Full Discussion: cut
Top Forums Shell Programming and Scripting cut Post 302340649 by nagendramv on Tuesday 4th of August 2009 06:36:12 AM
Old 08-04-2009
cut


A data looks like this... which is of single line...
Code:
'[ [issuedTo CN= Class 1 Public Certification Authority , OU="(c) , Inc. - For authorized use only", OU= Trust Network, O=" , Inc.", C=US] [fingerPrint [ )] [serialNumber ] [alias class 1 public primary certification authority - g] [validity Valid from .] [version 1] [issuedBy CN= Class 1 Public Primary Certification Authority - ="(c)  , Inc. - For authorized use only", OU= Trust Network, O=" , Inc.", C=US] [ ] ]\n[ [issuedTo CN= - ,OU="(c) , Inc. - For use only", OU= Trust Network, O=" , Inc.",] []

i want to cut this line... when ever "[issuedTo" comes in this line as two separate lines ...

Request for the assistance...

Last edited by zaxxon; 08-04-2009 at 08:46 AM.. Reason: CODE tags
 

3 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Cut Command error cut: Bad range

Hi Can anyone what I am doing wrong while using cut command. for f in *.log do logfilename=$f Log "Log file Name: $logfilename" logfile1=`basename $logfilename .log` flength=${#logfile1} Log "file length $flength" from_length=$(($flength - 15)) Log "from... (2 Replies)
Discussion started by: dgmm
2 Replies

2. UNIX for Beginners Questions & Answers

Cut command: can't make it cut fields

I'm a complete beginner in UNIX (and not a computer science student either), just undergoing a tutoring course. Trying to replicate the instructions on my own I directed output of the ls listing command (lists all files of my home directory ) to My_dir.tsv file (see the screenshot) to make use of... (9 Replies)
Discussion started by: scrutinizerix
9 Replies

3. Shell Programming and Scripting

Using :<<cut / cut to comment out block of bash script

I am using : << cut / cut to comment out block of code. Works fine on few lines of script, then it gives me this cryptic error when I try to comment out about 80 lines. The "warning " is at last line of script. done < results 169 echo "END read all positioning parameters" 170... (8 Replies)
Discussion started by: annacreek
8 Replies
POWERCOM(8)							    NUT Manual							       POWERCOM(8)

NAME
powercom - UPS driver for Powercom/Trust/Advice UPS equipment NOTE
This man page only documents the hardware-specific features of the powercom driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
This driver supports many similar kinds of UPS hardware. The most common ones are the Trust 425/625, Powercom, and Advice Partner/King PR750. Others using the same protocol may also work. EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5) file: linevoltage=value An integer specifying the line voltage. It can't be auto detected. Acceptable values are in the range of 110-120 or 220-240. The default is 230. manufacturer=name Specify the manufacturer name, which also can't be auto detected. This is a user defined string, so any name is acceptable. The default is PowerCom. modelname=name Specify the model name, which also can't be auto detected. This is a user defined string, so any name is acceptable. The default is Unknown. serialnumber=value Like modelname above, but for the serial number. The default is Unknown. type=name The exact type of the communication protocol within the powercom family, that will be used to communicate with the UPS. The type is named after the first modelname that was coded with that protocol. The acceptable names are Trust, Egys, KP625AP, IMP, KIN, BNT, and BNT-other. The default is Trust. BNT-other is a special type for other BNT models (such as the 1500A at 120V and can be used to override ALL models using ALL of the following values. shutdownArguments={{minutes,seconds},whether_minutes_should_be_used} The minutes and seconds that the UPS should wait between receiving the shutdown command and actually shutting off. The other argument should be set to the character n only when the minutes value should be skipped and not sent to the UPS. The default is type-dependent and is given below. The braces and commas are mandatory. Note that there should be no whitespace characters. numOfBytesFromUPS=value The number of bytes in a UPS frame: 16 is common, 11 for Trust. The default is type-dependent and is given below. methodOfFlowControl=name The method of serial communication flow control that is engaged by the UPS. The default is type-dependent and is given below. Acceptable names are dtr0rts1, dtr1 or no_flow_control. validationSequence={{index1,value1},{index2,value2},{index3,value3}} (Only for types KP625AP, Trust, Egys.) 3 pairs to be used for validating the UPS by comparing bytes of the raw data with constant values. The index selects the byte from the UPS (see numOfBytesFromUPS) and the value is for matching to the byte. The default is type-dependent and is given below. The braces and commas are mandatory, as the lack of white space characters. frequency={A,B} (Only for types KP625AP, Trust, Egys.) A pair to convert the raw frequency data to a human-readable frequency reading using the function 1/(A*x+B). If the raw value x IS the frequency, then set A=1/(x^2) and B=0. The default is type-dependent and is given below. Do note that the braces and commas are mandatory as well, as the lack of whitespace characters. loadPercentage={BatteryA,BatteryB,LineA,LineB} (Only for types KP625AP, Trust, Egys.) A quad to convert the raw load data to human readable load percentage reading using the function A*x+B. If the raw value x IS the Load Percent, then set A=1 and B=0. The default is type-dependent and is given below. Do note that the braces and commas are mandatory, as the lack of white space characters. batteryPercentage={Battery1,Battery2,Battery3,Line4,Line5} (Only for KP625AP, Trust, Egys.) A 5 tuple to convert the raw battery and line data to a human-readable battery and line percentage reading using the functions (Battery) A*x+B*y+C and (Line) D*x+E. If the raw value x IS the Battery Percent, then set A=1, B=0, C=0, D=1, E=0. The default is type-dependent and is given below. Do note that the braces and commas are mandatory, as the lack of white space characters. voltage={240A,240B,120A,120B} (Only for types KP625AP, Trust, Egys.) A quad that is used convert the raw voltage data to a human-readable voltage reading using the function A*x+B. If the raw value x IS HALF the Voltage, then set A=2, B=0. The default is type-dependent and is given below. Do note that the braces and commas are mandatory, as well as the lack of whitespace characters. DEFAULT VALUES FOR THE EXTRA ARGUMENTS
linevoltage = 230 manufacturer = PowerCom modelname = Unknown serialnumber = Unknown type = Trust The rest of the default values for the extra arguments are type-dependent. However, BNT-other is a special type that can be used to override ALL values for ALL models. Trust numOfBytesFromUPS = 11 methodOfFlowControl = dtr0rts1 validationSequence = {{5,0},{7,0},{8,0}} shutdownArguments = {{0,10},n} frequency = {0.00020997,0.00020928} loadPercentage = {6.1343,-0.3808,4.3110,0.1811} batteryPercentage = {5.0000,0.3268,-825.00,4.5639,-835.82} voltage = {1.9216,-0.0977,0.9545,0.0000} KP625AP numOfBytesFromUPS = 16 methodOfFlowControl = dtr0rts1 validationSequence = {{5,0x80},{7,0},{8,0}} shutdownArguments = {{0,10},n} frequency = {0.00020997,0.00020928} loadPercentage = {6.1343,-0.3808,4.3110,0.1811} batteryPercentage = {5.0000,0.3268,-825.00,4.5639,-835.82} voltage = {1.9216,-0.0977,0.9545,0.0000} Egys numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{5,0x80},{7,0},{8,0}} shutdownArguments = {{0,10},n} frequency = {0.00020997,0.00020928} loadPercentage = {6.1343,-0.3808,1.3333,0.6667} batteryPercentage = {5.0000,0.3268,-825.00,2.2105,-355.37} voltage = {1.9216,-0.0977,0.9545,0.0000} IMP numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{5,0xFF},{7,0},{8,0}} shutdownArguments = {{1,30},y} KIN numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{11,0x4b},{8,0},{8,0}} shutdownArguments = {{1,30},y} BNT numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{11,0x42},{8,0},{8,0}} shutdownArguments = {{1,30},y} BNT-other numOfBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{8,0},{8,0},{8,0}} shutdownArguments = {{1,30},y} frequency = {0.00027778,0.0000} loadPercentage = {1.0000,0.0,1.0000,0.0} batteryPercentage = {1.0000,0.0000,0.0000,1.0000,0.0000} voltage = {2.0000,0.0000,2.0000,0.0000} AUTHOR
Peter Bieringer <pb@bieringer.de>, Alexey Sidorov <alexsid@altlinux.org>, Keven L. Ates <atescomp@gmail.com> SEE ALSO
The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 05/21/2012 POWERCOM(8)

Featured Tech Videos

All times are GMT -4. The time now is 07:25 PM.
Unix & Linux Forums Content Copyright 1993-2021. All Rights Reserved.
Privacy Policy