Login or Register to Ask a Question and Join Our Community


Solaris

ILOM Configuration in Galaxy x4100 server

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris ILOM Configuration in Galaxy x4100 server
# 1  
Old 12-07-2006
MySQL ILOM Configuration in Galaxy x4100 server
Hai All

I rquire a small help for Galaxy x4100 server, when we are trying to sepup
ILOM through CLI it gives following error on commitpending=true steps.

set pendingipaddress=172.21.142.158

Set 'pendingipaddress' to '172.21.142.158'

-> set pendingipgateway=172.21.142.5
Set 'pendingipgateway' to '172.21.142.5'

-> set pendingipnetmask=255.255.255.0
Set 'pendingipnetmask' to '255.255.255.0'

-> set pendingipdiscovery=static
Set 'pendingipdiscovery' to 'static'

-> set commitpending=true
set: Invalid command syntax
Usage: set [target] <property>=value> [<property>=<value>...]


-> show

/SP/network
Targets:

Properties:
commitpending = (Cannot show property)
ipaddress = (none)
ipdiscovery = (none)
ipgateway = (none)
ipnetmask = (none)
macaddress = (none)
pendingipaddress = 172.21.142.158
pendingipdiscovery = static
pendingipgateway = 172.21.142.5
pendingipnetmask = 255.255.255.0

Commands:
cd
set
show
When we try to setup ILOM ip address through BIOS it displays message BMC
not responding.

Is there any recomended Bug fixing patch for this

Rgds
Suresh
# 2  
Old 01-20-2007
For This Issue I logged a call in SUN and replaced the Service Process Board.

Its Working Fine. Smilie
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Web Development

SMTP Server Configuration

Hello list, I want to be able to send email directly from my linux box. I have both a CentOS and Debian installation. I am by no means an expert when it comes to all of the SMTP servers. I have been testing different configs by installing and uninstalling sendmail, postfix, and exim4. ... (2 Replies)
Discussion started by: landossa
2 Replies

2. Hardware

Multi-bit ECC Error on X4100 M2 Server Sun Fire

I have a problem, I have been installing Redhat Interprise Linux on X4100 M2 Server, when system is reboot after install, the server is restart (reboot) again (alias unlimited). The bios system show message error "Multi-bit ECC Error" and "bank interleave requested but not enable" I have... (5 Replies)
Discussion started by: hhaswan
5 Replies

3. Solaris

Sunfire X4100 server

Hi, I am currently on Sunfire X4100. This server doesn't have CDROM drive. Also I can't get to the OK prompt. From my laptop, I am connected to the management port using the Cisco Blue cable. Please advise how can I get to the OK prompt. Also the server is so loud. Will the FAN cool... (1 Reply)
Discussion started by: samnyc
1 Replies

4. SCO

Server Configuration

hi, I am new to this forum as well new to unix . i also wish to know the commands to find out the configuration of our server. i did try these commands uname -a and it gave this unixware agk2 5 7.1.4 i386 x86at sco unix - svr5. i did try out these commands to get more info on cpu... (11 Replies)
Discussion started by: lacchhii
11 Replies

5. Solaris

Access to ILOM (V440 server)

I have ALOM working on our V440 server but is there a way to get ILOM working on this server? (8 Replies)
Discussion started by: New2Sol
8 Replies

6. Solaris

ILOM question on T5120 server

I have a T5120 server and we found out on a security scan that the web interface for the ILOM is enabled. I have been trying to find this information in the wonderful documentation but have not been successful. Does anyone know if you need the http/https enabled on the ILOM for the serial... (4 Replies)
Discussion started by: rkruck
4 Replies

7. Solaris

ntp server configuration

hi Please give me the configuration steps for NTP server. How do i sync other servers with this NTP server thanks to all (1 Reply)
Discussion started by: sijocg
1 Replies

8. Linux

FTP server configuration!

Hello, I use fedora linux. I want to configure my FTP server. Actually, I don't know anything about this server except that I know I have installed it. Please guide me with this. Thx (1 Reply)
Discussion started by: HSN
1 Replies

9. SCO

Print server configuration

Hi, Any one can help me to configure print server in SCO Unixware. I don't have any idea in this context. Any help would be highly appreciated. Best Regards, Tayyab (1 Reply)
Discussion started by: tayyabq8
1 Replies
Login or Register to Ask a Question