Sponsored Content
Operating Systems Solaris How to enable hba port of a two port hba card Post 302498282 by oky on Monday 21st of February 2011 12:51:54 AM
Old 02-21-2011
Does the HBA is recognized in the OS.
if you are not sure, prtdiag -v and grep for version in /var/adm/messages, then check the fcinfo hba-port
 

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Discussion started by: xiaochensg
5 Replies

2. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed.... (0 Replies)
Discussion started by: b_manu78
0 Replies

3. IP Networking

4GB Dual Port HBA

I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB? Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies

4. Solaris

Solaris 10. fcinfo hba-port shows adapter not Found

I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install? Thanks in advance.... (23 Replies)
Discussion started by: Y4Net
23 Replies

5. Solaris

Few things related to HBA port & fcinfo command

Hi Gurus I need to know few things related to HBA port & fcinfo command I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies

6. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

7. Solaris

Which FC HBA card support Solaris9

I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage. in OK prompt, PROBE-SCSI-ALL showing A5000 fc hdds details in ok prompt..... but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000... (3 Replies)
Discussion started by: anysystem
3 Replies

8. Red Hat

HBA card faulty

Hi, How to determine if HBA card in getting faulty from linux host ? any pointers. (2 Replies)
Discussion started by: saurabh84g
2 Replies

9. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

10. Solaris

Solaris 10: how to disable an unused HBA card

Dear all, I have a new Oracle Blade X4-2B server, running Solaris 10. The server comes with a HBA card that will not be used now. It has not fibers connected to it. As a consequence, its leds never stop flashing. My question is: how to disable this HBA card, without removing it physically... (2 Replies)
Discussion started by: Gus1971
2 Replies
HBA_LoadLibrary(3HBAAPI)		      Common Fibre Channel HBA Information Library Functions			  HBA_LoadLibrary(3HBAAPI)

NAME
HBA_LoadLibrary, HBA_FreeLibrary - load and free the resources used by the HBA Common Library SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ] #include <hbaapi.h> HBA_STATUS HBA_LoadLibrary(void); HBA_STATUS HBA_FreeLibrary(void); DESCRIPTION
The HBA_LoadLibrary() function loads the Common Library, which in turn loads each VSL specified in the hba.conf(4) file. The HBA_FreeLibrary() function releases resources held by the Common Library and each loaded VSL. RETURN VALUES
Upon successful completion, HBA_LoadLibrary() and HBA_FreeLibrary() return HBA_STATUS_OK. Otherwise, an error value is returned. ERRORS
See libhbaapi(3LIB) for general error status values. EXAMPLES
Example 1 Load the common library and each VSL. The following example loads the common library and each VSL. if ((status = HBA_LoadLibrary()) != HBA_STATUS_OK) { fprintf(stderr, "HBA_LoadLibrary failed: %d ", status); return; } ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-------------------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-------------------------------------+ |Interface Stability |Standard: FC-MI 1.92 (API version 1) | +-----------------------------+-------------------------------------+ | |Standard: FC-HBA Version 4 (API ver- | | |sion 2) | +-----------------------------+-------------------------------------+ |MT-Level |Safe | +-----------------------------+-------------------------------------+ SEE ALSO
libhbaapi(3LIB), hba.conf(4), attributes(5) T11 FC-MI Specification SunOS 5.11 1 Sep 2003 HBA_LoadLibrary(3HBAAPI)
All times are GMT -4. The time now is 06:03 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy