Sun Fire V440 and Patch 109147-39


 
Thread Tools Search this Thread
Operating Systems Solaris Sun Fire V440 and Patch 109147-39
# 1  
Old 11-26-2005
Sun Fire V440 and Patch 109147-39

Got an curious issue.

I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on.

The patch modified mainly the linker libraries and commands.

I'm curious as to why it broke on just the V440s. Since they're all jumpstart installations, they should all have similar configurations.

Side Note and question:

I booted the Solaris 8 CD, broke the mirror, backed off the changed files and copied the ones from the CD to the server.

Worked great on the second box but the first one halted at the Hardware Watchdog Enabled text. No indication as to why. I used the second mirror and brought the system back up.

Because of the full debugging, it took most of the day though (9:30am to 6:40).

Thanks.

Carl
# 2  
Old 11-28-2005
I've not seen a problem like yours before, but I have one idea you could check out. Were the other systems that worked ok V440 or were they older hardware? I've had a jumpstart problem before where the version of Solaris I was installing wasn't the latest hardware release, so newer systems were screwed up. Either they wouldn't jumpstart or were flaky when they were done. Maybe you have a situation like that where some missing HW support package wasn't causing problems before but now that patch expected it to be there and broke.

A longshot I know, but something you could check.
# 3  
Old 11-28-2005
Quote:
Originally Posted by rhfrommn
I've not seen a problem like yours before, but I have one idea you could check out. Were the other systems that worked ok V440 or were they older hardware? I've had a jumpstart problem before where the version of Solaris I was installing wasn't the latest hardware release, so newer systems were screwed up. Either they wouldn't jumpstart or were flaky when they were done. Maybe you have a situation like that where some missing HW support package wasn't causing problems before but now that patch expected it to be there and broke.

A longshot I know, but something you could check.
Yea, after some thought, I was coming up with something similar. Most of the other systems are UltraAX-i2's with a 60 and a couple of Ultra4's thrown in for good measure. These are new systems. I didn't set up the jumpstart for them, but I believe we had to go to a newer version of 8 to support the hardware.

I thought of that and the patch installation directory. We typically install from /tmp or /var/tmp but the patchadd docs do say it's expecting it from /var/sadm/spool/patch and it does act odd sometimes if it's not in /tmp (ownership issues since patchadd is su'ing to nobody to run pkgadd).

Thanks for the reply though.

Carl
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies

2. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies

3. Solaris

Sun-Fire V440 boot disk issue

Hi, I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken. Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies

4. Solaris

Sun Fire v440 Over heat Problem.

Dear Team, I need some expert advice to my problem. We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies

5. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies

6. Solaris

ALOM wont work when KVM connected to Sun Fire V440 server

Hi, I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection. ... (0 Replies)
Discussion started by: jimmy54321
0 Replies

7. Solaris

error messages in Sun Fire V440

Hello, I am seeing error messages in V440 (OS = solaris 8). I have copied here : The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day.. I... (5 Replies)
Discussion started by: upengan78
5 Replies

8. Solaris

Sun Fire v440 hardware problem (can't get ok>)

First of all it's shut down 60 second after power on and write on console : SC Alert: Correct SCC not replaced - shutting managed system down! This is cured by moving out battery from ALOM card. Now server start to loop during the testing. That's on the console: >@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies

9. Solaris

Sun Fire 280R Sun Solaris CRT/Monitor requirements

I am new to Sun. I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor? Thanks. (3 Replies)
Discussion started by: bramptonmt
3 Replies

10. Solaris

Sun Fire v440 keeps shutting down

Hello, I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies
Login or Register to Ask a Question