how internal modem on pc Post: 1529

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Modem problem: "Sorry, modem is busy"

Hi! I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"... Specs: Laptop 56K modem Slackware 8.0 Kernel 2.4.5 Cheers;)

2. UNIX for Dummies Questions & Answers

Modem - Test /dev/modem

Ok. I tried following the directions from some of the other threads, but I've hit a road block. I have red hat 7.3 and I installed the hcf package: hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm It installed ok, no errors, but I still can't get linux to find my modem. I've tried...

3. SCO

detecting internal modem

hi, i have recently migrated to SCO UNIX ver 5.0.5. however, i am unable to configure an internet connection as i am using an internal modem(Conexant K56 Soft modem). would someone be willing to help me? thnks :confused:

4. Linux

Problems with the Internal modem

Hi I have a hsf Conexant modem & I have a driver for it but it works only on 2.4.* kernels . I know that there is a site called Linuxant.com which offers kernels for download ,but it gives a speed near 14 kb/s and the full feature driver offered for money and I can't buy it. My questions...

5. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks

6. UNIX for Dummies Questions & Answers

hdisk0 internal

goodpeople, have a corrupt boot volume and systems keep's on crashing with it. suspecting drive is bad. question is how does one determine which of the 5 internal drives I have in my cage is hdisk0 any help would be appreciated Thnx

7. UNIX for Advanced & Expert Users

Forwarding internal internet packets to internal webserver using iptables

Hi, I need to redirect internal internet requests to a auth client site siting on the gateway. Currently users that are authenticated to access the internet have there mac address listed in the FORWARD chain. All other users need to be redirected to a internal site for authentication. Can...

8. Shell Programming and Scripting

Internal variable

i have a file named (Loop) that contains numbers separated by pipelines e.g. : 521|55 545|564 . . . and another file named (search) that contains numbers e.g.: 99999777|332|332 31215648|458|764 when i run this Script: nawk 'BEGIN{FS="|"} NR==FNR{a= $1"|"$2"|";next} a{print...

9. Solaris

How to check for internal modem?

Dear All Can you please let me know how can I check for internal modem on my solaris8 machine? Thank you

LEARN ABOUT DEBIAN

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)