08-24-2011
How configure micromax bsnl 3G modem in KPPP on slackware 13.1
How configure micromax bsnl 3G modem in KPPP on slackware 13.1 while it automatically mounted under
/dev/sr1 iso9660 /media/modem
and in lsusb command add following information:
Bus 001 Device 020: ID 1c9e:f000
now i follow these steps for usb switch to modem
usb_modeswitch.conf File
DefaultVendor= 0x1c9e |
DefaultProduct= 0xf000 |
TargetVendor= 0x1c9e |
TargetProduct= 0x9605 |
# only for reference |
MessageEndpoint=0x01 |
MessageContent="55534243123456788000000080000606f50402527000000000000000000000" |
run the program:
usb_modeswitch -C usb_modeswitch.conf
modprobe cdc_acm
modprobe usbserial vendor=0x1c9e product=0x9605
now connect with KPP
in Device->modem device-> dev/ttyUSB2, it detect modem and when query
modem by :
modem->Query Modem->Modem Query Result Window show following same string in
each AT1-AT7 field
AT1 :- Manufacturer: "Micromax" Model: Micromax MMX310G 3G USB Modem Revision: LQA0094.1.1_MG32 IMEI: 910532501142484 +GCAP: +CGSM,+FCLASS,+DS
AT2 :- Manufacturer: "Micromax" Model: Micromax MMX310G 3G USB Modem Revision: LQA0094.1.1_MG32 IMEI: 910532501142484 +GCAP: +CGSM,+FCLASS,+DS
so on...
Now Connect
Looking Modem pass
Modem Ready Pass
Initializing Modem hang the overall process & login script display window
show expecting Ok and hang
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have Linux RedHat7.1 and I have this modem
RockWell HCF 56KDATA Fax PCI Modem.
I don't know how to configure this modem. Can anybody please help me out.
I tried "linuxconf" it does not recognize this command. Pleas help me out.
Regards
-Iftikhar (1 Reply)
Discussion started by: syedifti
1 Replies
2. UNIX Desktop Questions & Answers
I am using Slackware 7 on my IBM Thinkpad. I am unable to configure it to display a graphical environment. Typing startx usually generates a few errors. The system, however, does boot into the shell environment without any issues or problems. I have been able to setup Slackware 7 successfully... (2 Replies)
Discussion started by: adrienb
2 Replies
3. UNIX for Dummies Questions & Answers
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies
4. Solaris
hi,
can u pls help to configure modem on SUN system for the inbound dialing.....so that i can connect to the system remotely through modem..........thx
girish (2 Replies)
Discussion started by: girish_shukla
2 Replies
5. Solaris
Dear All,
i have problem during install modem dial up with smc in solaris 10.
i can't find "login" because it's stop in _receive started transmit started.
thanks for your attention.
this is the list during i dial to this number :
altconn called
Device Type ACU wanted... (0 Replies)
Discussion started by: mr.ridho
0 Replies
6. SuSE
I bought a wireless modem from '' 3 ''.
It has software for Windows users.
I talked to their support center.
They know nothing about Linux.
In Ubuntu, I looked at System --> Administration --> Network
I have to click the unlock in the dialog.
It recognized wired connections; there... (0 Replies)
Discussion started by: Angelo
0 Replies
7. Solaris
Dear Friends,
Kindly help me to connect Broadband connection in my Solaris 10 OS.
I have heard that i have to write a script.
Waiting for solution.........
Thanks (0 Replies)
Discussion started by: anuragpauldani
0 Replies
8. Hardware
Hello everybody,
I'm having troubles with Slackware 13.1 and network cards.
I have one on-board Ethernet card (which is recognized and works okay) and a PCI Ethernet card (which is also recognized, but doesn't appear in 'ifconfig -a'). If i run a 'lspci', i can see the kernel recognized the... (5 Replies)
Discussion started by: semash!
5 Replies
9. Solaris
Hi all,
I am a newbie in UNIX . Earlier I used opensuse 11.3 just because it was secure
for connecting to the INTERNET than Windows. Now I have to use Solaris for my work, so I was thinking of having windows XP2,opensuse 11.3 and solaris on the same pc. In spite of some good suggestion from... (5 Replies)
Discussion started by: M.Choudhury
5 Replies
LEARN ABOUT OPENDARWIN
size
SIZE(1) General Commands Manual SIZE(1)
NAME
size - print the size of the sections in an object file
SYNOPSIS
size [ option ... ] [ object ... ]
DESCRIPTION
Size (without the -m option) prints the (decimal) number of bytes required by the __TEXT, __DATA and __OBJC segments. All other segments
are totaled and that size is listed in the `others' column. The final two columns is the sum in decimal and hexadecimal. If no file is
specified, a.out is used.
The options to size(1) are:
- Treat the remaining arguments as name of object files not options to size(1).
-m Print the sizes of the Mach-O segments and sections as well as the total sizes of the sections in each segment and the total size of
the segments in the file.
-l When used with the -m option, also print the addresses and offsets of the sections and segments.
-x When used with the -m option, print the values in hexadecimal (with leading 0x's) rather than decimal.
-arch arch_type
Specifies the architecture, arch_type, of the file for size(1) to operate on when the file is a fat file. (See arch(3) for the cur-
rently know arch_types.) The arch_type can be "all" to operate on all architectures in the file. The default is to display only
the host architecture, if the file contains it; otherwise, all architectures in the file are shown.
SEE ALSO
otool(1)
BUGS
The size of common symbols can't be reflected in any of the numbers for relocatable object files.
Apple Computer, Inc. May 23, 2002 SIZE(1)