Jumpstart Installation from X86 machine Post: 302349307

10 More Discussions You Might Find Interesting

1. Solaris

Jumpstart on x86 client- prompt for CD2

Hi I just configured a jumpstart server for x86 and sparc clients. I don't use a dhcp server, so I configured /etc/ethers and did add_install_client to update /etc/bootparams. The sparc installation ist working, but the x86 installation stops after CD1 was successfully installed. What I did: I...

2. Solaris

Jumpstart Solaris 10 x86

I need a little help figuring out why my custom jumpstart network installation is dumping me to a manual install. I am trying to install Solaris 10 (unattended) over the wire from my jumpstart server to an HP Proliant DL380 server but I'm having difficulties with the unattended part. So, what...

3. Solaris

Solaris 10 x86 Jumpstart w/o GUI

Does anyone know how to Jumpstart a Solaris 10 x86 system without the GUI? I would like to keep the Jumpstart and/or Flash Archive install in a console text mode if possible but I've not had much luck finding instructions. I'm guessing this is going to be accomplished from the grub menu with a...

4. Solaris

One time network boot of Jumpstart x86 client

I am trying to find an approach that has been effective for automating the installation of Solaris 10 x86 using Jumpstart technology. I have configured an Jumpstart server and a Solaris dhcp server with appropriate macros for passing the client information about its boot environment. The problem is...

5. Solaris

Jumpstart sparc client using x86 server.

Can I use a Jumpstart enviroment on x86 to install a sparc64 client? The idea is to install Solaris in an virtual environment (Sun Virtual Box) running on a pc (AMD), configure a Jumpstart server, and have a SUN Ultra 60 (sparc64) installed via the Jumpstart server. The SUN has no cdrom...

6. Solaris

Automate Solaris x86 Jumpstart

Hi All, Is there a possible way to fully automate Solaris x86 jumpstart or make the x86 jumpstart unattended? I'm currently checking the possible options on how can I do the x86 jumpstart to be kicked off during midnight. We have an automated jumpstart (start to run from midnight) for...

7. Solaris

jumpstart installation

hi friends, i dont know how to install jumpstart . i have solaris cds( 5 nos.). i tried to install jumpstart but there is no setup_install_server file. What i want to do for installing jumpstart server please help me thanks to all

8. Solaris

custom jumpstart on x86 with DHCP/PXE goes into interactive mode

client boots fine, it gets the ip 192.168.0.10 and the bootfile. Then there is : SunOS 5.10 Version Generic_141445-09 32-bit" ... Configuring devices. Custom JumpStart Reading ZFS config: done Setting up Java. Please wait ... NOTE: Not enough memory for graphical installation. Graphical...

9. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD...

10. Solaris

Installing Solaris x86 using jumpstart does not set the hostname for the target

Installing Solaris x86 using jumpstart does not set the hostname for the target. Any idea where do we need to specify hostname to be set for jumpstart installation.

LEARN ABOUT LINUX

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)