Sun Fire 280R Sun Solaris CRT/Monitor requirements Post: 302304758

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Sun Fire 280R

Hello all, I'm lost and can't figure this problem out. I have a Sun fire 280R running Solaris 8. Everything was working great. I have one drive in bay 1(not 0). But when I reboot the system it trys to open files in /dev/rdsk/c1t1d0s0. Should it have been opeing /dev/rdsk/c1t0d0s0, the...

2. Solaris

Weird behavior on a Sun Fire V120 running solaris 10.

All, After a power loss I went to power on our sun fire v120 that is running solaris 10 and now it will not boot. I tried power cycling it from the lom and pulling the cord but nothing works. All it does is after a power cycle it will start to boot and then start to spit out a bunch of hex...

3. Solaris

Solaris 9 to Solaris 10 upgrade on Sun Fire 3800

Hello there! I have Sun Fire 3800 with very old Solaris 9 and I need to perform upgrade to concurrent Solaris 10 version, preserving current OS configuration. I supose to make it using Live Upgrade, but according to Solaris Live Upgrade Software: Minimum Patch Requirements page, I need to...

4. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,...

5. Emergency UNIX and Linux Support

[Solved] DCMU (disk control and monitor utility) sun fire

Hi , during 2 weeks i�ve been trying to find them. i need DCMU packets for managing internal disks on sun fire x4500 and sun fire x4600 on rhel. i have opened to tickets to myoraclesupport but no answer. please anybody could tell me a link or anythiing?? i�ve been searching and searching...

6. Solaris

Couldn't upgrade Solaris 10 x86 from Sun Fire x2200 to Dell Precision Wrkst

:)Dear Solaris Experts, I need to clone a Solaris 10 x86 system using a ufsdump backup from the following source & target servers: Sun Fire x2200 M2 with Quad Core Processor # /usr/platform/`uname -i`/sbin/prtdiag System Configuration: Sun Microsystems Sun Fire X2200 M2 with Quad Core...

7. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an...

8. Solaris

Sun-Fire-V490 Printer Issue After Upgrade of Solaris

Hey Guys I am new here, dont know if any one can assist me with this issue. I have a Sun-Fire-V490 machine that was upgraded to version 9 and patched a few months back. Problem is a few network printers managed by the server is printing an extra page that comes out before and after every print...

9. Solaris

Help with Solaris 8 10/00 Installation on Sun Fire V490 Server

cat note Hi Sun Solaris Experts, When I try to install Solaris 8 10/00 OS via the Solaris 8 Installation Disk on our Sun Fire V490 Server using the command , I get: boot: cannot open kernel/sparcv9/unix which means it can't find the unix kernel file on the installation disk . By the way, I...

10. Solaris

Solaris 10 1/13 & Sun Fire V490 Server

Hi Solaris/Unix Experts, I've installed Oracle Solaris 10 1/13 on a Sun Fire V490 Server via its external Serial Port using a Cisco Console Cable connected to my Laptop PC running SecureCRT terminal emulation software emulating VT100 Terminal. The Sun Fire V490 server has two on-board...

LEARN ABOUT DEBIAN

bt-serial

bt-serial(1)							    bluez-tools 						      bt-serial(1)

NAME

       bt-serial - a bluetooth serial manager

SYNOPSIS

       bt-serial [OPTION...]

       Help Options:
	 -h, --help

       Application Options:
	 -a, --adapter=<name|mac>
	 -c, --connect <name|mac> <pattern>
	 -d, --disconnect <name|mac> <tty_device>

DESCRIPTION

       This utility is used to manage serial service connections.

OPTIONS

       -h, --help
	   Show help

       -a, --adapter <name|mac>
	   Specify adapter to use by his Name or MAC address
	   (if this option does not defined - default adapter used)

       -c, --connect <name|mac> <pattern>
	   Connects to a specific RFCOMM based service on a
	   remote device and then creates a RFCOMM TTY
	   device for it; `pattern` is a profile short name (spp, dun),
	   RFCOMM channel (1-30)

       -d, --disconnect <name|mac> <tty_device>
	   Disconnect a RFCOMM TTY device that has been created

AUTHOR

       Alexander Orlenko <zxteam@gmail.com>.

SEE ALSO

       bt-adapter(1) bt-agent(1) bt-audio(1) bt-device(1) bt-input(1) bt-monitor(1) bt-network(1)

								    2010-08-12							      bt-serial(1)