sun blade 100 test-all frozen at pci@1f,0/usb/c,3

9 More Discussions You Might Find Interesting

1. Hardware

Could USB ever take over PCI

Internally speaking, for your motherboard bus. Would it be possible for a usb standard to be used in place of the PCI or PCIe bus that is now nearly standard on all PC's? If not, why wouldn't this work?

2. UNIX for Dummies Questions & Answers

SUN BLADE T6340 - which OS ?

Hi, I have server SUN BLADE T6340 and i tried install debian sparc on this machine. Will it work ? In the specification is written only Solaris 10.

3. UNIX for Dummies Questions & Answers

Reinstalling Solaris 9 on Sun Blade 100

For the past ten years I have owned a blade 100, and I had Solaris 9 running on it. Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris...

4. Solaris

Sun Blade 150 not a Sun?

I have recently re-installed Solaris 10 on a Sun Blade 150 followed by a patch set (10_Recommended) dated 2011.12.05. I have just noticed /bin/sun now returns false, rather than true. See below. $ uname -a SunOS myblade1 5.10 Generic_147440-07 sun4u sparc SUNW,Sun-Blade-100 $ /bin/sparc &&...

5. UNIX for Dummies Questions & Answers

Serial Connection sun blade 100 to pc

Hi, If someone please help as my efforts been exhausted in connecting my sun blade 100 serial to my pc. I am using null modem with DB9(female) in sun blade and DB9(female, using gender change) in pc. I am trying both hyper/putty 9600 8 N 1 configurations. Thanks

6. Solaris

Sun Blade 100 cdrom problems...

FYI noob to here and sun blades... I have a sun blade 100 and I can't get the cdrom to work. if i try using vold that doesn't seem to work either...maybe i'm not using it correctly. Upon boot you can open/close the cdrom and it runs but after i'm logged in it won't open and i can't access it...

7. Solaris

Sun Blade 100 Memory Upgrade

Hi, I've been a member for a while but have never posted. I have a Sun Blade 100 desktop and I just installed Solaris 10 and it is unbearably slow. I only have 128 Meg of RAM and need to upgrade. I have searched and found many online resources that have RAM, but I was wondering if anyone has...

8. Solaris

Sun Blade 100 Disk Compatibility

It's me again, I was taking my Sun Blade 100 apart last night to see what kind of drive I have. It is a Seagate ST320011A Barracuda ATA IV 20 GB 7200 RPM Ultra ATA/100 IDE. Now 20 gig ain't all that big anymore and I got to thinking about putting a couple bigger drives in there. although I...

9. Solaris

sun Blade 2000 and XVR100

hello, I have SunBlade 2000 with XVR-1000 graphics card. Xserver won't loaded. I've reinstalled OS 9 ( loaded Driver) nor 10 still won't do it. Anyone has this problem or have any ideas whats' wrong, greatly appreciated!! thanks in adv.

LEARN ABOUT FREEBSD

ehci

EHCI(4) 						   BSD Kernel Interfaces Manual 						   EHCI(4)

NAME

     ehci -- USB Enhanced Host Controller driver

SYNOPSIS

     device ehci

DESCRIPTION

     The ehci driver provides support for the USB Enhanced Host Controller Interface, which is used by USB 2.0 controllers.

     EHCI controllers are peculiar in that they can only handle the USB 2.0 protocol.  This means that they normally have one or more companion
     controllers (i.e., ohci(4) or uhci(4)) handling USB 1.x devices.  Consequently each USB connector is electrically connected to two USB con-
     trollers.	The handling of this is totally automatic, but can be noticed since USB 1.x and USB 2.0 devices plugged in to the same connector
     appear to connect to different USB busses.

SEE ALSO

     ohci(4), uhci(4), usb(4), xhci(4)

HISTORY

     The ehci device driver first appeared in FreeBSD 5.1.

LOADER TUNABLES

     When the kernel has been compiled with options USB_DEBUG, some tunables become available that affect the behavior of ehci.  These tunables
     can be set at the loader(8) prompt before booting the kernel or stored in loader.conf(5).

     hw.usb.ehci.lostintrbug
	     This tunable enables the lost interrupt quirk.  The default value is 0 (off).

     hw.usb.ehci.iaadbug
	     This tunable enables the EHCI doorbell quirk.  The default value is 0 (off).

     hw.usb.ehci.no_hs
	     This tunable disables USB devices to attach like HIGH-speed ones and will force all attached devices to attach to the FULL- or LOW-
	     speed companion controller.  The default value is 0 (off).

BSD
								   March 4, 2012							       BSD

UNIX for Dummies Questions & Answers