Login incorrect; please try again error message displayed endlessly in a loop
Hi,
I use SunBlade 150 machine hosting Solaris 10 OS. Whenever I switch on the machine, I get "Login incorrect; please try again." error message endlessly in a loop even though the "OK" button is pressed. There is no prompt for relogin but the same message keeps poping up.
The other ways we are trying to address this is by getting to “OK” prompt. But, we are unable to get even the “OK” prompt.
The following various options were tried to get the “OK” prompt, But :-(.
Since it is a Sunblade machine, the removal of keyboard does not take to “OK” prompt, where as Sun Enterprise does take the user to “OK” prompt when keyboard is disconnected.
Put Solaris OS CD and restarted the machine.
Keyed in various key combinations during system boot: Stop A, Stop N, Ctrl+Break, Ctrl+D, #~, #., ~. etc...
Tried connecting thru Hyper terminal using the Console cable. But, the Sunblade machine do not have the port for connecting the same.
Please let know how the above issues can be resolved.
I have rebooted my box (Redhat Linux) and the system is back online now, but Iam unable to login via ssh for all the users including root, it says "Login Incorrect". I am pretty sure the username/password is correct.May be the password or the shadow file is corrupted ???
How do i login to the... (6 Replies)
Hi to all,
I get a problem when i tried to modifie the password of the root,but thi s the message i have on root password,even i put the old password i have the same message "password has expired, you are allowed to entry by daemon"Could any one give me any suggestion to solve the problem?... (2 Replies)
Hello,
I have an issue with a NIS client station on my network. I can't log onto with any NIS login and it prompt "Login incorrectl please try again". My others stations work correctly and log on without problem.
This station worked correctly before yesterday, but yesterday we've got a power... (5 Replies)
I want to change login failure message, "login incorrect"
deny user login for user id tom
sudo passwd -l tom
type username and type password on login prompt
and then it will display login failure message "login incorrect"
console
############
login: tom
password:
login incorrect... (2 Replies)
Well I use OpenSolaris about 6 months until all traquilo ai ...
OpenSolaris is a partitioned HD but only have OpenSolaris. the other partition is empty.
Oh for some reason the personal I would WINDOWS installing xp then did the normal installation of windows and made a NTFS partition on that HD... (2 Replies)
When I did a ps-ef on a host I noticed that the /usr/openwin/bin/fbconole process was started from the /etc/init PID, and was owned by the operator. What could have caused this issue? (0 Replies)
Hey everyone,
I am trying to get a 2GB patch cluster FTP'd to a solaris 10 server. I have tried logging in via ftp, and both with root as well as my personal account, I get "Login Incorrect." I have verified that I can log in using telnet.
-bash-3.00$ netstat -a |grep ftp
*.ftp ... (10 Replies)
Hi,
i am trying to do a RCP from a reality environment machine to a unix directory and coming up with the error
remshd: Login incorrect.
Any ideas?
Thanks (2 Replies)
We have tried to perform the data collection of 11 SUN FIRE X4170 SERVER as part of preventive maintenance activity. But, when we tried to access the ILOM using sunservice user we got a “login incorrect” prompt.
We used the “changeme” password.
can we use the root/changeme account instead... (4 Replies)
Hi
I upgraded my Suse linux server and installed a complete new server with suse ver 11. I copied the passwd and shadow files from the old Suse 10 to the new Suse 11 server (/etc)
Now I get "530 Login incorrect" error when I try to FTP into an account with correct username and password.
Can... (1 Reply)
Discussion started by: Tony.Marshall
1 Replies
LEARN ABOUT DEBIAN
fence_bladecenter
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)NAME
fence_bladecenter - Fence agent for IBM BladeCenter
DESCRIPTION
fence_bladecenter is an I/O Fencing agent which can be used with IBM Bladecenters with recent enough firmware that includes telnet support.
It logs into a Brocade chasis via telnet or ssh and uses the command line interface to power on and off blades.
fence_bladecenter accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_bladecenter can be run by itself with command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.ibm.com
PARAMETERS -o, --action=<action>
Fencing Action (Default Value: reboot)
-a, --ip=<ip>
IP Address or Hostname This parameter is always required.
-l, --username=<name>
Login Name This parameter is always required.
-p, --password=<password>
Login password or passphrase
-S, --password-script=<script>
Script to retrieve password
-c, --command-prompt=<prompt>
Force command prompt (Default Value: system>)
-x, --ssh
SSH connection
-n, --plug=<id>
Physical plug number or name of virtual machine This parameter is always required.
-k, --identity-file=<filename>
Identity file for ssh
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-u, --ipport=<port>
TCP port to use for connection with device
-v, --verbose
Verbose mode
-D, --debug-file=<debugfile>
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=<char>
Separator for CSV created by operation list (Default Value: ,)
--power-timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait
Wait X seconds after issuing ON/OFF (Default Value: 10)
--missing-as-off
Missing port returns OFF instead of failure
--delay
Wait X seconds before fencing is started (Default Value: 0)
--retry-on
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).
metadata
The operational behavior of this is not known.
STDIN PARAMETERS
action Fencing Action (Default Value: reboot)
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
passwd_script
Script to retrieve password
cmd_prompt
Force command prompt (Default Value: system>)
secure SSH connection
port Physical plug number or name of virtual machine This parameter is always required.
identity_file
Identity file for ssh
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipport TCP port to use for connection with device
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 10)
missing_as_off
Missing port returns OFF instead of failure
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_bladecenter (Fence Agent) 2009-10-20 FENCE_AGENT(8)