07-23-2008
Don't ya hate to reply to your own posts?
We're replacing the riser to a variety that provides PCI-X slots.
FWIW - It would appear that Unixware 7.x drivers are cross-compatible with Openserver 6.
--Steve
9 More Discussions You Might Find Interesting
1. Solaris
Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
Discussion started by: kduffin
5 Replies
2. AIX
I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
Discussion started by: kwliew999
11 Replies
3. SCO
Running into an interesting problem here:
I can add the tape with "mkdev tape" the system appears to see it wwith "hwconfig -hc" however a 'tape status /dev/rStp0' says 'no device found',
checked the configuration files in 'etc' all appear to be correct.
Any suggestion appreciated
Jim (3 Replies)
Discussion started by: jimj1369
3 Replies
4. SCO
How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one) required a maintenance pack to be installed? Is this right and how do I check to see if these work? (2 Replies)
Discussion started by: uxlunatick
2 Replies
5. Solaris
why is this error message keeps coming once every month. Is this a serious problem?
In the /var/adm/messages file
Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report:
Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Discussion started by: incredible
7 Replies
6. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
7. SCO
PCI-X was popular years ago, now it's not. Today's motherboards have PCIe slots, not PCI-X slots. I'm accustomed to using Adaptec, but I believe they've been bought out by ATTO Technology. Now ATTO has a product called PCI UL50 Dual Channel VHDCI Ultra320 SCSI PCIe card. So: does the SCO UNIX... (7 Replies)
Discussion started by: Transpower
7 Replies
8. Linux
Hi,
I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages.
fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
Discussion started by: shubha_1
0 Replies
9. HP-UX
I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC.
At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
LEARN ABOUT CENTOS
tran_bus_reset
tran_bus_reset(9e) Driver Entry Points tran_bus_reset(9e)
NAME
tran_bus_reset - reset a SCSI bus
SYNOPSIS
#include <sys/scsi/scsi.h> int prefix
tran_bus_reset(dev_info_t *hba_dip, int level);
INTERFACE LEVEL
Solaris DDI
PARAMETERS
hba_dip The dev_info_t pointer associated with the SCSI HBA.
level The level of reset required.
DESCRIPTION
The tran_bus_reset() vector in the scsi_hba_tran(9S) structure should be initialized during the HBA driver's attach(9E). It is an HBA
entry point to be called when a user initiates a bus reset through device control interfaces.
tran_bus_reset() must reset the SCSI bus without resetting targets.
level will be one of the following:
RESET_BUS Reset the SCSI bus only, not the targets.
Implementation is hardware specific. If it is not possible to reset the SCSI bus without changing the state and operating mode of the tar-
gets, the HBA driver should not initialize this vector or return failure.
RETURN VALUES
tran_bus_reset() should return:
1 on success.
0 on failure.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|Stability Level |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO
attributes(5), tran_quiesce(9E), scsi_hba_tran(9S)
SunOS 5.10 17 Mar 1999 tran_bus_reset(9e)