I would go with ZFS personally. It is much easier to manage. I'll put it this way. Take note of the native solaris device files:
Code:
zpool create newpool mirror c0t0d0 c0t1d0
This creates a two way mirror, creates a file system on it and mounts it at /newpool.
Here is how easy it is to create a RAID5 volume, creates a filesystem on it, and mounts it:
Code:
zpool create raidpool raidz c0t0d0 c0t1d0 c0t2d0
I am not kidding. It only takes one simple command to create a ZFS volume. You can also move external storage devices between different machines with ZFS, create disk quotas, reservations, integrate with Solaris containers, take snapshots, track io statistics, and many other cool things. ZFS is very simple to use, flexible, and cheap. In my opinion its only shortcoming is it doesn't have built in backup and restore tools like ufsdump and ufsrestore (I dont con't zfs send and receive).
And one really big advantage in case of using ZFS.... is delivered with default Solaris 10 installation, so is free
All solaris rescue gurus out there ....
I've a Solaris 2.6 E450 on which my sysadmin guy has deleted every file (not sub-directories) from the /etc directory.
The machine is (was) running Vxvm with the root volume encapsulated.
I've tried booting from CDROM, mounting the root volume... (3 Replies)
I've got a Linux box that I'm pretty sure is having some disk issues. iostat isn't installed, but vmstat is, so i've been trying to use that to do some initial diagnostics while I go through our company's change control process to get iostat installed.
The problem I'm having is that the disks... (4 Replies)
Hi,
Quick question if anyone knows this. Is there a command I can use in Veritas Volume manager on Solaris that will tell me what the name of the SAN I am connected to? We have a number of SANs so I am unsure which one my servers are connected to. Thanks. (13 Replies)
Hi Guys,
I have a doubt either to Reboot the server after Replacing the disk0.
I have two disks under vxvm root mirrored and i had a problem with primary disk so i replace the disk0 failed primary disk and then mirrored. After mirroring is it reboot required ? (7 Replies)
:confused:
Last week I read that VxVM won't work with MPxIO (i don't recall the link) and that it should be unconfigured when installing VxVM. Today I read that VxVM works in "pass-thru" mode with MPxIO and DMP uses the devices presented by MPxIO.
If I create disks with MPxIO and use VxVM to... (1 Reply)
I have VxVM 5.1 running on Solaris-10. I have to increase a application file-system and storage team gave me a lun. After scanning scsi port by cfgadm, I can see them in format output. I labelled it, but I am not able to see them in "vxdisk list".
I already tried commands -->
vxdctl enable... (4 Replies)
I have created a VxVM disk group in AIX7.1. I have tried to added this VxVM disk group in powerHA 6.1. But in cluster VxVM DGs are not listing. Is there any other procedure to add vxvm diskgroup to hacmp.
Please share me steps for adding vxvm diskgroup to hacmp. (6 Replies)
Discussion started by: sunnybee
6 Replies
LEARN ABOUT FREEBSD
zfsboot
ZFSBOOT(8) BSD System Manager's Manual ZFSBOOT(8)NAME
zfsboot -- bootcode for ZFS on BIOS-based computers
DESCRIPTION
zfsboot is used on BIOS-based computers to boot from a filesystem in a ZFS pool. zfsboot is installed in two parts on a disk or a partition
used by a ZFS pool. The first part, a single-sector starter boot block, is installed at the beginning of the disk or partition. The second
part, a main boot block, is installed at a special offset within the disk or partition. Both areas are reserved by the ZFS on-disk specifi-
cation for boot use. If zfsboot is installed in a partition, then that partition should be made bootable using appropriate configuration and
boot blocks described in boot(8).
BOOTING
The zfsboot boot process is very similar to that of gptzfsboot(8). One significant difference is that zfsboot does not currently support the
GPT partitioning scheme. Thus only whole disks and MBR partitions, traditionally referred to as slices, are probed for ZFS disk labels. See
the BUGS section in gptzfsboot(8) for some limitations of the MBR scheme support.
USAGE
zfsboot supports all the same prompt and configuration file arguments as gptzfsboot(8).
FILES
/boot/zfsboot boot code binary
/boot.config parameters for the boot block (optional)
/boot/config alternative parameters for the boot block (optional)
EXAMPLES
zfsboot is typically installed using dd(1). To install zfsboot on the ada0 drive:
dd if=/boot/zfsboot of=/dev/ada0 count=1
dd if=/boot/zfsboot of=/dev/ada0 iseek=1 oseek=1024
If the drive is currently in use, the GEOM safety will prevent writes and must be disabled before running the above commands:
sysctl kern.geom.debugflags=0x10
zfsboot can also be installed in an MBR slice:
gpart create -s mbr ada0
gpart add -t freebsd ada0
gpart create -s BSD ada0s1
gpart bootcode -b /boot/boot0 ada0
gpart set -a active -i 1 ada0
dd if=/boot/zfsboot of=/dev/ada0s1 count=1
dd if=/boot/zfsboot of=/dev/ada0s1 iseek=1 oseek=1024
Note that commands to create and populate a pool are not shown in the example above.
SEE ALSO dd(1), boot.config(5), boot(8), gptzfsboot(8), loader(8), zfsloader(8), zpool(8)HISTORY
zfsboot appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BUGS
Installing zfsboot with dd(1) is a hack. ZFS needs a command to properly install zfsboot onto a ZFS-controlled disk or partition.
BSD September 15, 2014 BSD
10-12-2009
