How to change ethernet cable of iscsi initiator (iscsi client)?

10 More Discussions You Might Find Interesting

1. HP-UX

ISCSI initiator (client) for HP-UX 10.20

Is there one? If so where can it be found? I have the 10.20 CD set but I don't think that there's an iSCSI initiator on there. Thank you Dave

2. Red Hat

iSCSI issue on RHEL 5

Hello Friends, I am facing issue with the iSCSI configuration on some of our RHEL 5 servers, When I restart the iSCSI service, it triggers the RHEL server reboot. Could you please help me with this issue. Below are the system details : uname -a : Linux za-rac-prd-01.abc.local...

3. Linux

FC, iSCSI, and NAS configuration?

I am using Windows Server 2008R2 as a domain controller to 2 other servers and would like to use my Dell Powervault 770N as my NAS for data storage. I have FC that I would like to implement between the servers and the NAS (as an iSCSI target). I am brand new to this world; is this possible? I am...

4. UNIX for Dummies Questions & Answers

iscsi high availability

Hi, I want to set up a iscsi high availability with sheepdog distributed storage. Here is my system set up. Four nodes with sheepdog distributed storage and i am sharing this storage through iscsi using two nodes as well as using a virtual ip set up using ucarp.Two nodes using same iqn. And...

5. Solaris

Does iscsi initiator supported on SUN

I have a Sun Blade 2500 with SUN 5.9 OS installed. I have configured ISCSI SAN and one of my Red Hat OS can accessed/mount the ISCSI SAN disk Now i want to access/mount another ISCSI SAN disk on SUN solaris. Is that possible ? Thanks

6. AIX

iSCSI troubleshooting

I have an Equallogic SAN that I connect to from AIX (as well as Windows) I had configured the connection and created the volumes and filesystems and all was working great. Then one day, no communication between the SAN and the AIX (I can ping though) Anything I do on the AIX box at this time...

7. Solaris

Iscsi - target + initiator on the same host.

Hi all iscsiadm / iscsitadm. Ive created two devices on a host. # iscsitadm list target Target: 1-disk0 iSCSI Name: iqn.1986-03.com.sun:02:f105ddf3-52a4-ed7a-9590-c3d354b8fc32.1-disk0 Connections: 1 Target: 1-disk1 iSCSI Name:...

8. Filesystems, Disks and Memory

iSCSI client setup difficulties

I am trying to set up iscsi linux clients and am having some problems. iscsid is running, I can do discovery fine, but adding the iscsi lun I get the following error: iscsiadm -m node -T iqn.xxxxxxxxxxxxxx -p y.y.y.y:3260 -l Logging in to iscsid: session already running. iscsiadm: Could not...

9. OS X (Apple)

iSCSI

I have configured iSCSI on server with linux running on it . On APPLE I have downloaded gloablSAN. When globalSAN is started ,it asks for target IP . I have given target IP . It has detected the disks . But when i use "disk utilities " , here the ISCSI disk are not displayed. except the...

10. AIX

iSCSI Configuration help

I just reloaded an IBM P-Series with AIX 5.3 and would like to configure iscsi, can someone point me in the right direction to obtaining the initiator node name? I ran lsattr -El iscsi0 - but the name that is displayed is not the correct name. I read somewhere the default node name is not...

LEARN ABOUT FREEBSD

iscontrol

ISCONTROL(8)						    BSD System Manager's Manual 					      ISCONTROL(8)

NAME

     iscontrol -- login/negotiator/control for an iSCSI initiator session

SYNOPSIS

     iscontrol [-dv] [-c file [-n nickname]] [-p pidfile] [-t target] [variable=value]

DESCRIPTION

     This command, along with its kernel counterpart iscsi_initiator(4), is obsolete.  Users are advised to use iscsictl(8) instead.

     Internet SCSI (iSCSI) is a network protocol standard, that allows the use of the SCSI protocol over TCP/IP networks, the iscontrol program is
     the userland side of an iSCSI session, see iscsi_initiator(4).  It has 2 modes of operation, if -d (discovery session) is specified, it will
     print out the target names returned by the target and exit.  In the second mode, it will, after a successful login/negotiation, run in daemon
     mode, monitoring the connection, and will try to reconnect in case of a network/target failure.  It will terminate/logout the session when a
     SIGHUP signal is received.  The flags are as follows:

     -c file	     a file containing configuration key-options, see iscsi.conf(5).

     -d 	     do a discovery session and exit.

     -n nickname     if -c file is specified, then search for the block named nickname in that file, see iscsi.conf(5).

     -p pidfile      will write the process ID of the session to the specified pidfile

     -t target	     the target's IP address or name.

     -v 	     verbose mode.

     variable=value  see iscsi.conf(5) for the complete list of variables/options and their possible values.

EXAMPLES

	   iscontrol -dt myiscsitarget

     will start a discovery session with the target and print to stdout the list of available targetnames/targetadresses.  Note: this listing does
     not necessarily mean availability, since depending on the target configuration, a discovery session might not need login/access permission,
     but a full session certainly does.

	   iscontrol -c /etc/iscsi.conf -n myiscsi

     will read options from /etc/iscsi.conf, use the targetaddress found in the block nicknamed myiscsi, login and negotiate whatever options are
     specified, and start an iscsi-session.

SEE ALSO

     da(4), iscsi_initiator(4), sa(4), iscsi.conf(5), camcontrol(8), iscsictl(8)

STANDARDS

     RFC 3720

BUGS

     iscontrol should probably load the iscsi_initiator module if needed.
     Not all functions/specifications have been implemented yet, noticeably missing are the Task Management Functions.	The error recovery, though
     not fully compliant does a brave effort to recover from network disconnects.

BSD
								  October 9, 2014							       BSD

UNIX for Dummies Questions & Answers