xserver problem - hang


 
Thread Tools Search this Thread
Operating Systems Solaris xserver problem - hang
# 1  
Old 09-28-2007
xserver problem - hang

Dear
When I restart the Xserver it works fine for less than half an hour and throw this error afterward.

After setting the display DISPLAY=10.195.2.13:0.0, I tried to run xclock. After few minutes it throws this error message

"X connection to 10.195.2.13:0.0 broken (explicit kill or server shutdown)"

That mean Xvfb is not stable on the O/S. How to resolve this problem?


Thanks
Mohammed Tanvir
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Xserver not display

I have this Xserver not display issues, I try search from the forum but found out it can have different errors from the Xerrors logs. Here I upload and hope admin can help. root@ccs # more Xerrors The loadable module for the display device SUNWast is not installed. Fatal server error:... (1 Reply)
Discussion started by: mailbox80
1 Replies

2. Red Hat

Problem in RedHat Cluster Node while network Failure or in Hang mode

Hi, We are having many RedHat linux Server with Cluster facility for availability of service like HTTPD / MySQL. We face some issue while some issue related to power disturbance / fluctuation or Network failure. There is two Cluster Node configured in... (0 Replies)
Discussion started by: hirenkmistry
0 Replies

3. Solaris

Xserver doesn't allow log in

I wanted to modify my Xstarup file so I can have Croatian letters but unfortunately I am unable to log in . What I have done is cp /dev/null /etc/dt/config/Xstartup cat >> /etc/dt/config/Xstartup <<%EOF% keycode 34 = bracketleft braceleft scaron Scaron keycode 35 = bracketright... (8 Replies)
Discussion started by: solaris_user
8 Replies

4. UNIX for Dummies Questions & Answers

Help setting up XServer in Centos 5.4

Hi, After I remove the external video card after setup, Centos 5.4 upon boot cannot start the XServer for the onboard video card. How can I configure XServer to get it working? Machine is a DELL OPTIPLEX 745 (1 Reply)
Discussion started by: mojoman
1 Replies

5. Red Hat

server hang problem

Hello everybody.. I have RHEL-4 Server with kernel - Linux 2.6.9-78.0.1.ELlargesmp x86_64 It is used for Development usage.. That server got hang and so reboot was required, when checked log file i found following messages, kernel: warning: many lost ticks. kernel: Your time source... (4 Replies)
Discussion started by: laxmikant
4 Replies

6. Solaris

Xserver

I have problem with my V490 server which running on solaris 8. The error show on log file X_mkdir: nosuch file or directory Fatal server error: Failed to establish all listening sockets error (pid 299): server unexpectedly died error (pid 299): server for display :0 cant be started ... (1 Reply)
Discussion started by: shamsul
1 Replies

7. UNIX for Advanced & Expert Users

Xserver

Hi, From my workstation (win XP)I open a telnet session on Linux(Red Hat) server. When I issue : # xclock I have : Error: Can't open display: Then : # export DISPLAY=192.16.1.87:0.0 # xclock Error: Can't open display: 192.16.1.87:0.0 Do you have an idea ? Many thanks. (6 Replies)
Discussion started by: big123456
6 Replies

8. UNIX for Dummies Questions & Answers

Looking for recommendations for free Xserver

Hello , im not sure if its the right forum... im sorry if not im working with putty allot , but now I started to work with more graphical applications and im looking for free simple and fast Xserver to remote connection, can someone recommend me if there is something like that ? (3 Replies)
Discussion started by: umen
3 Replies

9. UNIX for Advanced & Expert Users

XServer Fails to start

I've recently patched my AIX box from ML02 to ML06 and somehow along the way the monitor no longer starts up in GUI mode. Running the command xinit gives me the following errros ioctl Bad file Number 1356- Unable to start the X server I've checked the path variables, the monitor, the lai0... (0 Replies)
Discussion started by: mahartle
0 Replies

10. Solaris

Xserver won't come up on Solaris 8

Hi all, My Ultra 10, running Solaris 8, is giving me problems :( Currently, whenever it boots, the Xserver will not come up, saying "Xserver cannot be started on display 0". I thought this might have something to do with OWconfig, and so poked it a little (moving params onto different... (5 Replies)
Discussion started by: Gravity
5 Replies
Login or Register to Ask a Question
XCLOCK(1)						      General Commands Manual							 XCLOCK(1)

