When our SCO UNIXWARE 7.4 System starts up we receive the following log indicating that its not loading successfully.

I have pasted the txt file for review.

Can someone please help?

UX:S69inet: INFO:
The following commands ran from /etc/init.d/inetinits
This command will link the TCP/IP protocol stack.
/usr/sbin/slink

boot
initqp /dev/udp rq 8192 49152
initqp /dev/ip muxrq 8192 49152 muxwq 8192 49152
initqp /dev/tcp muxrq 8192 49152 muxwq 8192 49152
tp /dev/tcp
open /dev/tcp
open returns <FD 3>
open /dev/ip
open returns <FD 4>
plink <FD 3> <FD 4>
plink returns <MUXID 17>
close <FD 3>
tp /dev/udp
open /dev/udp
open returns <FD 3>
open /dev/ip
open returns <FD 4>
plink <FD 3> <FD 4>
plink returns <MUXID 18>
close <FD 3>
tp /dev/icmp
open /dev/icmp
open returns <FD 3>
open /dev/ip
open returns <FD 4>
plink <FD 3> <FD 4>
plink returns <MUXID 19>
close <FD 3>
tp /dev/igmp
open /dev/igmp
open returns <FD 3>
open /dev/ip
open returns <FD 4>
plink <FD 3> <FD 4>
plink returns <MUXID 20>
close <FD 3>
tp /dev/ipip
open /dev/ipip
open returns <FD 3>
open /dev/ip
open returns <FD 4>
plink <FD 3> <FD 4>
plink returns <MUXID 21>
close <FD 3>
tp /dev/rip
open /dev/rip
open returns <FD 3>
open /dev/ip
open returns <FD 4>
plink <FD 3> <FD 4>
plink returns <MUXID 22>
close <FD 3>
UX:S69inet: INFO: This command will initialize addresses, routing, and services.
/usr/sbin/initialize -U

UX:S69inet: ERROR:
TCP/IP startup was not entirely successful. Error messages in /tmp/inet.start
Can not contact SAC
&&
/usr/sbin/ifconfig lo0 127.0.0.1 up >>/tmp/inet.start 2>&1

add_loop reserved_for_ip /dev/loop lo0
open /dev/loop
open returns <FD 4>
dlbind <FD 4> 0x800
dlbind returns
open /dev/ip
open returns <FD 5>
linkint <FD 5> <FD 4> lo0 0x4048
plink <FD 5> <FD 4>
plink returns <MUXID 23>
sifname <FD 5> <MUXID 23> lo0 0x4048
close <FD 5>
close <FD 4>

Running command: /usr/sbin/slink -vc /etc/inet/strcf\
add_interface reserved_for_ip /dev/net0 net0 >>/tmp/inet.start 2>&1 &&
/usr/sbin/ifconfig net0 192.168.1.4 netmask 255.255.255.0 broadcast 192.168.1.255 perf 24576 24576 1 up >>/tmp/inet.start 2>&1

add_interface reserved_for_ip /dev/net0 net0
open /dev/net0
open returns <FD 4>
dlbind <FD 4> 0x800
dlbind returns
open /dev/ip
open returns <FD 5>
linkint <FD 5> <FD 4> net0 0x4042
plink <FD 5> <FD 4>
plink returns <MUXID 24>
sifname <FD 5> <MUXID 24> net0 0x4042
close <FD 5>
open /dev/net0
open returns <FD 4>
dlbind <FD 4> 0x806
dlbind returns
open /dev/arp
open returns <FD 5>
sifhrd <FD 5> ether
linkint <FD 5> <FD 4> net0 0x4042
plink <FD 5> <FD 4>
plink returns <MUXID 25>
sifname <FD 5> <MUXID 25> net0 0x4042
sifaddr <FD 5> net0
close <FD 5>
close <FD 4>

Running command: /usr/sbin/inconfig >>/dev/console 2>&1

Running command: /usr/sbin/syslogd >>/dev/console 2>&1
Listed configuration file is not a found full path name.
ignored: 3:/usr/sbin/in.pppd::y:/etc/inet/ppphosts::

Turned off, ignored: 3a:/usr/sbin/in.dhcpc::N:/etc/inet/dhcpc.conf::


Running command: /usr/sbin/route add default 192.168.1.2 >>/dev/console 2>&1
Listed configuration file is not a found full path name.
ignored: 4b:/usr/sbin/in.gated::Y:/etc/inet/gated.conf::

overiding cmd was not run, continuing to execute cmd 4c:/usr/sbin/in.routed:/usr/sbin/in.gated:Y:::


Running command: /usr/sbin/in.routed >>/dev/console 2>&1

Running command: /usr/sbin/route add 224.0.0.0 192.168.1.4 >>/dev/console 2>&1
Listed configuration file is not a found full path name.
ignored: 5:/usr/sbin/in.named::y:/etc/inet/named.conf::


Running command: /usr/sbin/ntpdate -b 172.16.1.11 172.16.1.21 >>/dev/console 2>&1
Command returned non-zero (256)

Running command: /usr/sbin/in.xntpd >>/dev/console 2>&1

Running command: /usr/bin/sh /etc/inet/rc.inet start >>/dev/console 2>&1
Listed configuration file is not a found full path name.
ignored: 8a:/usr/sbin/in.aasd::y:/etc/inet/aasd.conf::