I have a system with HP-UX 11.23 installed on it. There are ~36GB of unused space on the HDD. I did a very basic installation, and it created the usual volume group /dev/vg00. When I look at the output of ioscan -funC disk, I see this (and more, but irrelevant to this post):
How do I "see" the unused hard drive space? I am looking at the size of the "slices" and here is what I am seeing:
Normally on a Linux system I could do something like "fdisk -l /dev/sda" to see the partition table for /dev/sda, or I could do "fdisk /dev/sda" to view and/or edit the partition table for that device.
hello All!
I have sun ultra5 pc with 9GB HDD and I'm planning to add 20GB HHD for future expansion and it is coming from my old intel based pc. My problem is everytime I formatted the new HD the system only gives me the result of free space for about 2GB+ as a maximum space.
I have... (1 Reply)
One of my Solaris 8 machines hd was about to die. So I used g4u to create an image of the 9gb drive and I put it in a 36gb drive. That solved my dieing hd problem.
But....
How do I get my machine to see the unused 27gb of space?
Any help would be greatly appreciated. (1 Reply)
Hi,
I need to add a condition in a script. The script is executed only if there is free 8 Gigas space.
I know
if then
fi
I don't know how to write the condition on free space
Thanks
:) (1 Reply)
Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D
I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4.
The current HDD is an IBM DGHS COMP IEC -950
FRU PN#... (5 Replies)
Friends ,
Using which command I can see the free space or usage of the Total HDD in Linux RHEL ?
suppose Imy HDD is 10GB space . I have to insall RHEL 5 using 6 GB space . Now i have 4 GB space free in my total HDD . Now using which cammand I see this 4 GB free space ?
Wating for kind... (7 Replies)
i Have alloted 20G in my vmware for solaris 10, upon installation, and some distribution of disk space to /,/opt,swap i just use 19G.
Can i still use the 1G? How? how to see the 1G? that i did not use? how can i use it?
appreciate your responce (17 Replies)
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Discussion started by: wisecracker
17 Replies
LEARN ABOUT BSD
lvremove
LVREMOVE(8) System Manager's Manual LVREMOVE(8)NAME
lvremove - remove a logical volume
SYNOPSIS
lvremove [-A|--autobackup {y|n}] [-d|--debug] [-h|--help] [-t|--test] [-v|--verbose] [--version] [-f|--force] [--noudevsync] LogicalVol-
ume{Name|Path} [LogicalVolume{Name|Path}...]
DESCRIPTION
lvremove removes one or more logical volumes. Confirmation will be requested before deactivating any active logical volume prior to
removal. Logical volumes cannot be deactivated or removed while they are open (e.g. if they contain a mounted filesystem). Removing an
origin logical volume will also remove all dependent snapshots.
If the logical volume is clustered then it must be deactivated on all nodes in the cluster before it can be removed. A single lvchange com-
mand issued from one node can do this.
OPTIONS
See lvm(8) for common options.
-f, --force
Remove active logical volumes without confirmation.
--noudevsync
Disable udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible
udev processing in the background. You should only use this if udev is not running or has rules that ignore the devices LVM2 cre-
ates.
EXAMPLES
Remove the active logical volume lvol1 in volume group vg00 without asking for confirmation:
lvremove -f vg00/lvol1
Remove all logical volumes in volume group vg00:
lvremove vg00
SEE ALSOlvcreate(8), lvdisplay(8), lvchange(8), lvm(8), lvs(8), lvscan(8), vgremove(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) LVREMOVE(8)