[HELP] mirroring disk at solaris 8 sparc v890 Post: 302091084

10 More Discussions You Might Find Interesting

1. Solaris

Solaris mirroring / non-root disk

Hi Guys, Need to add 2 disks into a JBOD array (3310). Does anyone see anything wrong with my Procedure / Doco below? 1> Logon to system, check system logs for abnormal entries. 2> Make backups of related system files: A>cp -p /etc/system /etc/system.backup.081505 B>cp -p /etc/vfstab...

2. UNIX for Advanced & Expert Users

Solaris 8 disk/mirroring issue

Hello! I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of...

3. Solaris

[help]network error after reboot server v890 sparc

hi expert, i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below : Setting default IPv4 interface for multicast: add net 224.0/4: gateway...

4. Solaris

[need help] error after configure network card at v890 sparc

hi experts, i have some problem with my server v890, i had config the network with ce0,ce1 and eri0 but after reboot the server have this error messages display : WARNING: ce0: fault detected external to device; service degraded WARNING: ce0: xcvr addr:0x01 - link down configuring IPv4...

5. Solaris

Disk Mirroring for Solaris 10 x86

I am having an issue with setting up disk mirroring for Solaris 10 on an x86 server. My main problem is that the volumes and slices have already been setup and our proprietary software has already been installed and configured. The entire drive has been allocated in this configuration and the...

6. Solaris

Solaris 10 Disk Mirroring

Has anyone managed to set up disk mirroring in Solaris 10 yet? If so can you point me in the direction of some useful documentation please. Cheers

7. Solaris

Disk Mirroring on solaris 5.8

Hi Friends, I am having Sun Solaris 5.8 OS installed having 2 different size hard disk, sizes are c0t0d0s0(160 GB) and c0t2d0s0 (40GB). I have installed Sun Solaris 5.8 OS in c0t0d0s0 (160GB) harddisk. I have configured all the parameters required for disk mirroring. But when executing...

8. Solaris

Moving disk partition from Solaris sparc to x86

Hello Gurus, Im trying to migrate some SAN disks from sparc server to X86 one, and having issues with disks not getting mounted on the X86 server with " not this fstyp error" due to the different partitions lay out between the two OS. I have tried it from sparc to sparc server and it worked,...

9. Solaris

root disk mirroring in solaris volume manager for solaris 10

Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment. Let me know if you need any deatils on this. Thanks, Rama

10. Solaris

Root disk mirroring in Solaris 10

I would like to perform root disk mirroring task. Can someone please help me out on this. Thanks !! Regards, Rama

LEARN ABOUT PLAN9

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)