Appologies, I ment Ubuntu 10.04, still bit of a noob here
I retried to recompile, after clean, mrporper, olconfig I did a new menuconfig. Now I think I enable as much as possible and set the proccesor family up better (maybe this will do anything good), but it's still quite confusing where to look as I have hardly any idea what those conigurations mean. After a lot of hassle I solved the ipipe_o error, but now it goes on about this;
Code:
CC arch/x86/xenomai/hal-common.o
arch/x86/xenomai/hal-common.c: In function ‘rthal_latency_above_max’:
arch/x86/xenomai/hal-common.c:333: error: implicit declaration of function ‘die_nmi’
make[1]: *** [arch/x86/xenomai/hal-common.o] Error 1
make: *** [arch/x86/xenomai] Error 2
I know If I disable Xenomai altogether it should compile, but I think that got me in a mess earlier. Could you please advise on proper config settings?
Thanks.
Hi,
I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed:
Boot device: net file and args:
Network link setup failed
Please check cable and try... (3 Replies)
Hi all ,
i was trying to upgrade firmware on machine 7028-6E4 and it failed .
Now machine does not boot anymore , i can not get SMC menu either ...
What are my options ?
Thanks,
Rahim (1 Reply)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Solaris system
version 6
I cloned the drive using the DD command.
Using the format command and examining the partitions, all looks the same as the original drive.
Problem:
When I attach the cloned drive as the master, and only drive in system, it will not boot.
Error messages:
... (9 Replies)
I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed.
I tried diffrent Linux distributions, but nothing works.
This are the partitions, maybe it's... (12 Replies)
Hello:
NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
First of all, I'd like to preface this post by relaying that I have considerable experience with FreeBSD but I'm a Linux newb. I've been attempting to compile linux-2.6.29.3 from source and I'm having some problems and have a few newb questions...
a) First of all, my kernel won't boot, it fails... (0 Replies)
Our system is not booting up properly. It keeps going to this screen:
Enter Run Level (0-6, s or S):
I tried to hit all nos# 0-6 is just goes to hung state.
Tried s or S & it brings me to single user mode. I've checked the file systems & found out that all three had 98%. I tried to... (86 Replies)
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Discussion started by: gacanepa
0 Replies
LEARN ABOUT MOJAVE
kernel-install
KERNEL-INSTALL(8) kernel-install KERNEL-INSTALL(8)NAME
kernel-install - Add and remove kernel and initramfs images to and from /boot
SYNOPSIS
kernel-install COMMAND KERNEL-VERSION [KERNEL-IMAGE]
DESCRIPTION
kernel-install is used to install and remove kernel and initramfs images to and from /boot.
kernel-install will execute the files located in the directory /usr/lib/kernel/install.d/ and the local administration directory
/etc/kernel/install.d/. All files are collectively sorted and executed in lexical order, regardless of the directory in which they live.
However, files with identical filenames replace each other. Files in /etc/kernel/install.d/ take precedence over files with the same name
in /usr/lib/kernel/install.d/. This can be used to override a system-supplied executables with a local file if needed; a symbolic link in
/etc/kernel/install.d/ with the same name as an executable in /usr/lib/kernel/install.d/, pointing to /dev/null, disables the executable
entirely. Executables must have the extension ".install"; other extensions are ignored.
An executable should return 0 on success. It may also return 77 to cause the whole operation to terminate (executables later in lexical
order will be skipped).
COMMANDS
The following commands are understood:
add KERNEL-VERSION KERNEL-IMAGE
kernel-install creates the directory /boot/MACHINE-ID/KERNEL-VERSION/ and calls executables from /usr/lib/kernel/install.d/*.install
and /etc/kernel/install.d/*.install with the arguments
add KERNEL-VERSION
/boot/MACHINE-ID/KERNEL-VERSION/ KERNEL-IMAGE
The kernel-install plugin 50-depmod.install runs depmod for the KERNEL-VERSION.
The kernel-install plugin 90-loaderentry.install copies KERNEL-IMAGE to /boot/MACHINE-ID/KERNEL-VERSION/linux. It also creates a boot
loader entry according to the boot loader specification in /boot/loader/entries/MACHINE-ID-KERNEL-VERSION.conf. The title of the entry
is the PRETTY_NAME parameter specified in /etc/os-release or /usr/lib/os-release (if the former is missing), or "Linux KERNEL-VERSION",
if unset. If the file initrd is found next to the linux file, the initrd will be added to the configuration.
remove KERNEL-VERSION
Calls executables from /usr/lib/kernel/install.d/*.install and /etc/kernel/install.d/*.install with the arguments
remove KERNEL-VERSION /boot/MACHINE-ID/KERNEL-VERSION/
kernel-install removes the entire directory /boot/MACHINE-ID/KERNEL-VERSION/ afterwards.
The kernel-install plugin 90-loaderentry.install removes the file /boot/loader/entries/MACHINE-ID-KERNEL-VERSION.conf.
EXIT STATUS
If every executable returns 0 or 77, 0 is returned, and a non-zero failure code otherwise.
FILES
/usr/lib/kernel/install.d/*.install /etc/kernel/install.d/*.install
Drop-in files which are executed by kernel-install.
/etc/kernel/cmdline /proc/cmdline
The content of the file /etc/kernel/cmdline specifies the kernel command line to use. If that file does not exist, /proc/cmdline is
used.
/etc/machine-id
The content of the file specifies the machine identification MACHINE-ID.
/etc/os-release /usr/lib/os-release
The content of the file specifies the operating system title PRETTY_NAME.
SEE ALSO machine-id(5), os-release(5), Boot loader specification[1]
NOTES
1. Boot loader specification
https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
systemd 237 KERNEL-INSTALL(8)
05-30-2011
