Login or Register to Ask a Question and Join Our Community


Solaris

External Network Connectivity w/Oracle VM Server for SPARC & Solaris 11

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris External Network Connectivity w/Oracle VM Server for SPARC & Solaris 11
# 8  
Old 02-09-2015
Lyxix, not sure if this is still an issue. I am trying to accomplish a similar thing, namely, to create a private virtual network of ldoms on a Solaris 11 host, but with IP forwarding and NAT so they can reach the external network.

At the end of your step 7, try enabling the ipfilter service like this:

svcadm enable network/ipfilter
This User Gave Thanks to adeodax For This Post:
Lyxix
# 9  
Old 02-09-2015
I am still having this issue - still stuck without network accessibility for my LDOMs.

I did verify that ipfilter was on:

Code:
root@scphys4:~# svcs | grep ipfilter
online         Nov_22   svc:/network/ipfilter:default

Thanks for the suggestion, though!
# 10  
Old 02-11-2015
So I use a similar setup... here's some comments.
first my setup from the bottom up..

dladm show-phys
Code:
LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE
net1              Ethernet             down       0      unknown   igb1
net12             Ethernet             down       0      unknown   nxge3
Xgb2              Ethernet             up         10000  full      ixgbe2
Xgb3              Ethernet             down       0      unknown   ixgbe3
net10             Ethernet             down       0      unknown   nxge1
net11             Ethernet             down       0      unknown   nxge2
net0              Ethernet             down       0      unknown   igb0
Xgb1              Ethernet             down       0      unknown   ixgbe1
net9              Ethernet             down       0      unknown   nxge0
Xgb0              Ethernet             up         10000  full      ixgbe0
net13             Ethernet             down       0      unknown   nxge7
net15             Ethernet             down       0      unknown   nxge5
net17             Ethernet             down       0      unknown   nxge6
net14             Ethernet             down       0      unknown   nxge4
net3              Ethernet             down       0      unknown   igb5
net2              Ethernet             down       0      unknown   igb4
vsw0              Ethernet             up         10000  full      vsw0
vsw1              Ethernet             up         10000  full      vsw1
net8              Ethernet             up         10     full      usbecm2

ldm list -o network primary
Code:
 
NAME
primary
MAC
    00:10:e0:XX:XX:XX
VSW
    NAME             MAC               NET-DEV   ID   DEVICE     LINKPROP   DEFAULT-VLAN-ID PVID VID                  MTU   MODE   INTER-VNET-LINK
    vsw0             00:14:4f:XX:XX:XX Xgb2      0    switch@0              1               2    222,102,103,12       1500         on
    vsw1             00:14:4f:XX:XX:XX Xgb0      1    switch@1              1               102  222,2,103            1500         on

ldm list -o network adml3
Code:
 
NAME
adml3
MAC
    00:14:4f:XX:XX:XX
NETWORK
    NAME             SERVICE                     ID   DEVICE     MAC               MODE   PVID VID                  MTU   MAXBW      LINKPROP
    adml3_151        vsw0@primary                0    network@0  00:14:4f:XX:XX:XX        12   2,222,102,103        1500
    adml3_10         vsw1@primary                1    network@1  00:14:4f:XX:XX:XX       102  222,103,2            1500

so two 10GBE physical NIC's (Xgb0 and Xgb2), one DHCP, one not. two virtual switches, one for each NIC, then two vnet's in the LDOM one for each virtual switch.

no routing, no IPF, in fact the route service is turned off.

if I really wanted to get fancy I would do an aggregate and assign it to the vsw for failover. also I have vlans set. Sometimes it just nice to see a working config to compare to. Let the questions begin.... Smilie
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Red Hat

Migrating Oracle on Solaris Sparc to Linux RHEL 7 VM

Hi Gurus, We are migrating Oracle from Solaris to RHEL 7 and looking for Solaris equivalent commands for Linux. we are using lot of korn shell scripts built on Solaris so, i am looking for equivalent commands which are using in Solaris.. Could you please help me here by proving any info ... (4 Replies)
Discussion started by: mssprince
4 Replies

2. Shell Programming and Scripting

Migrating Oracle on Solaris Sparc to Linux RHEL 7 VM

Hi Gurus, We are migrating Oracle from Solaris to RHEL 7 and looking for Solaris equivalent commands for Linux. we are using lot of korn shell scripts built on Solaris so, i am looking for equivalent commands which are using in Solaris.. Could you please help me here by proving any info... (1 Reply)
Discussion started by: mssprince
1 Replies

3. Shell Programming and Scripting

Help with shell script to check the tcp network connectivity between server

Hello, I have a requirement to check the tcp network connectivity between server it's running on and the list of host's and ports combination. i have written the below code but it doesn't work, but when i execute the nc command outside the script it works fine. please help me where i am... (8 Replies)
Discussion started by: sknovice
8 Replies

4. Solaris

What are Solaris 9 & 10 Sparc Editions worth?

My Sparc servers disappeared in my last move. I found my Sparc software in the basement yesterday, Solaris 9 9/04 Operating Environment, Java Enterprise System, Accessory Software, and License are all sealed, box is opened. Also have Solaris 10 but in opened sleeves with Sun Office for Sparc. ... (2 Replies)
Discussion started by: FatGeek
2 Replies

5. UNIX for Dummies Questions & Answers

External Network Adapter for Solaris 10

Hi All, I am new here - this is my first post. I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the... (1 Reply)
Discussion started by: soulmerchant
1 Replies

6. Solaris

USB External Hard Drive for Solaris 10 Sparc

Hi- I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform. I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Discussion started by: agfa_109
3 Replies

7. Solaris

Solaris 10 install doesn't display Network Connectivity prompt page

I have two Dell x86 machines on which I am attempting to install Solaris 10 from CD. I am not doing a Jumpstart install. This is my first experience in installing Solaris (or any other OS). I am following the instructions at How to Quickly Install the Solaris 10 1/06 OS The first machine... (3 Replies)
Discussion started by: sarahsi
3 Replies

8. Solaris

[help]network error after reboot server v890 sparc

hi expert, i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below : Setting default IPv4 interface for multicast: add net 224.0/4: gateway... (5 Replies)
Discussion started by: bucci
5 Replies

9. Solaris

How to check Oracle odbc connectivity in solaris ?

Hi, I have my application and database servers running on solaris. I need to check Db connectivity for a datasource in my Db server. Please guide me how to do it in solaris env. Aru (2 Replies)
Discussion started by: aarora_98
2 Replies
Login or Register to Ask a Question