Sponsored Content
Full Discussion: please help
Top Forums UNIX for Dummies Questions & Answers please help Post 12875 by knarayan on Tuesday 8th of January 2002 11:32:00 AM
Old 01-08-2002
please help

I have newly joined here and there is no Unix/Network Administrator here. SO I need to figure all of this myself. Please help me if you know anything about the following:
Is it that veritas volume manager is only used for disk arrays etc?
This is a part from the output of df -k on my Sun box

/dev/vx/dsk/rootvol /
/dev/vx/dsk/usr /usr
/proc /proc
fd /dev/fd
mnttab /etc/mnttab
/dev/vx/dsk/var /var
swap /var/run
swap /tmp
/dev/vx/dsk/opt /opt
/dev/vx/dsk/oracledg/ora01 /ora_install

/dev/vx/dsk/oracledg/ora02 /ora_system

/dev/vx/dsk/oracledg/ora04 /ora_temp

/dev/vx/dsk/oracledg/ora03 /ora_redo

/dev/vx/dsk/oracledg/ora05 /ora_data

/dev/vx/dsk/oracledg/ora06 /ora_indx

/dev/vx/dsk/oracledg/ora07 /ora_lob

/dev/vx/dsk/oracledg/ora08 /ora_rbs

/dev/vx/dsk/oracledg/ora09 /ora_export

/dev/vx/dsk/oracledg/ora10 /ora_arch

How do I find out the filesystems are from the A1000 disk array or local disks.

Thanx a lot for any info.

volfs(7FS)							   File Systems 							volfs(7FS)

volfs - Volume Management file system DESCRIPTION
volfs is the Volume Management file system rooted at root_dir. The default location for root-dir is /vol, but this can be overridden using the -d option of vold (see vold(1M)). This file system is maintained by the Volume Management daemon, vold, and will be considered to be /vol for this description. Media can be accessed in a logical manner (no association with a particular piece of hardware), or a physical manner (associated with a particular piece of hardware). Logical names for media are referred to through /vol/dsk and /vol/rdsk. /vol/dsk provides block access to random access devices. /vol/rdsk provides character access to random access devices. The /vol/rdsk and /vol/dsk directories are mirrors of one another. Any change to one is reflected in the other immediately. The dev_t for a volume will be the same for both the block and character device. The default permissions for /vol are mode=0555, owner=root, group=sys. The default permissions for /vol/dsk and /vol/rdsk are mode=01777, owner=root, group=sys. Physical references to media are obtained through /vol/dev. This hierarchy reflects the structure of the /dev name space. The default per- missions for all directories in the /vol/dev hierarchy are mode=0555, owner=root, group=sys. mkdir(2), rmdir(2), unlink(2) (rm), symlink(2) (ln -s), link(2) (ln), and rename(2) (mv) are supported, subject to normal file and direc- tory permissions. The following system calls are not supported in the /vol filesystem: creat(2), only when creating a file, and mknod(2). If the media does not contain file systems that can be automatically mounted by rmmount(1M), users can gain access to the media through the following /vol locations: +-----------------------------------+------------------------------------+ | Location | State of Media | +-----------------------------------+------------------------------------+ |/vol/dev/diskette0/unnamed_floppy | formatted unnamed floppy-block | | | device access | +-----------------------------------+------------------------------------+ |/vol/dev/rdiskette0/unnamed_floppy | formatted unnamed floppy-raw | | | device access | +-----------------------------------+------------------------------------+ |/vol/dev/diskette0/unlabeled | unlabeled floppy-block device | | | access | +-----------------------------------+------------------------------------+ |/vol/dev/rdiskette0/unlabeled | unlabeled floppy-raw device access | +-----------------------------------+------------------------------------+ |/vol/dev/dsk/c0t6/unnamed_cdrom | CD-ROM-block device access | +-----------------------------------+------------------------------------+ |/vol/dev/rdsk/c0t6/unnamed_cdrom | CD-ROM-raw device access | +-----------------------------------+------------------------------------+ For more information on the location of CD-ROM and floppy media, see System Administration Guide: Basic Administration or rmmount(1M). Partitions Some media support the concept of a partition. If the label identifies partitions on the media, the name of the media becomes a directory with partitions under it. Only valid partitions are represented. Partitions cannot be moved out of a directory. For example, if disk volume 'foo' has three valid partitions, 0, 2, and 5, then: /vol/dsk/foo/s0 /vol/dsk/foo/s2 /vol/dsk/foo/s5 for block access and /vol/rdsk/foo/s0 /vol/rdsk/foo/s2 /vol/rdsk/foo/s5 for character access. If a volume is relabeled to reflect different partitions, the name space changes to reflect the new partition layout. A format program can check to see if there are others with the volume open and not allow the format to occur if it is. Volume Management, however, does not explicitly prevent the rewriting of a label while others have the volume open. If a partition of a volume is open, and the volume is relabeled to remove that partition, it will appear exactly as if the volume were missing. A notify event will be generated and the user may cancel the operation with volcancel(1), if desired. SEE ALSO
volcancel(1), volcheck(1), volmissing(1) rmmount(1M), vold(1M), rmmount.conf(4), vold.conf(4) System Administration Guide: Basic Administration SunOS 5.10 8 Feb 1995 volfs(7FS)

Featured Tech Videos

All times are GMT -4. The time now is 03:00 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy