Can't see Netapp LUN on Solaris using LPFC after reboot.


 
Thread Tools Search this Thread
Operating Systems Solaris Can't see Netapp LUN on Solaris using LPFC after reboot.
# 1  
Old 12-03-2008
Tools Can't see Netapp LUN on Solaris using LPFC after reboot.

Hi,

I've just edited this post. I found the solution for this. Thanks.

Last edited by gwhelan; 12-03-2008 at 11:39 AM.. Reason: Found solution.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Linux

Identify newly attached LUN from NetApp

Hi I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o GNU/Linux I have first run the df -h and got the following: df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_outsystemdb-lv_root 50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies

2. Solaris

How to mount a NetApp snapshoot to a Solaris server?

Hi I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that... (8 Replies)
Discussion started by: fretagi
8 Replies

3. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies

4. AIX

Netapp iscsi lun

Hi, I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name. Please share me the steps to complete this requirements. Thanks in advance. (1 Reply)
Discussion started by: sunnybee
1 Replies

5. UNIX for Advanced & Expert Users

Removing EMC LUN from Solaris 10 host without a reboot

I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help. Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Discussion started by: furby
3 Replies

6. Solaris

Solaris 10 / NetApp volumes - Forbidden: You don't have permission to access...

Hi all We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5 There is a symlink in /app/xxx/jboss-3.2.5 which points to... (0 Replies)
Discussion started by: skewbie
0 Replies

7. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need... (6 Replies)
Discussion started by: gwhelan
6 Replies

8. Solaris

Netapp filer LUN Resize. Commands to run on Solaris afterwards.

Hi, I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Discussion started by: gwhelan
3 Replies

9. Solaris

Use DFM Netapp 3.01 R1 on Solaris 8

I have this problem when i integrate a new san switch in DFM 3.01 R1 : dfm fcswitch add switchname1 Error: Host switchname2 (11197) already exists. switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database. Bests Regards Olivier (2 Replies)
Discussion started by: omainfroy
2 Replies
Login or Register to Ask a Question
reboot(8)						      System Manager's Manual							 reboot(8)

NAME
reboot - Restarts the machine SYNOPSIS
/usr/sbin/reboot [-dlnq] DESCRIPTION
When the system is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation. If no users are logged in, use the reboot command. The reboot command normally stops all running processes, syncs the disks, logs the reboot, and writes a shutdown entry in the login accounting file, /var/adm/wtmp. The reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard- ware time-of-day clock. After these activities, the system reboots. By default, the system starts and the file systems are automatically checked. If the start-up activities are successful, the system comes up in the default run-level. You must have root privileges to use this command. Using the -n flag can result in file system damage. FLAGS
Generates a crash dump of the system before halting it. Can be used with any of the other flags. Does not log the reboot using syslog Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not log the reboot using syslog EXAMPLES
To enable the default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the shutdown, and perform other routine shutdown and reboot activities. To shut down the system without logging the reboot, enter: reboot -l This command shuts down the system and performs all shutdown and reboot activities, except logging the shutdown. To reboot the system abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes. FILES
Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon RELATED INFORMATION
Commands: fsck(8), halt(8), init(8), savecore(8) shutdown(8), syslogd(8) Functions: reboot(2), sync(2), syslog(3) delim off reboot(8)