dd command


 
Thread Tools Search this Thread
Operating Systems Solaris dd command
# 1  
Old 02-22-2006
dd command

My machine has 2 hard disks. I have installed Solaris 10 in disk0 of my machine. I used dd command to copy from one disk to the other disk. The disk capacity is 73GB.

I gave the following command:
dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2

I waited for four days but the process did not terminate. How long will it take to copy one disk to the other?

Thanks,
Savitha
# 2  
Old 02-22-2006
What type of machine is this? Whatr type of disks (IDE, SCSI, fiber channel, etc.)? How big is the disk? Is the OS on c1t0d0 on other slices, or is there heavy O/O on that disk?
# 3  
Old 02-22-2006
Timely question! I started a 73 GB dd disk copy a few hours ago. Unfortunately, both disks are on the same scsi controller. This is on an HP rp3440. I have glance running watching the dd process. glance can continuously update the display just like top does. By watching the file offsets I can see how fast the dd is progressing. I am getting almost 5GB/hour. And I thought this was slow. 4 days! whoa....

My command line:
Code:
dd if=/dev/dsk/source-disk bs=10485760 of=/dev/dsk/destination-disk

Your command line will behave like either:
Code:
dd if=/dev/dsk/source-disk bs=512 of=/dev/dsk/destination-disk
dd if=/dev/dsk/source-disk ibs=512 obs=512 of=/dev/dsk/destination-disk

You need to crank that block size up.

Last edited by Yogesh Sawant; 02-26-2010 at 01:58 PM.. Reason: added code tags
# 4  
Old 02-22-2006
I've always wondered what block size I should be using for a dd copy. Does it differ by hardware (for example a DVD drive vs. a Hard drive)? How does one know what block size to use?

Last edited by dangral; 02-22-2006 at 06:25 PM.. Reason: took out quote
# 5  
Old 02-22-2006
Some day I will benchmark a few runs of dd and find the optimal setting, if there is one. I have only dd'ed magnetic disks. Never dd'ed a cd-rom, let alone a dvd. So I'll stay with what I know. Use the rdsk style device, not the dsk so the data goes to straight your data segment (not via the buffer cache). The rdsk driver has to read whole sectors. If you ask for a piece of a sector, it may not work. Or it may read a sector and discard what you don't want. I stay with a multiple of 1024. Bigger is better than tiny. But after a point, the advantage starts to taper off. 1 MB is the smallest size I would consider trying. I will want to mentally estimate how much is left, etc...so no screwball sizes. I wind up with N * (1 MB) where N is some small integer. 10 MB seems like a nice round number. We have one bad spot on the disk. I expect dd to fail when it gets there. I will restart it on the next 10 MB chunk. So I have doomed myself to having a 10 MB hole in my disk. That is pretty much my thought process as I picked my blocksize.

It would be a disaster to pick a buffer size so large that box starts to page. I have plenty of memory on this box, so no problem there.
# 6  
Old 02-22-2006
I dd from CD-ROM and DVD quite often to make iso images for mounting under VMWare ESX server. I always use a bs=512 in the dd command when creating the ISOs. I've never timed it, but also never been disappointed with performance - most data I've ever dd'd from optical media is around 1.4Gb.

Cheers
ZB
# 7  
Old 02-23-2006
dd command

The disks are under a SCSI controller. Solaris 8 has been installed in c1t0d0. 4 days is indeed long time.

Regards,
Savitha
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Another one line command where I'd like to determine if Ubuntu or Red Hat when running command

Hello Forum, I'm making very good progress on my report thanks to the very helpful people on this forum. I've been able to successfully create my report for my Red Hat servers. But I do have a few ubuntu servers in the mix and I'd like to capture some data from them when an ssh connection is... (8 Replies)
Discussion started by: greavette
8 Replies

2. AIX

I'm facing problem with rpm command, when running the command and appears this error:

exec(): 0509-036 Cannot load program /usr/opt/freeware/bin/rpm because of the following errors: 0509-022 Cannot load module /opt/freeware/lib/libintl.a(libintl.so.1). 0509-150 Dependent module /opt/freeware/lib/libiconv.a(shr4.o) could not be loaded. 0509-152 Member... (4 Replies)
Discussion started by: Ohmkar
4 Replies

3. Shell Programming and Scripting

Multiple command execution inside awk command during xml parsing

below is the output xml string from some other command and i will be parsing it using awk cat /tmp/alerts.xml <Alert id="10102" name="APP-DS-ds_ha-140018-componentFailure-S" alertDefinitionId="13982" resourceId="11427" ctime="1359453507621" fixed="false" reason="If Event/Log Level(ANY) and... (2 Replies)
Discussion started by: vivek d r
2 Replies

4. Shell Programming and Scripting

SH script, variable built command fails, but works at command line

I am working with a sh script on a solaris 9 zone (sol 10 host) that grabs information to build the configuration command line. the variables Build64, SSLopt, CONFIGopt, and CC are populated in the script. the script includes CC=`which gcc` CONFIGopt=' --prefix=/ --exec-prefix=/usr... (8 Replies)
Discussion started by: oly_r
8 Replies

5. UNIX for Dummies Questions & Answers

passing command output from one command to the next command in cshell

HI Guys, I hope you are well. I am trying to write a script that gets executed every time i open a shell (cshell). I have two questions about that 1) I need to enter these commands $ echo $DISPLAY $ setenv $DISPLAY output_of_echo_$display_command How can i write a... (2 Replies)
Discussion started by: kaaliakahn
2 Replies

6. UNIX for Advanced & Expert Users

unix command : how to insert text at the cursor location via command line?

Hi, Well my title isn't very clear I think. So to understand my goal: I have a script "test1" #!/bin/bash xvkbd -text blabla with xbindkeys, I bind F5 key in order it runs my test1 script So when I press F5, test1 runs. I'm under Emacs/Vi and I press F5 in order to have "blabla" be... (0 Replies)
Discussion started by: xib.be
0 Replies

7. Shell Programming and Scripting

Need help! command working ok when executed in command line, but fails when run inside a script!

Hi everyone, when executing this command in unix: echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error. here is content of my script: tdbsrvr$ vi hc.sh "hc.sh" 22 lines, 509... (4 Replies)
Discussion started by: 4dirk1
4 Replies

8. AIX

AIX:Command to get netaddress/subnet address command in IPv4/IP6

AIX:Command to get netaddress/subnet address command in IPv4/IP6 Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine. net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Discussion started by: rookie8278
2 Replies

9. Shell Programming and Scripting

assign a command line argument and a unix command to awk variables

Hi , I have a piece of code ...wherein I need to assign the following ... 1) A command line argument to a variable e.g origCount=ARGV 2) A unix command to a variable e.g result=`wc -l testFile.txt` in my awk shell script When I do this : print "origCount" origCount --> I get the... (0 Replies)
Discussion started by: sweta_doshi
0 Replies

10. SuSE

inconsistent ls command display at the command prompt & running as a cron job

Sir, I using the following commands in a file (part of a bigger script): #!/bin/bash cd /opt/oracle/bin ls -lt | tail -1 | awk '{print $6}' >> /tmp/ramb.out If I run this from the command prompt the result is: 2007-05-16 if I run it as a cron job then... (5 Replies)
Discussion started by: rajranibl
5 Replies
Login or Register to Ask a Question