Tape Drive on Unix 7.1.1 Post: 28004

8 More Discussions You Might Find Interesting

1. Cybersecurity

Unix backup to tape drive

does anyone know how I can make an automatic backup of files to a tape drive under UNIX. I have so many commands, I don't know which goes where. I have commands for the task scheduler, Cron and other unix commands. Please help. Very Urgent. Thanks

2. UNIX for Advanced & Expert Users

linux/unix tape drive & AMANDA

Trying to set up AMANDA on my linux machine, with the DDS-3 HP Tape drive. Am having problems, in my amanda.conf it doesn't like /dev/st0 or /dev/st0nr and I need to have it as non rewinding, is there another command/params i can give it for the tape drive to be non rewinding? I'm trying to use...

3. Filesystems, Disks and Memory

DDS2 Tape Drive onto Linux/Unix

Knoppix, latest distribution is what I am using. I have a DDS2 tape drive. Recognised in Windows, etc. Cannot see it in UX/Lux. How do I mount it? How do I copy the data from the tape to another partition? What I need to do is transfer the contents of the DDS2 tape onto DVD. Simple. ...

4. AIX

Tape Drive

I have tape drive in one Lpar. when i saw that time tape is in defined state. After that i deleted the tape drive using the rmdev -R command. Then fired the cfgmgr -v command. But I am not getting the tape drive. Now the drive is even not in defined state also. It is not shown the tape drive. How...

5. UNIX for Dummies Questions & Answers

installing unix tape drive

Hi, i installed a unix tape drive on my alphaserver. when i use a mt command it tells me there is no tape or device. I have used the hardware manager and it shows the tape is present. Can anyone help me understand why it cannot pick up the tape as a default?

6. HP-UX

HP-Unix 64 bit Tape Drive creating problem

Hello All, I have HP Openview storage data protector version 5.5. When I am going to write my backup I have an error message saying "Connot Open Device /dev/rmt/0mn" Follownig is my output: # ls -l /dev/rmt/0mn crw-rw-rw- 2 bin bin 205 0x080140 Jan 17 16:41 /dev/rmt/0mn # uname -a...

7. Solaris

Help with tape drive

Hey folks, Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes. I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V. As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly. ...

8. HP-UX

TAPE drive

I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help? Thanks in advance

LEARN ABOUT CENTOS

mkfs.bfs

MKFS.BFS(8)                                                    System Administration                                                   MKFS.BFS(8)

NAME

       mkfs.bfs - make an SCO bfs filesystem

SYNOPSIS

       mkfs.bfs [options] device [block-count]

DESCRIPTION

       mkfs.bfs creates an SCO bfs filesystem on a block device (usually a disk partition or a file accessed via the loop device).

       The block-count parameter is the desired size of the filesystem, in blocks.  If nothing is specified, the entire partition will be used.

OPTIONS

       -N, --inodes number
              Specify  the  desired  number  of  inodes (at most 512).  If nothing is specified, some default number in the range 48-512 is picked
              depending on the size of the partition.

       -V, --vname label
              Specify the volume label.  I have no idea if/where this is used.

       -F, --fname name
              Specify the filesystem name.  I have no idea if/where this is used.

       -v, --verbose
              Explain what is being done.

       -c     This option is silently ignored.

       -l     This option is silently ignored.

       -h, --help
              Display help text and exit.

       -V, --version
              Display version information and exit.  Option -V only works as --version when it is the only option.

EXIT CODES

       The exit code returned by mkfs.bfs is 0 when all went well, and 1 when something went wrong.

SEE ALSO

       mkfs(8)

AVAILABILITY

       The mkfs.bfs command is part of the util-linux package and is available from https://www.kernel.org/pub/linux/utils/util-linux/.

util-linux                                                           July 2011                                                         MKFS.BFS(8)