NAME
xclock - analog / digital clock for X SYNOPSIS
xclock [ -help ] [ -analog ] [ -digital ] [ -brief ] [ -chime ] [ -hd color ] [ -hl color ] [ -update seconds ] [ -strftime format ] [ -padding number ] [ -norender ] [ -render ] [ -sharp ] [ -face pattern ] DESCRIPTION
The xclock program displays the time in analog or digital form. The time is continuously updated at a frequency which may be specified by the user. OPTIONS
Xclock accepts all of the standard X Toolkit command line options along with the additional options listed below: -help This option indicates that a brief summary of the allowed options should be printed on the standard error. -analog This option indicates that a conventional 12 hour clock face with tick marks and hands should be used. This is the default. -digital or -d This option indicates that a 24 hour digital clock should be used. -brief This option indicates that the digital clock should only display the hours and minutes fields. The default is to show the full time and date information. -utime or -d This option indicates that a digital clock should display seconds since the Epoch (in format '970012340 seconds since Epoch' instead of a standard 24-hour time. -strftime format This option allows an strftime(3) format string to be specified for the digital clock's display. -twelve This option indicates that a digital clock should display the time in twelve hour format. -twentyfour This option indicates that a digital clock should display the time in twenty-four hour format. This is the default when a digital clock is used. -chime This option indicates that the clock should chime once on the half hour and twice on the hour. -hands color (or -hd color) This option specifies the color of the hands on an analog clock. The default is black. This option is effectively ignored when Xrender is in use. -highlight color (or -hl color) This option specifies the color of the edges of the hands on an analog clock, and is only useful on color displays. The default is black. This option is effectively ignored when Xrender is in use. -update seconds This option specifies the frequency in seconds at which xclock should update its display. If the clock is obscured and then exposed, it will be updated immediately. A value of 30 seconds or less will enable a second hand on an analog clock. The default is 60 seconds. -padding number This option specifies the width in pixels of the padding between the window border and clock text or picture. The default is 10 on a digital clock and 8 on an analog clock. -render This option tells xclock to use the Xrender extension to draw an anti-aliased face. This is the default if xclock has been compiled with Xrender support. Note that the color selection options and resources used when Xrender is in effect differ from the standard options. -norender This option turns off the use of Xrender to draw the clock. -sharp This option tells xclock to use sharper edges when drawn using the Xrender extension. -face pattern This option specifies the font to use in digital mode when the Xrender extension is used. X DEFAULTS
This program uses the Clock widget. It understands all of the core resource names and classes as well as: width (class Width) Specifies the width of the clock. The default for analog clocks is 164 pixels; the default for digital clocks is whatever is needed to hold the clock when displayed in the chosen font. height (class Height) Specifies the height of the clock. The default for analog clocks is 164 pixels; the default for digital clocks is whatever is needed to hold the clock when displayed in the chosen font. update (class Interval) Specifies the frequency in seconds at which the time should be redisplayed. foreground (class Foreground) Specifies the color for the tick marks. The default depends on whether reverseVideo is specified. If reverseVideo is specified the default is lwhite, otherwise the default is black. hands (class Foreground) Specifies the color of the insides of the clock's hands. The default depends on whether reverseVideo is specified. If reverseVideo is specified the default is lwhite, otherwise the default is black. Note that this resource is not used when Xrender is in effect. highlight (class Foreground) Specifies the color used to highlight the clock's hands. The default is depends on whether reverseVideo is specified. If reverseVideo is specified the default is lwhite, otherwise the default is black. Note that this resource is not used when Xrender is in effect. analog (class Boolean) Specifies whether or not an analog clock should be used instead of a digital one. The default is True. twentyfour (class Boolean) Specifies whether or not a digital clock should display the time in twenty-four hour format. The default is True. chime (class Boolean) Specifies whether or not a bell should be rung on the hour and half hour. padding (class Margin) Specifies the amount of internal padding in pixels to be used. The default is 8. font (class Font) Specifies the font to be used for the digital clock. Note that variable width fonts currently will not always display correctly. This font is only used when Xrender is not in effect. render (class Boolean) Specifies whether or not the Xrender extension should be used for the display. The default is True if xclock has been compiled with Xrender support. When Xrender is in effect, the following additional resources are understood: face (class FaceName) Specify the pattern for the font to be used for the digital clock when Xrender is used. sharp (class Boolean) Specifies if sharp edges should be used when rendering the clock. The default is False. buffer (class Boolean) Specifies that the updates of the image are drawn to a pixmap before copied into the window instead drawing them into the window directly. The defaults of the following color resources depend on whether reverseVideo is specified. If reverseVideo is specified the default is lwhite, otherwise the default is black. hourColor (class Foreground) The color of the hour hand. minuteColor (class Foreground) The color of the minute hand. secondColor (class Foreground) The color of the second hand. majorColor (class Foreground) The color of the major scale ticks (i. e. each five minutes). minorColor (class Foreground) The color of the minor scale ticks (between major ticks). WIDGETS
In order to specify resources, it is useful to know the hierarchy of the widgets which compose xclock. In the notation below, indentation indicates hierarchical structure. The widget class name is given first, followed by the widget instance name. XClock xclock Clock clock ENVIRONMENT
DISPLAY to get the default host and display number. XENVIRONMENT to get the name of a resource file that overrides the global resources stored in the RESOURCE_MANAGER property. FILES
/usr/X11R6/lib/X11/app-defaults/XClock specifies required resources SEE ALSO
X(7), xrdb(1), time(3C) BUGS
Xclock believes the system clock. When in digital mode, the string should be centered automatically. AUTHORS
Tony Della Fera (MIT-Athena, DEC) Dave Mankins (MIT-Athena, BBN) Ed Moy (UC Berkeley) XFree86 Version 4.7.0 XCLOCK(1)