Phenom II support in kernel

9 More Discussions You Might Find Interesting

1. Solaris

Older OS support in Kernel zones

folks, I have a query. Can we create Kernel zone with the earlier Solaris OS? More precisely Can i create kernel zone with any different OS than that of OS in global zone. As of now in sol11U2 if we create kernel zone, there will be sol11u2 OS in kernel zone since the same is in global. But...

2. IP Networking

[ipv6_test] Kernel is not compiled with IPv6 support

Hello, i tried to enable IPv6 networking and after service network restart i seen these messages: FATAL: Error inserting ipv6 (/lib/modules/2.6.18-348.16.1.el5.028stab108.1/kernel/net/ipv6/ipv6.ko): Device or resource busy CRITICAL : Kernel is not compiled with IPv6 support Bringing up...

3. Linux

Unload kernel module at boot time (Debian Wheezy 7.2, 3.2.0-4-686-pae kernel)

Hi everyone, I am trying to prevent the ehci_hcd kernel module to load at boot time. Here's what I've tried so far: 1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here): 2) Blacklisted the module by adding the following string to 3) Tried to blacklist the module...

4. UNIX for Dummies Questions & Answers

Make sure kernel was compiled with NFS server support

Hi there, I have a Debian Squeeze server. How can I check if my kernel was compiled with NFS server support? Extra question: if it is not, how do I enable NFS support in my kernel? Thanks for your help. Santiago

5. Solaris

Which file is read by kernel to set its default system kernel parameters values?

Hi gurus Could anybody tell me which file is read by kernel to set its default system kernal parameters values in solaris. Here I am not taking about /etc/system file which is used to load kernal modules or to change any default system kernal parameter value Is it /dev/kmem file or something...

6. Linux Benchmarks

AMD Phenom(tm) 9950 Quad-Core Processor, Ram: 3.6 GB, Foxconn 7da-s and Linux 2.6.26-2-amd64

CPU/Speed: AMD Phenom(tm) 9950 Quad-Core Processor Ram: 3.6 GB Motherboard: Foxconn 7da-s Bus: Cache: Controller: Disk: Load: Kernel: Linux 2.6.26-2-amd64 Kernel ELF?: pgms: ============================================================== BYTE UNIX Benchmarks (Version...

7. UNIX for Dummies Questions & Answers

Kernel Support

Hi, I want to learn that all the family of x86 processors are supported by kernel. I want to buy a board, which has VIA ESP10K processor and CHIPSET: VIA CN333 north bridge & VIA VT8237R south bridge Where can I find this? Thanks.

8. Ubuntu

Does Posix support kernel level threading?

Hi All, Please let me know the following. 1) Does POSIX lib support kernel threads? if yes, please let me know what are the specific function calls used to create/manage kernel threads. 2) Is Posix scalable? 3) Does POSIX take the advantage of multiprocessor systems? your help is much...

9. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Hi All, Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff. Cheers, Brendan

LEARN ABOUT NETBSD

kloader

KLOADER(4)						   BSD Kernel Interfaces Manual 						KLOADER(4)

NAME

     kloader -- in-kernel bootloader

SYNOPSIS

     options KLOADER
     options KLOADER_KERNEL_PATH=""/netbsd""

DESCRIPTION

     The kloader is the in-kernel bootloader for platforms that do not have a proper firmware.

     Some platforms supported by NetBSD do not have a firmware that can boot the NetBSD kernel.  Examples are game consoles (dreamcast port), and
     handhelds (hpcarm, hpcmips, and hpcsh ports).  On such platforms the bootloader is usually a host program that runs under the native OS.
     This means that rebooting NetBSD is a lengthy process of booting into the native OS first, launching the bootloader program, and finally
     booting NetBSD again.  This problem is addressed by kloader, which allows the currently running kernel to serve as a bootloader for the ker-
     nel being booted, thus avoiding the burden of booting into the native OS first.

     When kloader is configured into the kernel, a call to reboot(2) causes the kloader to load the new kernel into memory, and arrange for con-
     trol to be passed to the new kernel -- just like a standalone bootloader does.  The new kernel then boots in the ordinary manner.

SEE ALSO

     reboot(2), boot(8), reboot(8)

HISTORY

     kloader first appeared in NetBSD 1.6.

BUGS

     kloader ignores howto and bootstr arguments passed to the reboot(2) system call, and reboots the system with the previous boot settings.

     kloader doesn't support booting compressed kernels.

     The hpcarm port doesn't support kloader yet.

BSD
								   April 3, 2004							       BSD

Ubuntu