Hi everyone,
I changed the batteries on 29-Jun-2008 for the storedges.
But received error messages from the server today,I used the "-u" option to update the service date information but it syntaticaly fails. Why?

Jul 4 12:00:03 auriga SUNWscsdServer[740]: [ID 254836 daemon.error] [SUNWscsd 0x03060409:0x03000000 Informational] <rctrl8001> The battery on (Ch:3,Id:12) is expired on Fri Jul 4 12:00:00 2008 . Please install a new battery. Battery Information is (0x01, 0x44716F80, 0x44AA9080, 0x486DA040). {Unique ID#: 0819ed}
# sccli
Available devices:

1. /dev/rdsk/c8t600C0FF000000000081985313BA09D00d0s2 [SUN StorEdge 3510 SN#081985] (Primary)
2. /dev/rdsk/c8t600C0FF0000000000819ED186A334200d0s2 [SUN StorEdge 3510 SN#0819ED] (Primary)

Please enter selection: 2
sccli> show battery-status
Upper Battery Type: 1
Upper Battery Manufacturing Date: Sat Jun 30 08:00:00 2007
Upper Battery Placed In Service: Sun Oct 28 08:08:36 2007
Upper Battery Expiration Date: Tue Oct 27 08:08:36 2009
Upper Battery Status: good


Lower Battery Type: 1
Lower Battery Manufacturing Date: Sun Apr 13 08:00:00 2008
Lower Battery Placed In Service: Sun Jun 29 08:13:26 2008
Lower Battery Expiration Date: Tue Jun 29 08:13:26 2010
Lower Battery Status: good


# sccli -v output

sccli version 1.5.0

# sccli

Available devices:



1. /dev/rdsk/c8t600C0FF000000000081985313BA09D00d0s2 [SUN StorEdge 3510 SN#081985] (Primary)

2. /dev/rdsk/c8t600C0FF0000000000819ED186A334200d0s2 [SUN StorEdge 3510 SN#0819ED] (Primary)



Please enter selection: 2

sccli> show battery-status -u

sccli: syntax error: "-u"

sccli> version

sccli version 1.5.0

sccli> show inquiry

Vendor: SUN

Product: StorEdge 3510

Revision: 327R

Peripheral Device Type: 0x0

NVRAM Defaults: 327R 3510 v2.63

Bootrecord version: 1.31H

Page 80 Serial Number: 0819ED186A334200

Page 83 Logical Unit Device ID: 600C0FF0000000000819ED186A334200

Page 83 Target Device ID: 206000C0FF0819ED

IP Address: 10.8.8.202

Page D0 Fibre Channel Address: B2 (id 32)

Page D0 Node Name: 206000C0FF0819ED

Page D0 Port Name: 216000C0FF0819ED

Ethernet Address: 00:C0:FF:08:19:ED

Device Type: Primary

sccli> show battery-status -u

sccli: syntax error: "-u"

Pls advise