Hi all,

I have a compatibly issues with a new hardware

My config is the following one :


Solaris 10
V490 Hardware
2 X HBA Qlogic 2310f cards
An HP EVA 5000 for storage …
Veritas VxVM 4.1 MP1


When I reboot my server, VxVM is trying to mount/use the volume before it’s discovered/available with the SAN.

The Temp solution is to mount manually all the volumes with the following command : vxvol -g loc1vg startall & mountall

The other workaround is to reboot my server each time with the command : reboot -- -r

If I reboot my server with Init 6 :


hba1: QLogic Fibre Channel Host Adapter fcode version 2.00.09
hba1: Firmware v3.3.12 (ipx)
QLogic Fibre Channel Driver v4.20 Instance: 2
hba2: QLogic Fibre Channel Host Adapter fcode version 2.00.09
hba2: Firmware v3.3.12 (ipx)
Hostname: svdlux69
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk

cpqccl288: found array controller device at tgt32, lun0
cpqccl288: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ
cpqccl291: found array controller device at tgt35, lun0
cpqccl291: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ
cpqccl33: found array controller device at tgt33, lun0
cpqccl33: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ
cpqccl34: found array controller device at tgt34, lun0
cpqccl34: Vendor/Product ID = COMPAQ HSV110 (C)COMPAQ

NOTICE: VxVM vxdmp V-5-0-148 enabled path 118/0x30 belonging to the dmpnode 282/0x18

NOTICE: VxVM vxdmp V-5-0-148 enabled path 118/0x38 belonging to the dmpnode 282/0x10

Nov 22 09:28:45 spagent[418]: Starting spagent.

checking ufs filesystems

/dev/vx/rdsk/bootdg/opt: is clean.

checking vxfs filesystems

Running parallel replay fsck ...

/dev/vx/rdsk/loc1vg/loc1lv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/opttivlv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/tivlv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/ccmslv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/bgslv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/toolslv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/ecclv:file system check failure, aborting ...
/dev/vx/rdsk/loc1vg/crashlv:file system check failure, aborting ...

The following filesystems could not be repaired :

/dev/vx/rdsk/loc1vg/loc1lv
/dev/vx/rdsk/loc1vg/ccmslv
/dev/vx/rdsk/loc1vg/opttivlv
/dev/vx/rdsk/loc1vg/tivlv
/dev/vx/rdsk/loc1vg/toolslv
/dev/vx/rdsk/loc1vg/bgslv
/dev/vx/rdsk/loc1vg/ecclv
/dev/vx/rdsk/loc1vg/crashlv

fsckall failed with exit code 1.

WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).

I tried to put Sleep commands on all the scripts files (veritas+ Hp) without success ….

Any ideas ??

Thanks,

Fabien