Hi,

These ports of My T1000 are off.
My Serial Management Port used to work.
It gave me access to the "sc>" window.
Now, i can't see it on my network (with the ZenMap tool)

So, i can't power on (or off) my sun T1000.

Can someone help me ?

Thanks

DId you try to physically power on the machine?

Yes, and I get an IP adress for the machine, so that i can access to my files. But it's not so good for the device...

you can't see the serial port on the network. you can only see the netmgt port. if the netmgt port is NOT up, login with serial line and reset the serviceprocessor. or powerdown the machine and cut the power (for 30 seconds) and replug power. the sc should come up with network. if not, you've to login with serial line and check the setup...

Thx DukeNuke2, i've already done that.
But truth is "Serial Mgt Port" got an IP address.
T1000 serial mgt port is still plugged on the network.
I could access it a few days ago. Now I can't.
I had the "sc> " window. With that, i was able to start and stop properly the server.

If anyone knows about that, you're welcome...

again, the SERIAL port can't have an ip! the NET mgt port has the ip. have you resetet the sc?

Attached Thumbnails