how to create multiple-boot system with disks mirrored(RAID1+0) and disk alone

10 More Discussions You Might Find Interesting

1. Red Hat

Booting 2nd mirrored boot disk

Hi guys, thanks for helping out. If you have two boot disk mirrored and your primary boot disk fails, how will you boot the system from the second disk? Thank you very much for your assistance on this matter. Arrey

2. Solaris

Need help replacing a mirrored boot disk

I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance. This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect. Two things I believe I'm...

3. Solaris

Boot from Mirrored disk

So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps...

4. Solaris

Are my disks mirrored ?

# metastat d1: Mirror Submirror 0: d11 State: Okay Submirror 1: d12 State: Okay Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 14582208 blocks (7.0 GB) d11: Submirror of d1 State: Okay Size: 14582208 blocks...

5. HP-UX

To identify if local disks are mirrored

Hello All, Am trynig to identify if the local HD's on our BL860 (running 11v3) are indeed mirrored to each other. Cheers, Cameron

6. Solaris

Backup for HW Mirrored Disks

We use SW mirroring (RAID1) using SVM for our SUN servers (which we OEM to end clients with our application on). When I need to make a tape backup for the server (disk), I disable mirroring and perform backup of the entire disk to tape using ufsdump. This process requires an outage and sensitive as...

7. Solaris

Migrate VxVM boot disks to higher capacity disk

Hi, Im getting a downtime of 4 hrs to do porting of bootdisks. Currently, the system is running on Sf4800. 2 internal disk 36G connected to a SE3510 storage. We're getting 72G disks and we want to restore the OS from the current 36G to the 72G disk. System is under veritas volume manager ctrl....

8. Solaris

Creating an image of a mirrored disks

Hi guys, I havent done this before but iam trying to create an image of a mirrorred drive. Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity. How would i create a "flar" image of that one entity...

9. UNIX for Dummies Questions & Answers

Creating create mirrored disk files systems using mkfs command

What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example: machine# mkfs -F ufs /dev/md/dsk/d40 size not specified ufs usage: mkfs special size(sectors) \ -m : dump fs cmd line used to make this partition -V : print this...

10. AIX

checking to see if logical disks are mirrored.

I have AIX 5.1 I ran these commands and was not able to see what disk were mirrored to what. I thought this is what I should do? lslv -m rd |more lslv -m db |more I get a error stating that it can't find or in the device configuation databse. Is there another way to look? I have a physcal...

LEARN ABOUT HPUX

vxbootsetup

vxbootsetup(1M) 														   vxbootsetup(1M)

NAME

       vxbootsetup - set up system boot information on a Veritas Volume Manager disk

SYNOPSIS

       /etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]

DESCRIPTION

       The  vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
       disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk.  All of these volumes must
       be contiguous with only one subdisk.

       The -g option may be used to specify the boot disk group.

       If  no  medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
       be bootable.

       If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.

       vxbootsetup requires that:

       o    The root volume must be named rootvol and must have a usage type of root.

       o    The swap volume must be named swapvol and must have a usage type of swap.

       o    The volumes containing /usr and /var (if any) must be named usr and var, respectively.

       See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on  how  the
       system boots and how VxVM impacts the system boot process.  The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
       If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to  make  the
       disk bootable.

ARGUMENTS

       medianame
	    Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.

SEE ALSO

       disksetup(1M),  edvtoc(1M),  vxassist(1M),  vxevac(1M),	vxinstall(1M),	vxintro(1M),  vxmake(1M),  vxmirror(1M), vxplex(1M), vxresize(1M),
       vxrootmir(1M)

       Veritas Volume Manager Troubleshooting Guide

VxVM 5.0.31.1							    24 Mar 2008 						   vxbootsetup(1M)

UNIX for Advanced & Expert Users