Can't see Netapp LUN on Solaris using LPFC after reboot.


 
Thread Tools Search this Thread
Operating Systems Solaris Can't see Netapp LUN on Solaris using LPFC after reboot.
# 1  
Old 12-03-2008
Tools Can't see Netapp LUN on Solaris using LPFC after reboot.

Hi,

I've just edited this post. I found the solution for this. Thanks.

Last edited by gwhelan; 12-03-2008 at 11:39 AM.. Reason: Found solution.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Linux

Identify newly attached LUN from NetApp

Hi I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o GNU/Linux I have first run the df -h and got the following: df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_outsystemdb-lv_root 50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies

2. Solaris

How to mount a NetApp snapshoot to a Solaris server?

Hi I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that... (8 Replies)
Discussion started by: fretagi
8 Replies

3. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies

4. AIX

Netapp iscsi lun

Hi, I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name. Please share me the steps to complete this requirements. Thanks in advance. (1 Reply)
Discussion started by: sunnybee
1 Replies

5. UNIX for Advanced & Expert Users

Removing EMC LUN from Solaris 10 host without a reboot

I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help. Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Discussion started by: furby
3 Replies

6. Solaris

Solaris 10 / NetApp volumes - Forbidden: You don't have permission to access...

Hi all We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5 There is a symlink in /app/xxx/jboss-3.2.5 which points to... (0 Replies)
Discussion started by: skewbie
0 Replies

7. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need... (6 Replies)
Discussion started by: gwhelan
6 Replies

8. Solaris

Netapp filer LUN Resize. Commands to run on Solaris afterwards.

Hi, I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Discussion started by: gwhelan
3 Replies

9. Solaris

Use DFM Netapp 3.01 R1 on Solaris 8

I have this problem when i integrate a new san switch in DFM 3.01 R1 : dfm fcswitch add switchname1 Error: Host switchname2 (11197) already exists. switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database. Bests Regards Olivier (2 Replies)
Discussion started by: omainfroy
2 Replies
Login or Register to Ask a Question
ldd(1)							      General Commands Manual							    ldd(1)

NAME
ldd - List dynamic dependencies of executable files or shared objects SYNOPSIS
ldd [-rdV] filename OPTIONS
Prints warnings for any unresolved data symbol references that would occur as a result of filename being executed. (Checks references to only data objects, not functions.) Prints warnings for any unresolved symbol references that would occur as a result of filename being executed. (Checks references to both data objects and functions.) Displays the version of the ldd command. DESCRIPTION
The ldd command lists the dynamic dependencies of an executable file or shared object: If filename is an executable file, ldd lists the pathnames of all shared objects that would be loaded as a result of executing filename. If filename is a shared object, ldd lists the pathnames of all shared objects that would be loaded as a result of loading filename. The ldd command expects shared objects to have exe- cute permission, and if this is not the case, it will issue a warning before attempting to process the file. NOTES
The ldd command does not list shared objects explicitly attached by using dlopen(). The ldd command prints the record of shared object pathnames to stdout. The optional list of symbol resolution problems are printed to stderr. EXIT STATUS
If filename is not an executable file or a shared object, a non-zero exit status is returned. EXAMPLES
The following command lists the static dependencies of libXm.so: ldd /usr/shlib/libXm.so The following command lists the static dependen- cies of libXm.so as well as any unresolved symbol in libXm.so or any of its dependents: ldd -r /usr/shlib/libXm.so SEE ALSO
loader(5) ldd(1)