10-17-2002
Raid and multibooting
Hi all,
I'm about to reconfigure my system with Raid Level 0. I haven't been able to find out much about Raid and Linux through searching. I'll be multi-booting with Win 2K, XP, Mandrake 9 and Red Hat 8. I have 3 drives (2 X 60GB and 1 X 80GB) and want to use Raid 0 to configure the drives into 4 partitions of a little under 50GB each. Will Mandrake and Red Hat accept this Raid configuration ok, or should I config differently: leave 2K & XP on drives of their own and partition the 80 for the Linuxs, for example? Any recomendations would be appreciated greatly.
Regards
9 More Discussions You Might Find Interesting
1. Solaris
hai everybody n good morning........here r some queries.......
1. what is the interlace value in RAID 0 (striping.......)
2. How many no of metadevices are required for mirroring and why......... (1 Reply)
Discussion started by: sudhansu
1 Replies
2. Solaris
hi all...sudhansu here............ i need some help..........
what is RAID 0+1 and RAID 1+0.............what is the difference between them................
suppose i have 80 gb disk space,then which RAID level i follow n why......... i need redundancy n maximum storage..........please help (3 Replies)
Discussion started by: sudhansu
3 Replies
3. Solaris
Somebody can help me ! how can i do mirror in sun ver 8
without third party software !!! (3 Replies)
Discussion started by: goldfelda
3 Replies
4. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
5. Solaris
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Discussion started by: jegaraman
2 Replies
6. Solaris
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Discussion started by: Solarister
1 Replies
7. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
8. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
9. Red Hat
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT REDHAT
rhn_check
RHN_CHECK(8) Red Hat Network RHN_CHECK(8)
NAME
rhn_check - check for queued actions on RHN and execute them
SYNOPSIS
/usr/sbin/rhn_check [-v] [--verbose]
DESCRIPTION
rhn_check is a client program that connects to the Red Hat Network backend servers and retrieves information associated with the queued
actions for this particular system. This script reads the digital server ID from /etc/sysconfig/rhn/systemid and uses that to identify the
machine to the Red Hat Network. Upon successfull authentication, rhn_check will start processing the queued actions sequentially.
ACTION TYPES
The following types of actions are currently processed by rhn_check:
action type description
() ()
refresh This action will refresh the hardware or software profiles of this
machine with Red Hat Network. This fucntion is called as
refresh(hardware) or refresh(rpmlist)
new_systemid This action is used by the RHn Backend to update the Digital
system ID of this machine with a new one.
update_packages This action will trigger rhn_check into running a package
update for a list of packages queued from the Red Hat Network.
rhn_check will use modules from the up2date client to download
the packages, solve dependencies and install the on the system.
FILES
/etc/sysconfig/rhn/systemid The digital server ID for this machine if the system has been registered onto Red Hat Network. This file does
not exist otherwise.
/var/spool/up2date This directory is used by up2date to store package headers and RPM packages downloaded from Red Hat Network
SEE ALSO
man pages for up2date(8) and rhnsd(8).
AUTHORS
Cristian Gafton <gafton@redhat.com>
Preston Brown <pbrown@redhat.com>
()