -t option
-t timeout
Cause read to time out and return failure if a complete
line of input is not read within timeout seconds. This
option has ... (2 Replies)
Is there a way to determine the number of available spare sectors on a disk ? as it may be useful for notifying a user to take a backup of the disk before it runs into a medium error. (6 Replies)
hello every one ,
this is my first participation in the forum , I hope it'll be a good start
within a script I would like to put some code to read i\p from standard i\p using read command if it reads Y it will terminate the script if it reads N it will continue execution , if no i\p is... (2 Replies)
I found a document: Bad block HOWTO for smartmontools
My hard drive is Maxtor:
root]# fdisk -lu /dev/hda
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x3f4e3f4d
... (0 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
i'm writing some code to simulate the boot progress after power on
but when i try to read the 2nd sector from a floppy disk, this operation always fail with ah=0x80h which means timeout, how can i get over this problem?
my code would be like this:
$ cat boot.S
.code16
#define SETUPLEN 4... (0 Replies)
i'm writing some code to simulate the boot progress after power on
but when i try to read the 2nd sector from a floppy disk, this operation always fail with ah=0x80h which means timeout, how can i get over this problem?
my code would be like this:
$ cat boot.S
.code16
#define SETUPLEN 4... (0 Replies)
Hi All,
i am trying to get sectors,cylinders,track..etc information of all present disks out of solaris machine using prtvtoc command .
Output of ptrvtoc command is as below :
bash-3.2# prtvtoc /dev/dsk/c1t0d0s0
* /dev/dsk/c1t0d0s0 partition map
*
* Dimensions:
* 512 bytes/sector... (2 Replies)
I saw several thread for this issue but none addresses my issue.
I have tried read -t but the result is read bad options
My requirement is
1. Ask for input
2. If input = y or no input in 60 seconds
then continue processing
else
exit
fi
Kindly consider this urgent. (8 Replies)
Hi all,
I have a EFI disk and it is use in zfs pool.
partition> p
Volume: rpool
Current partition table (original):
Total disk sectors available: 1172107117 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 usr wm ... (8 Replies)
Discussion started by: javanoob
8 Replies
LEARN ABOUT CENTOS
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)