Configuration issue with Tape Library in Solaris 10


 
Thread Tools Search this Thread
Operating Systems Solaris Configuration issue with Tape Library in Solaris 10
# 1  
Old 01-29-2009
Configuration issue with Tape Library in Solaris 10

Env:
Server : Sparc Ultra-80
OS: Solaris 10
Direct SCSI connection to Library. Terminator connected at the Tape End.

Problem: Unable to see any device file related to Robotic /dev/rsst0.
Unable to see any device file /dev/rmt.
------------
Messages while the machine boots

sst0: No response from target 5, lun 0
/dev/rdsk/c0t0d0s5 is clean
/dev/rdsk/c0t0d0s6 is clean
sst1: No response from target 5, lun 0
sst2: No response from target 5, lun 0


Any ideas ?

thanks.
# 2  
Old 01-30-2009
What tape library is being used?
# 3  
Old 01-30-2009
StorEdge L8
# 4  
Old 01-31-2009
do this:
#cd /
#devfsadm -C -c tape -v
#cd /dev/rmt
#rm *
#cd /
#devfsadm -c tape -v
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Add new EML 103e Tape Library in SUN Solaris Host to implement HP DP

Hi, Our environment is SUN Solaris. We have purchased HP EML 103e tape library. Can you please let me know do I need to install any Driver of newly added Tape Library to see from the Solaris Host? or how can i see the tape library from my Solaris hosts. Thanks, Hassan (0 Replies)
Discussion started by: M_Hassan
0 Replies

2. Emergency UNIX and Linux Support

C4 scsci Tape library not detectable after lustarter patching on solaris 10 u4

Hi All, We have patched our solaris 10 u4 server with lustarter patch in order to get it prepared for solaris live upgrade.The patch installation went pretty fine and we did reboot the server after patching.But after patching we have noticed O.S is not able to detect tape library.Not sure what... (22 Replies)
Discussion started by: sahil_shine
22 Replies

3. SCO

Tape Drive Configuration

Dear All, I have a tape drive which has worked for offer 3yrs properly on SCO Openserver Release = 3.2v5.0.5. I tried to clean it all invain. I did a fresh installation of unix of the same OS and did the configuration still didn't bear fruits. The tape is a scsi and the configuration is as... (4 Replies)
Discussion started by: njoroge
4 Replies

4. Solaris

Solaris 10 and DELL TL-2000 Tape Library with ISCSI

Hello, i am trying to get following configuration up running, but get no access to the library roboter. Server: SunOS 5.10 Generic_138889-03 i86pc i386 i86pc DELL TL-2000: 1 Tape: IBM ULT3580-HH4 and Robot: 3573-TL, connected via ISCSI Bridge (build into the TL) ... (1 Reply)
Discussion started by: austin73
1 Replies

5. Solaris

C4 tape library

Hi all , Anybody has an installation manual for Sun StorageTek C4 tape library . i am trying to do the installation on a Sun Fire V245 . Thanks a million cheers ppass (4 Replies)
Discussion started by: ppass
4 Replies

6. AIX

Tape Library on Aix

I am having my 14 Aix 5.3 servers on bladecenters connected with my Tape Library. I had a backup scheduled on tape library but after taking backup successfully, Now, Question 1:- I wanted to restore backup but tape library could not recognize the tape and I get I/O error in TSM. I think it... (0 Replies)
Discussion started by: Shrek
0 Replies

7. AIX

Tape Library 3583

Hello every body, I have one tape library 3583 but I can't install this some body have ben installed?? when I tray to install it, the output is the next: Method error (/etc/methods/cfgAtape): 0514-022 The specified connection is not valid. some Idea?? thanks greetings (5 Replies)
Discussion started by: xanatos
5 Replies

8. Solaris

Tape Drive Configuration - Help Needed

I have been working on this one for a few days. Any help/advice would be greatly appreciated. Hardware Machine: Sun Blade 2000 Tape Drives: HP Ultrium LTO2 002 (x2) (Inside an L40) Software OS: Solaris 8 st.conf uncommented lines: probe-scsi-all reports both drives. /dev/rmt is... (2 Replies)
Discussion started by: lucesean
2 Replies

9. Solaris

Apache Configuration issue on Solaris

I seem to have an issue with Apache configurationon our Sun solaris Server. Since there are 2 my_app instances running in parallel, the perl modules in my_app_perl_libs are getting shared between them, even though they are in different directories (/u01/my_app and /u01/my_app8). This is because... (1 Reply)
Discussion started by: rahulrathod
1 Replies

10. UNIX for Dummies Questions & Answers

ATL L200 Tape Library and Solaris

I picked up this library but I cannot get the device to actuate. How do I make this work with Solaris 7? (2 Replies)
Discussion started by: n9ninchd
2 Replies
Login or Register to Ask a Question