How to configure DHCP to Static IP Post: 302280462

10 More Discussions You Might Find Interesting

1. HP-UX

HP-UX 10.xx Changing from static IP to DHCP

***Newbie alert*** What's the easiest way to accomplish this? An admin left our company and I have taken over his HP Workstation and moved it to a different location that is on a different IP segment. I have performed a number of google searches but the steps I have followed haven't worked. ...

2. IP Networking

dhcp and static ip conflicts.

I have a USB Wireless Adapter using the rum0 driver. All I want to do is set a perminent static IP for the onboard wired interface elxl0. I can plumb the wired interface up fine on the fly, but when I try to save the static IP over a reboot, I lose the IP address assigned to rum0 from my wireless...

3. IP Networking

Switching from DHCP to Static IP

I am trying to write a set of scripts for my Ubuntu 810 Server to allow a user to change from DHCP to a user-supplied Static IP, Subnet, Gateway and DNS Servers. So far I have the following, where $USERCHOICE is a user-entered value in each case: ifconfig eth0 down && ifconfig eth0 $USERCHOICE...

4. Solaris

How to Configure a Static Ip Address

Hello friend, I am new in UNIX, but I want to learn a lot Well I have a problem to try to configure my PC with a static IP Address (IP 192.168.1.39, Mask 255.255.255.0, gateway 192.168.1.1) (DNS 200.48.225.130 and 200.48.225.146). where are the file that I must be change? The SO is Sun Solaris...

5. Red Hat

How to know whether my system is using DHCP or STATIC IP

Hi, I am using RHEL 5.1 and i would like to know, how to find the whether my system is using DHCP or STATIC IP with out looking at /etc/sysconfig/network-scripts/ifconfig-eth0 configuration file. Regards, Venkat

6. UNIX for Dummies Questions & Answers

How to tell if i am using DHCP or Static

Hey guys , YEs this is probably silly for most but i am new to this forum and solaris . i am curious to know if the ip address we have for our solaris server is static or dhcp . how can i tell ? will ifconfig -a tell me this ? or other commands? Thanks in advance

7. Red Hat

Purpose of Static IP address through DHCP

Hi All, Could you please explain the purpose of assigning the static IP by using the DHCP Concept. Like by using the clients MAC address we assign the static IP Address. Waiting for your reply. Thanks in Advance.

8. HP-UX

[Solved] Static or DHCP IP in HP-UX

Hi, I can find the IP details whether it is Static or dynamic in Linux machine from the location /etc/sysconfig/network-scripts/ifconfig-eth0 configuration file. Can someone suggest a location to find the same in HP UX machines? -Vivek

9. IP Networking

Node switched itself from static to DHCP on reboot issue

I'm trying to figure out what circumstances would cause an Open Solaris 11.2 host to switch itself from a static to a DHCP ip address upon reboot. This has only happened once but is a cause for some concern as this machine will be part of a web server pool. Nothing has changed on the LAN that...

10. Solaris

Solaris static IP changed (non DHCP)

We have 2 solaris 10 t5240 servers with static IP addresses on nxge0 I/F which were rebooted a few days back with a known good config that has been in place for years (for /etc/hosts, /etc/hostname.nxge0, /etc/netmasks, etc) They are not using dhcp. About the same time today, both of their...

LEARN ABOUT SUSE

dh_auto_configure

DH_AUTO_CONFIGURE(1)						     Debhelper						      DH_AUTO_CONFIGURE(1)

NAME

       dh_auto_configure - automatically configure a package prior to building

SYNOPSIS

       dh_auto_configure [buildsystemoptions] [debhelperoptions] [--params]

DESCRIPTION

       dh_auto_configure is a debhelper program that tries to automatically configure a package prior to building. It does so by running the
       appropriate command for the build system it detects the package uses.  For example, it looks for and runs a ./configure script,
       Makefile.PL, Build.PL, or cmake. A standard set of parameters is determined and passed to the program that is run. Some build systems, such
       as make, do not need a configure step; for these dh_auto_configure will exit without doing anything.

       This is intended to work for about 90% of packages. If it doesn't work, you're encouraged to skip using dh_auto_configure at all, and just
       run ./configure or its equivalent manually.

OPTIONS

       See "BUILD SYSTEM OPTIONS" in debhelper(7) for a list of common build system selection and control options.

       -- params
	   Pass params to the program that is run, after the parameters that dh_auto_configure usually passes. For example:

	     dh_auto_configure -- --with-foo --enable-bar

SEE ALSO

       debhelper(7)

       This program is a part of debhelper.

AUTHOR

       Joey Hess <joeyh@debian.org>

11.1.6ubuntu2							    2018-05-10						      DH_AUTO_CONFIGURE(1)

10 More Discussions You Might Find Interesting

1. HP-UX

HP-UX 10.xx Changing from static IP to DHCP

Discussion started by: Steelysteel

2. IP Networking

dhcp and static ip conflicts.

Discussion started by: ts97783

3. IP Networking

Switching from DHCP to Static IP

Discussion started by: cleanden

4. Solaris

How to Configure a Static Ip Address

Discussion started by: andresguillen