Login or Register to Ask a Question and Join Our Community


Solaris

System reboot shows blank screen

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris System reboot shows blank screen
# 8  
Old 07-15-2013
I tried ping command with ip address,
but it was not pinging result is request time out.
if the server is ok then it should allow to connect the application.
the application is also not be
access.

I tried telnet command also but no response
# 9  
Old 07-17-2013
ya i found the problem it was from the graphics card. we remove the car and got into ALOM
and tried to poweron the machine but at the end some error while opening the disk its showing. can you tell me what are the command to give if there is disk read error.
# 10  
Old 07-17-2013
Disk read error? Sounds like a defective disk.

The following assumes it wants to boot from the defective disk.
Do you have redundant OS disks i.e. mirrored?
Then pull the defective disk and (if correctly configured) it will boot from the second disk.
# 11  
Old 07-17-2013
how to identify the defective disk,
md:du2: read error on /dev/dsk.coc7d0 error=5
showing something like this

---------- Post updated at 06:30 AM ---------- Previous update was at 06:29 AM ----------

where to check the logs so that i can show u the exact error it showing
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. HP-UX

Get blank screen when killing a UNIX session on HP-UX

Hi, I have this Unix script that kills a user session. When I run it, my screen goes blank. How do I prevent the blank screen? Ex: I open 2 Unix sessions. The main PID for my 1st session is 1234. In the second session I issue a "kill -HUP 1234". The first session gets killed but the second... (5 Replies)
Discussion started by: rm-r
5 Replies

2. Ubuntu

Blank Screen after logoff server via vnc Viewer.

Hello All, I have installed VNC Server on Ubuntu system to access this system from windows machine i'm using VNC Viewer. When i logged off the server from windows machine through VNC Viewer its showing blank screen only... Kindly help. Regards, Purushottam Aher (0 Replies)
Discussion started by: purushottamaher
0 Replies

3. Ubuntu

Blank screen after upgrade from 11.10 to 12.04!

Hello, I got blank screen when reboot after I tried to upgrade Ubuntu (64 bit server version) from 11.10 to 12.04 at update manager. The normal login GUI is missing, but mouse cursor is fine. Then I switched to terminal (tty1 ~ tty6), which looked fine and showed it is Ubuntu 12.04 ! (Forgot how... (4 Replies)
Discussion started by: yifangt
4 Replies

4. AIX

xp to aix - telnet blank screen

hello, i am trying to test connection to a 5.3 box. from an xp machine, telnet connects but shows only a blank screen. cursor moves as i type, but no response back. have used telnet, putty and accuterm - all same result verified that telnet services are active in xp xp windoze firewall is... (10 Replies)
Discussion started by: allenhibbert
10 Replies

5. Solaris

Screen blank on boot up

I have a SunFire V490 Recently when the server is rebooted the screen goes blank from when the CDE is shutdown to when it is started up again. Has anyone got any ideas what might be causing this? I've had a quick look in messages but can't find anything in there. I've had a look at... (2 Replies)
Discussion started by: sonic72
2 Replies

6. Shell Programming and Scripting

Bash script [Press Tab] Screen Blank..

Dear Member, OLD Question --> disable-completion not solved My bash Menu script ping process problem. If ping still running and users press SCREEN is Blank... Cant Members help me.. kill signal or others scripting for my case, btw i use Linux.. Thanks, Rico My Bash Script : ... (1 Reply)
Discussion started by: carnegiex
1 Replies

7. Solaris

Blank screen on crt

Hello I'm new in sun and i have a liitle problem. I buy sun enterprise 420r and connect keyboard and monitor crt (non Sun). But when i start server i have blank screen on crt. I'm new in sun servers and i dont know why its doin this. (11 Replies)
Discussion started by: elmik
11 Replies

8. Solaris

Solaris box shows blank screen after power up

Hi All, I have a solaris machine that powers up and displays a blank screen? All the keyboard, monitor and mouse are plugged in. It was booting fine before and when it was disconnected and re-connected (mouse/keyboard/monitor) it just powered on and came up with a blank screen. Please... (5 Replies)
Discussion started by: tlee
5 Replies

9. Solaris

Blank GRUB Screen

Hello. I had installed solaris 10 in morning , and all was running fine... I just logged out and logged in with another user ID oracle - It got stuck and then I pressed the button for restart. Now I see only word GRUB written in top line rest everything is black. What to do? (2 Replies)
Discussion started by: panchpan
2 Replies

10. HP-UX

Data protector GUI gives Blank screen

Hi, Haveing a little trouble with data protector (5.5) on HP-UX (11.11, 11.23) under Xwindows Chameleon UNIX 97 (7.0 - its a old version) I am trying to get the GUI for DP up and running on a HP-UX cell manager and I have the following problem. The GUI starts up with no errors that I can... (2 Replies)
Discussion started by: Andrek
2 Replies
Login or Register to Ask a Question